Enhance Your BMW's Cornering Performance with This Strut Tower Bar

Looking to minimize chassis flex during demanding cornering with your BMW? Your search ends here. This meticulously crafted front strut tower bar is the solution you've been seeking. Tailored for BMW enthusiasts, it expertly connects the front strut towers, significantly reducing chassis flex and elevating stability during intense cornering maneuvers.

Key Features:

• Chassis Flex Mitigation: Engineered with precision, this strut tower bar effectively mitigates chassis flex, ensuring your BMW maintains a solid and responsive stance during aggressive cornering.
• Improved Cornering Performance: Experience a notable enhancement in your BMW's cornering performance, granting you more control and confidence in every turn.
• Custom Fit for BMW: This bar is exclusively designed for BMW vehicles, ensuring a perfect fit and maximum performance enhancement.
• Enhanced Stability: By connecting the front strut towers, it elevates overall stability, making your BMW even more poised and responsive on the road.
• Turner Motorsport Approved: With the backing of Turner Motorsport's reputation for quality, rest assured that this strut tower bar meets the highest standards.

Elevate your BMW's cornering performance and reduce chassis flex with this front strut tower bar. Turner Motorsport has the solution you've been looking for.

Enhance your BMW's handling prowess with ECS Tuning's Carbon Fiber Strut Tower Bar. This lightweight and incredibly rigid strut bar kit braces the shock towers together, preventing flex and alignment changes during aggressive driving. Crafted from carbon fiber, it not only offers a lightweight solution but also adds an attractive touch to your engine bay.

• Prevents strut tower flex and alignment changes during aggressive driving
• Lightweight and rigid carbon fiber construction
• Adds a unique and stylish look to your engine bay
• High gloss carbon fiber bar with silver CNC machined tower plates and stainless steel hardware
• Not compatible with SULEV M56 engine models

If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.

Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.

This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.

The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.

We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.

Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.

Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.

The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).

If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!

Please note:

• You cannot buy the SRPs and attach the cross-bar at a later time.
• The brace does not directly fit on the R50 and R52 Non-"S" Cooper due to limited hood clearance of the non-supercharged cars. It will fit but may push up on the hood slightly, requiring molding or cutting of the hood insulation after installation.
• Trimming of the underhood insulation material may be required to fully clear this brace. This is a very tight space.

This carbon fiber strut brace uses a flat-oval design with a hinge-less mounting system that makes this one of the best strut braces on the market (especially at the price!). Cornering forces can put stress on the chassis, especially when used with stickier tires and stiffer suspensions.Strut braces help to reduce chassis flex by tying the two strut towers together. This design is stronger than most strut braces that use a hinge on the end that allows additonal flex. This design has fixed end mounts that the strut bar is bolted to. The slim oval tube is 100% carbon fiber for excellent strength and rigidty. The entire assembly is less than 5lbs and installs in minutes.

Fitment note: the end plates on this brace are closed. Some aftermarket front struts have an extra tall strut pin that will interfere with this brace.

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi

This carbon fiber strut brace uses a flat-oval design with a hinge-less mounting system that makes this one of the best strut braces on the market (especially at the price!). Cornering forces can put stress on the chassis, especially when used with stickier tires and stiffer suspensions.Strut braces help to reduce chassis flex by tying the two strut towers together. This design is stronger than most strut braces that use a hinge on the end that allows additonal flex. This design has fixed end mounts that the strut bar is bolted to. The slim oval tube is 100% carbon fiber for excellent strength and rigidty. The entire assembly is less than 5lbs and installs in minutes.

Fitment note: the end plates on this brace are closed. Some aftermarket front struts have an extra tall strut pin that will interfere with this brace.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible