Front Strut Bars

Dinan Billet Front Strut Tower Brace Bars - BMW G20 3-Series ...

Call In Or Chat For Best Price!

T#:5567104

Part#: D180-0014

Ships in 2 Business Days

Sale - Save 10% $ 349.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 314.95 USD

Add to Wish List

Qty

Sale - Save 10%

$ 349.99

This product was last offered at the strikethrough price on
07-31-2026

$ 314.95 USD

Add to Wish List

The Dinan G2x Strut Tower Braces provide additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. Not only do the braces provide a performance benefit but they replace arguably the biggest eyesore in the factory engine compartment. Transforming the blight that is the factory smashed aluminum tubes into a notable highlight that augments the engine bay rather than detract from it. The attractive black anodized billet aluminum braces can be installed in a matter of minutes and used in conjunction with either the stock or Dinan intake systems with the brace valley (D760-0058 / D760-0059). Features: Improved chassis rigidity. Decreased flex during cornering. Solid black anodized billet aluminum for maximum strength and visual appeal. Compatible with stock and Dinan Intake Systems with brace valley (D760-0058 / D760-0059) Bolt-on installation.

Show More Show Less

Genuine BMW Strut Brace Bracket, Left - 51717895249 - E46 M3 ...

T#:12813

Part#: 51717895249

Ships in 2 Business Days

2% off MSRP $ 123.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 120.99 USD

Add to Wish List

Qty

2% off MSRP

$ 123.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 120.99 USD

Add to Wish List

Connects the strut brace bar to the strut tower.

GENUINE BMW BRACKET LEFT:517160

Genuine BMW Strut bar - right - E82 128i 135i 1M Coupe

T#:181682

Part#: 51618051974

Ships in 2 Business Days

4% off MSRP $ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD

Add to Wish List

Qty

4% off MSRP

$ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD

Add to Wish List

Genuine BMW Spring Dome Strut, Right
This item fits the following BMW Chassis:
E82 1M Coupe,E82

Genuine BMW Strut Bar - left - E82 128i 135i 1M Coupe

T#:181681

Part#: 51618051973

Ships in 5 Business Days

4% off MSRP $ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD

Add to Wish List

Qty

4% off MSRP

$ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.99 USD

Add to Wish List

Genuine BMW Spring Dome Strut, Left
This item fits the following BMW Chassis:
E82 1M Coupe,E82

Dinan Gloss Carbon Fiber Strut Brace Kit - G8x M2, M3, M4

Call In Or Chat For Best Price!

T#:23218032

Part#: D180-0015

In Stock

Sale - Save 10% $ 1,171.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,054.76 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,171.99

This product was last offered at the strikethrough price on
07-31-2026

$ 1,054.76 USD

Add to Wish List

The Dinan G8x Strut Tower Brace provides additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. The lightweight brace is designed with maximum function in mind and includes linking structural elements that completely change the OEM 2-piece strut bar set into one blended system that offers additional strengthening against flex. Not one to take a back seat to functionality, aesthetics are also elevated beyond simple steel bars into striking carbon fiber (matte or gloss) with accents that tie in effortlessly into the highly geometric and angular factory engine bay for an OEM+ feel. The imposing carbon fiber brace can be installed in a matter of minutes and used in conjunction with either the stock or Dinan intake systems. While the brace was designed to specifically tie into the latter for a harmoniously balanced and unified appearance the brace can also stand on its own and elicit nearly as equally an impressive visual. Features: Improved chassis rigidity Decreased flex during cornering Lightweight: 5.6 lbs lighter than stock (Dinan CF: 2.8 lbs vs OEM Steel: 8.4 lbs) 2x2 twill carbon fiber with inset aluminum mounting points for increased strength and improved visual appeal Multiple finish options: Available in Gloss or Matte Twill Carbon (Gloss Twill shown) Designed to mesh seamlessly with the Dinan cold air intake creating an aesthetically unified engine bay Bolt-on installation using factory mounting hardware

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - G20 M340i 330i, ...

T#:637421

Part#: BMSG20BSCB-RED

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Blue - G20 M340i 330i,...

T#:637422

Part#: BMSG20BSCB-BLUE

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Blue - BMW G01 X3, G02 X4, F...

T#:39126850

Part#: BMSBILSCB-BLU

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Genuine BMW OEM M3 strut Bar - E46 M3

T#:12598

Part#: 51717895414

In Stock

7% off MSRP $ 290.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.99 USD

Limited Qty Sale

Add to Wish List

Qty

7% off MSRP

$ 290.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.99 USD

Limited Qty Sale

Add to Wish List

GENUINE BMW FRONT TRANSVERSE ELEMENT:517162

Dinan Aluminum Strut Tower Braces - G29 Z4

Call In Or Chat For Best Price!

T#:21900145

Part#: D180-0016

In Stock

Sale - Save 10% $ 328.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 296.06 USD

Add to Wish List

Qty

Sale - Save 10%

$ 328.99

This product was last offered at the strikethrough price on
07-31-2026

$ 296.06 USD

Add to Wish List

The popular 'G' chassis 2/3/4 series strut braces have been modified to now support the G29 Z4! The Dinan G29 Strut Tower Braces provide additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. Not only do the braces inspire confidence but they replace arguably the biggest eyesore in the factory Z4 engine compartment. Transforming the blight that is the factory-smashed aluminum tubes into a notable highlight that augments the engine bay rather than detracting from it. The attractive black anodized billet aluminum braces can be installed in a matter of minutes and used in conjunction with either the stock or aftermarket intake systems that retain OEM clearances. Features: Improved chassis rigidity Decreased flex during cornering Solid black anodized billet aluminum for maximum strength and visual appeal Compatible with the stock intake as well as any aftermarket intake system that retains the stock brace clearances Mounting hardware is re-used for Z4 applications Bolt-on installation

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Black - G20 M340i 330i...

T#:637424

Part#: BMSG20BSCB-BLK

Ships in 7 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

X-Brace Reinforcement with Hardware - E36

T#:341320

Part#: 51718410212KT

Ships in 3 Business Days

$ 774.36 USD

Add to Wish List

Qty

$ 774.36 USD

Add to Wish List

Original BMW chassis reinforcement developed for the special M3 LTW (Lightweight) model. This tubular-steel part connects the front subframe to the body and gives the car a more solid feel with less flex. Every convertible and Roadster model uses a similar design to address inherent chassis flex in the front of the car. Fits all E36 and Z3 chassis BMWs.

By adding this Genuine BMW Motorsport cross brace, you'll dramatically reduce that flex and movement in the front half of the body on your E36. This is a must-have on any BMW E36 that has an upgraded suspension, larger sway bars, is driven aggressively or sees ANY amount of track time. The Xbrace is a factory BMW Motorsport part, so design and fit are both great and the installation is straight forward and easy. Perhaps best of all is the low price compared to the impact the Motorsport X-brace has on the E36 chassis. If your car is a 1992-1996 model, be sure to select the option below so we include the proper hardware (nutserts) to use during installation (1997-1999 cars don't require them.)

The E36 Motorsport X Brace / Cross Brace fits:
1992-1995 E36 325i, 325is, 325ic
1996-1998 E36 328i, 328is, 328ic
1997-1999 E36 323is, 323ic
1992-1999 E36 318i, 318is, 318ic, 318ti
1995-1995 E36 M3 3.0 liter
1996-1999 E36 M3 3.2 liter
1996-2002 Z3 Roadster & Coupe (all)

Show More Show Less

Dinan Billet Front Strut Tower Brace Bars - BMW G22/23/26 4-Series ...

Call In Or Chat For Best Price!

T#:5567103

Part#: D180-0013

Ships in 9 Business Days

Sale - Save 10% $ 328.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 296.06 USD

Add to Wish List

Qty

Sale - Save 10%

$ 328.99

This product was last offered at the strikethrough price on
07-31-2026

$ 296.06 USD

Add to Wish List

The Dinan G2x Strut Tower Braces provide additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. Not only do the braces provide a performance benefit but they replace arguably the biggest eyesore in the factory engine compartment. Transforming the blight that is the factory smashed aluminum tubes into a notable highlight that augments the engine bay rather than detract from it. The attractive black anodized billet aluminum braces can be installed in a matter of minutes and used in conjunction with either the stock or Dinan intake systems with the brace valley (D760-0058 / D760-0059). Features: Improved chassis rigidity. Decreased flex during cornering. Solid black anodized billet aluminum for maximum strength and visual appeal. Compatible with stock and Dinan Intake Systems with brace valley (D760-0058 / D760-0059) Bolt-on installation.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Silver - G20 M340i 330...

T#:637423

Part#: BMSG20BSCB-SIL

Ships on Sep 1, 2026

$ 255.99 USD

Add to Wish List

Qty

$ 255.99 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Billet Strut Cross Braces For G30 G14 G15 G16

T#:27138580

Part#: BMSG30SB

Ships on Sep 1, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the G30, G14, G15, and G16 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Black - BMW G01 X3, G02 X4, ...

T#:39126853

Part#: BMSBILSCB-BLK

Ships on Sep 1, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - BMW G22/G23/G26 ...

T#:46924996

Part#: G22BSCB-RED

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Dinan Aluminum Strut Tower Braces - A90 MKV Supra

Call In Or Chat For Best Price!

T#:18866020

Part#: D180-0017

Ships in 5 Business Days

Sale - Save 10% $ 349.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 314.95 USD

Add to Wish List

Qty

Sale - Save 10%

$ 349.99

This product was last offered at the strikethrough price on
07-31-2026

$ 314.95 USD

Add to Wish List

The popular 'G' chassis 2/3/4 series strut braces have been modified to now support the A9x GR Supra! The Dinan A9x Strut Tower Braces provide additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. Not only do the braces inspire confidence but they enhance the factory engine compartment with a notable highlight augmenting its aesthetic appeal. The attractive black anodized billet aluminum braces can be installed in a matter of minutes and used in conjunction with either the stock or aftermarket intake systems that retain OEM clearances. Features: Improved chassis rigidity Decreased flex during cornering Solid black anodized billet aluminum for maximum strength and visual appeal Compatible with the stock intake as well as any aftermarket intake system that retains the stock brace clearances Includes matching black mounting hardware for GR Supra applications Bolt-on installation

Show More Show Less

RACEBRACE Strut Brace - 6 Cylinder E46 M3/3-Series

T#:50837389

Part#: RE.RBE46

Special Order: No Guaranteed ETA

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

Reinforces the strut towers against deformation while adding valuable triangulation to the front end for sharper, more predictable handling. Designed to prevent “mushrooming” and other distortion caused by rough roads or stiff suspension setups, these plates help maintain consistent suspension geometry by reducing unwanted chassis flex. The result? A more stable, confidence-inspiring front end under load. Strut tower plates are engineered to sit perfectly flush against the towers. If they don’t, it’s a sign the towers have experienced some deformation. In minor cases, this can often be corrected using a block of wood and a hammer to carefully restore the mounting surface.

Show More Show Less

Genuine BMW F80 M3, F82 M4 Structural Reinforcement Panel - 516480543...

T#:199236

Part#: 51648054327

Ships in 2 Business Days

4% off MSRP $ 689.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 659.99 USD

Add to Wish List

Qty

4% off MSRP

$ 689.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 659.99 USD

Add to Wish List

Genuine BMW Structural Reinforcement Panel -
This item fits the following BMW Chassis:
F80 M3,F82 M4,F83

Genuine BMW Strut Tower Mounting Ring - Right - BMW E9X M3, E82 1M, E...

T#:115822

Part#: 51618055092

Ships in 2 Business Days

2% off MSRP $ 209.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 204.99 USD

Add to Wish List

Qty

2% off MSRP

$ 209.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 204.99 USD

Add to Wish List

Connects the strut tower brace bar to the strut tower.

Genuine BMW Ring, Strut Tower Brace, Right
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93

Show More Show Less

Strut Brace - Priced Each

T#:597060

Part#: 51618077057

Ships in 8 Business Days

2% off MSRP $ 1,176.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,147.99 USD

Add to Wish List

Qty

2% off MSRP

$ 1,176.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,147.99 USD

Add to Wish List

Rally Road Strut Tower Bar - E36

T#:587652

Part#: B250

Ships on Sep 1, 2026

$ 481.99 USD

Add to Wish List

Qty

$ 481.99 USD

Add to Wish List

Rally Road has created a strut bar for the E36 based on the design of the original BMW LTW / Motorsport Strut Bar. Rally Road has improved on the original design in many aspects. The bar ends are machined from a single billet aluminum block. The finish is bright black anodize. This bar looks great and functions as well as the factory original. They even include a raised area on the bar ends so you can place your ///M decal like the original. *Just like the original Motorsport Bar, does not fit cars with factory ASC+T

Show More Show Less

Dinan Matte Carbon Fiber Strut Brace Kit - G8x M2, M3, M4

Call In Or Chat For Best Price!

T#:23284042

Part#: D180-0015-B

Ships in 3 Business Days

Sale - Save 10% $ 1,171.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,054.76 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,171.99

This product was last offered at the strikethrough price on
07-31-2026

$ 1,054.76 USD

Add to Wish List

The Dinan G8x Strut Tower Brace provides additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. The lightweight brace is designed with maximum function in mind and includes linking structural elements that completely change the OEM 2-piece strut bar set into one blended system that offers additional strengthening against flex. Not one to take a back seat to functionality, aesthetics are also elevated beyond simple steel bars into striking carbon fiber (matte or gloss) with accents that tie in effortlessly into the highly geometric and angular factory engine bay for an OEM+ feel. The imposing carbon fiber brace can be installed in a matter of minutes and used in conjunction with either the stock or Dinan intake systems. While the brace was designed to specifically tie into the latter for a harmoniously balanced and unified appearance the brace can also stand on its own and elicit nearly as equally an impressive visual. Features: Improved chassis rigidity Decreased flex during cornering Lightweight: 5.6 lbs lighter than stock (Dinan CF: 2.8 lbs vs OEM Steel: 8.4 lbs) 2x2 twill carbon fiber with inset aluminum mounting points for increased strength and improved visual appeal Multiple finish options: Available in Gloss or Matte Twill Carbon (Matte Twill shown) Designed to mesh seamlessly with the Dinan cold air intake creating an aesthetically unified engine bay Bolt-on installation using factory mounting hardware

Show More Show Less

Genuine BMW Front Strut Brace - Z4 sDrive35i sDrive35is sDrive28i ...

T#:115777

Part#: 51617190432

In Stock

Sale - Save 58% $ 123.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 52.27 USD

Add to Wish List

Qty

Sale - Save 58%

$ 123.99

This product was last offered at the strikethrough price on
05-02-2026

$ 52.27 USD

Add to Wish List

Genuine BMW Strut Brace -
This item fits the following BMW Chassis:
E89 Z4

Burger Motorsports Billet Strut Cross Braces - Blue - BMW G22/G23/G26...

T#:46924998

Part#: G22BSCB-BLU

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Black - BMW G22/G23/G2...

T#:46924999

Part#: G22BSCB-BLK

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Silver - BMW G22/G23/G...

T#:46924997

Part#: G22BSCB-SIL

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Red - BMW G01 X3, G02 X4, F9...

T#:39126852

Part#: BMSBILSCB-RED

Ships on Sep 1, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Silver - BMW G01 X3, G02 X4,...

T#:39126854

Part#: BMSBILSCB-SIL

Ships on Sep 1, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

BMS Billet Strut Cross Braces - G29 BMW Z4

T#:27138575

Part#: BMSZ4SB

Ships on Sep 1, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the 2019+ G29 BMW Z4 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. The perfect addition to your G29 BMW Z4 engine bay Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

Genuine BMW Front Strut Brace - BMW F95 X5M, F95 X6M

T#:31390563

Part#: 51618078061

Ships in 2 Business Days

2% off MSRP $ 424.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 414.99 USD

Add to Wish List

Qty

2% off MSRP

$ 424.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 414.99 USD

Add to Wish List

This cross brace supports and connects to the front strut towers and frame rails

Genuine BMW Strut Brace

T#:185845

Part#: 51710420759

Ships in 2 Business Days

2% off MSRP $ 1,085.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,064.99 USD

Add to Wish List

Qty

2% off MSRP

$ 1,085.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,064.99 USD

Add to Wish List

Genuine BMW Strut Brace

Genuine BMW Front strut brace - F80 F82 F83

T#:222044

Part#: 31127855855

Ships in 8 Business Days

$ 382.99 USD

Add to Wish List

Qty

$ 382.99 USD

Add to Wish List

Genuine BMW Strut Brace -

This item fits the following BMW Chassis:
F80,F82,F83,

Dinan Experience Package (E) - G2X M340i/M440i

Call In Or Chat For Best Price!

T#:45997489

Part#: G2XM340IM440IEKT

Back Ordered

Sale - Save 10% $ 3,752.99

This product was last offered at the strikethrough price on
07-31-2026

$ 3,377.48 USD

Add to Wish List

Qty

Sale - Save 10%

$ 3,752.99

This product was last offered at the strikethrough price on
07-31-2026

$ 3,377.48 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience.

Show More Show Less

A90 Supra Experience Package

Call In Or Chat For Best Price!

T#:30197980

Part#: A90-SUPRA-E-B

Ships on Sep 1, 2026

Sale - Save 10% $ 2,467.99

This product was last offered at the strikethrough price on
07-31-2026

$ 2,220.82 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,467.99

This product was last offered at the strikethrough price on
07-31-2026

$ 2,220.82 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go-to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders, the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience. Includes Dinan Exhaust Dinan Intake Dinan Turbo Inlet Strut Braces Throttle Booster Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +13 HP and +14 lb-ft of torque (Exhaust +Intake) Smoother, louder and sportier sound (Exhaust + Intake + Turbo Inlet) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonator between the catalyst and rear muffler for increased volume (Exhaust) 10 pounds lighter than the stock for an improved power-to-weight ratio (Exhaust) Reduced intake restriction for greater flow that allows increased turbo efficiency and greater power potential on modified builds (Intake + Turbo Inlet) Improved throttle response (Intake + Turbo Inlet) Increased chassis rigidity with decreased flex during cornering for improved handling and performance (Strut Braces) Customizable throttle mapping for enhances feel and acceleration (Throttle Booster) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge Includes Dinan Exhaust Dinan Intake Dinan Turbo Inlet Strut Braces Throttle Booster Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +13 HP and +14 lb-ft of torque (Exhaust +Intake) Smoother, louder and sportier sound (Exhaust + Intake + Turbo Inlet) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonator between the catalyst and rear muffler for increased volume (Exhaust) 10 pounds lighter than the stock for an improved power-to-weight ratio (Exhaust) Reduced intake restriction for greater flow that allows increased turbo efficiency and greater power potential on modified builds (Intake + Turbo Inlet) Improved throttle response (Intake + Turbo Inlet) Increased chassis rigidity with decreased flex during cornering for improved handling and performance (Strut Braces) Customizable throttle mapping for enhances feel and acceleration (Throttle Booster) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge

Show More Show Less

Project Cars

SELECT YOUR BMW

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results