This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
The ULTIMATE shifter upgrade for your BMW! Experience more precise throws, less shift lever travel, and an all-around transformation in your shifting experience.
For dozens of years, enthusiasts have critiqued the imprecise and vague feeling of BMW manual transmissions. Plagued with long throws, fore and aft play in gear, and a generally loose feeling, your OEM BMW shifter leaves much to be desired. While most standard carrier-mount short throw shifter kits will aid in reducing throw length and eliminating side-to-side play in gear, some enthusiasts long for a hardcore, race-inspired shifter that completely removes play and excessive throw length. At Turner Motorsport we share the same desire and set out to offer the ULTIMATE upgrade with this Performance Chassis Mount Short Shifter.
WHY UPGRADE?
Factory BMW shifter assemblies are complex by nature. The main component of this assembly is the shift carrier, a cast aluminum piece positioned inside the transmission tunnel that incorporates bushings at both ends for mounting. Like most factory parts, these bushings are designed to reduce NVH (noise, vibration, and harshness) transmission to the cabin. To the spirited driver, however, these bushings translate to flex and vagueness in the shift lever. Moreover, because this carrier is mounted to both the transmission and the body, the entire shifter assembly will "float" with the driveline, further increasing the vague and imprecise feeling of your shifter.
Our Performance Chassis Mount Short Shifter removes the shift carrier assembly entirely—removing any prospect of flex caused by bushings or driveline movement. By contrast, this chassis mount shifter offers a drastic reduction in shift lever travel, vagueness, and side-to-side play. An elevated base allows for moving the fulcrum point upwards, resulting in a much shorter and more precise throw. Shift times are further reduced by a tall, "rally style" shift lever, used to aid in leverage while also bringing the lever closer to the steering wheel. Our design incorporates a proprietary centering spring design, which is adjustable for increasing or decreasing self-centering force. In short, this design eliminates all the drawbacks of your factory BMW shifter, translating to more control, greater precision, shorter throws, and faster shift times.
FEATURES & BENEFITS
Reduced Throw: Modified shifter geometry and heightened fulcrum point translate to a shorter shift lever throw
Improved Shifter Feel: Eliminating the shift carrier and associated bushings drastically reduces "slop" and side-to-side play in the shift lever
Increased Precision: Mounting the shifter to the chassis allows for little to no variation in gear selection
Universal Fitment: Fits many BMW chassis with the provided base plate and hardware (see "Fits These Cars" for exact fitment information)
DESIGN
6061 aluminum, 4130 steel, and 316 stainless steel construction
A type-II black anodized finish
Adjustable self-centering spring
"Rally Style" shift lever
Spherical bearing pivot with maintenance-free brass insert
Product Development:
Our Chassis Mount Shifters are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-27-2026
Enhance the driving experience of your MINI F Chassis with the Quickshifter Short Shifter Kit. This kit is designed to improve gear shifts, providing a more precise and responsive feel. Crafted with high-quality materials, it offers durability and reliability, ensuring long-lasting performance. Whether you're on the street or the track, the Quickshifter Short Shifter Kit delivers smoother shifts and reduces shift throw distance for quicker gear changes.
Upgrade your MINI F Chassis with the Quickshifter Short Shifter Kit to enjoy improved gear shifting performance and a more engaging driving experience.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Complete your Getrag 420G six-speed manual swap with a comprehensive shifter solution engineered for precision and durability. This all-in-one kit features our double-adjustable short shifter, dual-shear selector rod, heavy-duty shifter arm, upgraded bushings, and all required installation hardware for crisp gear engagement, reduced shifter slop, and confidence-inspiring performance you'll feel with every shift!
TURNER MOTORSPORT DOUBLE ADJUSTABLE SHORT SHIFT KIT
BMWs have historically been plagued by very long throw shifters from the factory - luckily, we've developed the solution. Our short shifter system is height- and throw-adjustable, offering up to a 52% reduction in throw over stock. Double adjustability enables you to find the sweet spot that will make you excited to drive your car again. Installation of this kit is also of the easiest to tackle. Compared to the competition, a custom bearing cup allows for easy installation from inside the car (on applications that use the stock shifter arm).
Benefits:
Adjustable between a conservative short throw to ultra short throw Ultra crisp shifter feel - quicker, more precise shifts More engaging driving experience Adjustability:
Independently adjustable knob height 22mm adjustment range to fine-tune shifter throw and feel. Note: knob height also affects throw reduction to some degree Independently adjustable shifter throw Adjustable by raising and lowering the lower lever position relative to the pivot ball. Note: ball position also affects knob height by ~10mm range Combined total throw adjustment range 32 to 52 % reduction in throw over stock E36 shifter. A throw adjustment can be done in the car without removing the shifter DSSR (109MM) - E36 420G
Like all OEM selector rods, the factory part uses single-shear attachment, allowing for deflection within the shifter linkage. The result? Vague, imprecise gear selections that detract from your overall driving experience. The dual-shear selector rod (DSSR) design spreads the torsional force of gear selections across the selector rod joint, reducing deflection for increased precision. Our DSSR is precision-machined from durable 304 stainless steel to further reduce deflection and resist corrosion.
Features:
Provides a more positive feel in the shifter by reducing play in the linkage due to minimized deflection Manufactured from 304 stainless steel for superior corrosion resistance and durability Replacement for 25112228055 (European E36 M3 Evolution) HEAVY-DUTY SHIFTER ARM - E36 420G
To cater to the six-speed swap E36 community, we designed a direct replacement and upgrade for the unavailable, 420G-specific shifter arm. Precision-machined from 6061-T6 billet aluminum and clear anodized, this replacement carrier is durable, lightweight, and built to last. It is dimensionally identical to the OEM carrier, ensuring compatibility with the OEM shift carrier bushing, shift lever, and Turner Motorsport Double-Adjustable Short Throw Shifter Kit.
Features:
6061-T6 billet aluminum construction provides excellent durability and longevity Mil-spec clear anodized for superior corrosion resistance Dimensionally identical to its OEM counterpart, ensuring compatibility with all factory shifter components POLYURETHANE SHIFTER ARM BUSHING
This shifter bushing is designed to remove the shifter play caused by an old, failed rubber shifter bushing. Manufacturing the bushing from polyurethane instead of rubber reduces the amount of stretch caused by the moving part through the bushing. This maintains the direct crisp feel from your shifter assembly. When your OE shifter arm bushing begins to fail, you will notice slop in shifting, potentially making it easier to miss gears, and it often causes an obvious vibration and movement from the engine RPMs.
Features:
Corrosion-resistant 304 stainless steel mounting sleeve with bonded 70a polyurethane Stiffer bushing results in a crisper shifter feel and a more engaging driving experience. Ready to install out of the box - no modifications required Replaces Genuine BMW part numbers 25111222015 and 25111222652 Improved durability over OEM rubber Made in America Check out the "KIT CONTENTS" tab for a detailed list of everything included in this kit!
