Performance Increase: 14-20hp, 22-29ft-lb V-Box Acceleration: 60-130mph Reduced By 1.2 Seconds The Honda FK8 Type R intake is the result of extensive design iteration through dyno testing and flow analysis. It was developed to achieve two objectives – 1) Maintain low inlet temperatures. 2) De-restrict the turbo inlet path. The first objective was met by enclosing the filter inside a carbon airbox and using the stock seal against the hood to block out the heat soak from the engine. Since the intake sits directly behind the radiator it is crucial that the filter is not exposed which would result in a loss of power through high IAT. The second objective was met by removing the flexible tubing and optimizing the inlet path with a Venturi stack connected directly to the filter. Furthermore, we added a second inlet to the airbox with a scoop pulling in air from the inner wing area. This almost doubles the total cross-sectional area through which the turbo can draw from as compared with the single entry on the stock system. Our carbon airbox enclosure has been designed to maximize the use of the available volume and block all sources of heat. The resulting performance gains and aesthetics are industry-leading for the FK8 Type R. The Eventuri FK8 Type R intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Note: Some photos show optional engine cover and turbo inlet tube Each intake system consists of: Prepreg Carbon Fibre Airbox Enclosure Custom High Flow Air Filter ISO Tested Carbon Venturi stack with integrated MAF tube Secondary Inlet Scoop High-quality Silicon coupler with OEM specification hose clamps Laser Cut Bracket Work Includes updated V2 MAF ** This item is not eligible for return **
Show More Show Less
Autel MaxiSYS MS909CV is an advanced commercial vehicle diagnostic tablet compatible with over 80 light, medium and heavy duty vehicles. The 9.7-inch Android-based wireless touchscreen tablet performs extensive diagnostics, including the ability to read/erase codes, view/plot live data, and perform active tests. The tablet includes a Bluetooth enabled Vehicle Communication Interface (VCI)/J2534 pass-through device, MaxiBAS B200 battery/start/charge system test device, alligator clips, multimeter and amplifier clips. Equipped with ADAS calibration software for class 3-5 and class 6-8 vehicles, the tablet features a dynamic calibration system. Upgraded Octa-Core processor and 128GB storage and Android 10.0 Operating System with 9.7” Touchscreen and the whole-new MaxiFlash VCI to deliver smooth operation Intelligent Diagnostics with Module Topology on Select Vehicles and Enhanced AutoSCAN / VINScan and DTC Analysis / Repair Guided Assist ADAS Calibration with new Class 6-8 Dynamic Calibration, Supporting Class 3-5 Complete ADAS Coverage. The Class 6-8 Static Calibration (coming soon) Support heavy Duty Battery Test & Health Report
Show More Show Less
