BMW 3 Series G20 (2019+)

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)

Set of 4 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.

To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.

Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.

Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.

Key Features:

Cast aluminum construction offers superior strength and resilience over the OE plastic pan

Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating

Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance

Hard coat anodized finish provides exceptional corrosion resistance and longevity

Integrated magnets collect metallic debris, protecting transmission internals

Carbon Performance Intake and 3-Point Strut Brace Kit

We know the G20 and G42 BMW models deliver an incredible driving experience, whether equipped with the B48 or B58 engine. However, we’ve identified key areas where performance and style can be taken to the next level. That’s why we’ve developed the Turner Carbon Fiber Performance Kit, combining our Turner Carbon Fiber Intake System and Turner Carbon Fiber Strut Tower Brace into one ultimate package.

Turner Carbon Fiber Intake System

Upgrade your engine bay with our Turner Carbon Fiber Intake System, designed for maximum performance and style.

Unmatched Airflow: Our intake flows 8% more air than the factory system (445.0 CFM vs. 410.1 CFM), reducing stress on your turbo and delivering optimal performance.
Lower Intake Temps: The enclosed carbon fiber lid reduces intake temperatures by up to 13°F compared to open intakes, ensuring consistent performance.
Premium Materials: Built with a gloss carbon fiber intake tube featuring MAF scaling, a durable 6061-T6 anodized flange, and a wrinkle black powder-coated heat shield for strength and style.
High-Performance Filtration: Includes a conical, reusable air filter with 8-ply oiled cotton gauze and a velocity stack for superior filtration and efficiency.
This intake is the perfect blend of form and function, offering noticeable performance gains while giving your engine bay the high-end look it deserves.

Turner Carbon Fiber Strut Tower Brace

Inspired by the performance-focused "M" chassis, our Turner Carbon Fiber Strut Tower Brace is engineered to improve handling and chassis rigidity.

Enhanced Handling Dynamics: Reduces chassis flex by effectively distributing cornering loads between the strut towers, maintaining consistent wheel alignment geometry during aggressive driving.
Precision Engineering: CAD-designed for a seamless fit with factory mounting points, our strut brace is built with lightweight yet ultra-rigid carbon fiber featuring a 2x2 twill weave.
Durable Construction: Features billet aluminum mounts machined from 6061-T6 aluminum, type II anodized, and securely bonded to the carbon fiber for uncompromised strength and stability.
Striking Aesthetics: Our high-gloss carbon fiber design adds a motorsport-inspired look to your engine bay, complementing any BMW enthusiast's style.
Why Choose the Turner Performance Kit?

Performance Gains: Maximize airflow and structural rigidity to make your G20 or G42 sharper, more responsive, and more enjoyable to drive.
Premium Appearance: Transform your engine bay with matching carbon fiber components that deliver both performance and head-turning style.
Easy Installation: Both the intake and strut brace are designed for a straightforward, bolt-on installation using factory mounting points—no modifications required.
Whether you’re hitting the track or carving through back roads, the Turner Motorsport G20/G42 Carbon Fiber Performance Kit ensures your BMW delivers on all fronts: performance, handling, and aesthetics. Upgrade your 2 or 3 Series today with the Turner kit designed to bring your driving experience closer to the ultimate M-car level.

The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.

To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.

Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.

Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.

Key Features:

Cast aluminum construction offers superior strength and resilience over the OE plastic pan

Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating

Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance

Hard coat anodized finish provides exceptional corrosion resistance and longevity

Integrated magnets collect metallic debris, protecting transmission internals

Kit Includes:

Turner Motorsport ZF 8HP High-Capacity Aluminum Transmission Pan OE Hengst G8X Filter Installation Kit