BMW Exterior Trim, Body Parts, Aero and Styling for BMW 3 Series G20 (2019+)

When designing the spoiler for the M3, our engineering team sought to offer the most impressive performance-oriented trunk spoiler on the market. Utilizing CAD and laser-scanning technology, this spoiler is designed in-house to flow perfectly with the body lines not only on the trunk lid, but also paying close attention to the roof and the rear bumper. 

Inspired by the design of the high kick trunk found on the E46 M3 CSL, we wanted to replicate this performance aesthetic in a unique manner to perfectly compliment the aggressive factory body lines of the F82 M4. Crafted from high-quality hand laid carbon fiber to achieve it's world class appearance and durability, the Turner Motorsport High Kick will give your M4 aggressive styling to set your vehicle apart from the masses. 

Features:

• Installs with no drilling, cutting, or modification of any kind required
• Pre-installed high strength dual sided tape
• High quality hand laid carbon fiber
• World class appearance and unparalleled durability

BMW engineers positioned the oil cooler quite low under the car, positioned horizontally - an aerodynamic design that creates a vacuum force while driving, drawing heat from the oil cooler. The issue some of the vehicle owners have experienced is road debris from small branches to chunks of ice that have impacted the OE belly pan hard enough to crack the oil cooler draining the car's oil rapidly. Being one of the lowest points of the car, even a close encounter with a parking block can mean the end of the road for the factory belly pan - and oil cooler. Damage to the belly pan means reduced cooling, which can result in dangerously high engine temperatures. Once the belly pan is damaged, there is no longer any protection for the oil cooler, meaning damage to the cooler and a catastrophic loss in oil pressure may be right around the corner.

Designed using 8 gauge 5052 aluminum, this skid plate kit offers plenty of strength to protect your oil cooler and transmission. We also made sure this would be an easy, reversible upgrade by maintaining OE mounting locations and hardware that requires NO cutting or modification to your vehicle for fitment. Our engineering team also felt it was important to maintain some of the cooling features the BMW engineers spec'd out such as having a trim seal to fit snugly against the cooler edges to create the same vacuum cooling effects as stock.

Features:

No cutting, drilling, or modification required
1/8” 5052 Aluminum skid plate construction.
10 Ga 5052 Aluminum side pieces to save weight.
Maintains factory aero design, while offering improved ground clearance compared to OEM
​Integrated frame-mounted support bracket for maximum strength.
Maintains wheel liner mounting positions.
​Stainless mounting hardware included
Made in the U.S.A

Turner Motorsport G20 M340i Skid Plate

The BMW M340i's potent B58 engine, known for delivering incredible power, relies on a robust cooling system to handle the heat—especially with performance mods. One critical component, the low-mounted oil cooler, faces frequent hazards from road debris and parking obstacles, risking significant damage and costly oil loss if struck. A cracked belly pan can impair cooling efficiency, leading to dangerously high engine temperatures and exposing the oil cooler to potential impact.

This Turner Motorsport Skid Plate is crafted from 1/8" 5052 aluminum and engineered for strength and durability, safeguarding vital components without compromising BMW’s design. Featuring a convenient access door for oil changes, it’s an easy-to-install solution that retains OEM mounting points and aerodynamics while delivering unmatched protection.

Key Features:

Precision Fitment: No cutting, drilling, or modifications needed. Heavy-Duty 5052 Aluminum Construction: 1/8" main plate with lightweight 10-gauge aluminum side pieces. OEM Aero Compatibility: Preserves factory airflow design while improving ground clearance. Integrated Support Bracket: Reinforced frame-mounted support for extra durability. Convenient Maintenance: Access door for quick oil pan drain plug access. All Hardware Included: Includes stainless steel mounting hardware for corrosion resistance. Proudly Made in the USA: Designed with top-quality materials and craftsmanship.

Turner Motorsport Carbon Fiber Front Lip – G20 M Sport

Elevate your G20 M Sport’s aesthetic with the Turner Motorsport Carbon Fiber Front Lip—a stunning addition that adds sophistication and performance-driven design. Crafted from premium 2x2 twill carbon fiber, this lip is more than just eye candy; it seamlessly complements your car's factory lines while adding a bolder look with a touch of Turner Motorsport's signature styling. CAD-engineered for a precise fit, this front lip uses factory mounting locations, plus an extra adhesive layer for a secure, easy installation.

Features:

High-Quality 2x2 Twill Carbon Fiber: Strong, lightweight, and visually striking. UV-Protected Gloss Clear Coat: Ensures long-lasting shine and durability. Designed for OEM Precision: CAD-developed in-house for a flawless fit. Factory Mounting Points: No modifications needed—install with confidence! Don’t miss this limited-time opportunity to upgrade your G20 M340i/xDrive with unparalleled style and protection.

Turner Motorsport G20 330i/xDrive Skid Plate

BMW’s G20 330i/xDrive delivers thrilling performance, but the design leaves the oil cooler vulnerable to road debris. Positioned low and facing the road, the stock oil cooler is at risk from hazards like branches, ice, and even road scraps, which can puncture the factory plastic belly pan and cause sudden oil loss. Turner Motorsport’s Skid Plate provides robust protection to prevent costly damage and ensure your vehicle’s cooling system stays intact.

Crafted from 1/8” 5052 aluminum, this skid plate combines strength and minimal weight, offering one of the lightest metal options available. The design preserves the G20’s factory aerodynamics, ensuring optimal airflow around the oil cooler for effective heat dissipation. No modifications are required for installation, as the skid plate mounts securely using your BMW's original hardware.

Key Features:

Quick, Modification-Free Installation: No cutting, drilling, or extra hardware required. Durable 5052 Aluminum Construction: 1/8” main plate and 10-gauge aluminum side pieces for lightweight yet solid protection. Factory-Optimized Aero Design: Enhances ground clearance while maintaining BMW’s cooling efficiency. Built-In Frame Support Bracket: Reinforced structure for added stability. Preserves Wheel Liner Fitment: Designed to keep all original mounting points. All Hardware Included: Supplied with stainless steel mounting hardware. Proudly Made in the USA: Precision-engineered for quality you can trust.

Turner Motorsport G20 330i/xDrive M-Sport Carbon Fiber Front Lip

Take your G20’s style to the next level with Turner Motorsport’s exclusive M-Sport Carbon Fiber Front Lip—a sleek addition that balances aggression with elegance. Expertly CAD-designed for seamless fitment, this 2x2 twill carbon fiber lip blends perfectly with your factory body lines, adding a bold, sporty look without compromising BMW's original aesthetic. This high-quality carbon fiber piece installs easily using factory bumper mounting locations and includes an adhesive for extra stability.

Features:

Premium 2x2 Twill Carbon Fiber: Lightweight, high-strength material with show-stopping appeal. UV-Protected Gloss Finish: Maintains a long-lasting shine. Perfect OEM+ Fitment: CAD-designed in-house to match factory mounting points precisely. Simple Installation: Uses original mounting locations and 3M™ double-sided adhesive for added security.

Enhance the allure of your BMW G20 M340i/xDrive with the Turner Motorsport Carbon Fiber Diffuser – a result of meticulous engineering by Turner's experts dissatisfied with existing G20 M340 diffuser options. This direct bolt-on upgrade, designed in-house using advanced 3D laser scanning and CAD technology, redefines exterior styling. The diffuser boasts a deep profile, an aggressive fin design, and hand-laid 2x2 pre-preg carbon fiber, ensuring a head-turning experience. Elevate your BMW's presence and make a bold statement with Turner's exclusive Carbon Fiber Diffuser.

Key Features & Specifications:

• In-house design for precision fitment
• Mounts to existing bumper insert locations with OE hardware
• Crafted from lightweight, hand-laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber
• Autoclave cured for superior durability
• Clear coated for excellent finish durability and UV resistance
• Can be painted for a color-matched look with standard body shop prep work
• Rated to withstand 100°C (212°F) continuous use, and 120°C (248°F) intermittent use

As part of the Enthusiast Bundle, the Carbon High Kick Trunk Spoiler from Turner Motorsport offers an aggressive style upgrade for the rear end of your G20. The hand-laid gloss carbon fiber and a design that seamlessly aligns with the G20 body lines create a truly beautiful finish. Easy installation, with no drilling required – simply clean the trunk surface, remove the backing from the pre-attached high-strength double-sided tape, line it up, and press firmly down. For optimal adhesion, we recommend installing in a warm environment.

Design Features and Benefits:

• Aesthetic Upgrade
• Follows the deck lid and roof contours to accentuate OEM features
• In-house design for precision fitment
• Includes pre-applied adhesive tape