Any time you use a wheel spacer you MUST have a longer wheel bolt or wheel stud to properly fasten the wheel to the hub. We offer extended wheel spacer bolts in silver and black finish in a variety of lengths to fit many spacer sizes. We're up to date on the different thread sizing as well - 12x1.5, 14x1.25, and 14x1.5 so we can supply wheel bolts for just about any BMW or MINI.
Add the spacer thickness to your stock bolt length and that is your ideal extended bolt length. We generally sell bolts by spacer thickness but there may be exceptions. It's always best to measure from the wheel bolt you're currently using. When we list the total length of a bolt it's from the base of the mounting seat to the tip. To be considered safe, a 12x1.5 wheel bolt needs 10mm (6.5 turns) of thread engaged; a 14x1.25 or 14x1.5 bolt needs 12mm (9.0 and 7.5 turns) of engaged thread.
Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.
Our original bullet nose studs are available in 60mm, 75mm, 82mm, or 90mm. The 75mm works great for cars that do not use a spacer (or a spacer smaller than 10mm). We recommend the 90mm length for cars that have spacers up to 20mm. The 82mm length is a happy medium between the 75mm and the 90mm. These studs come with a OEM-style black zinc coating for excellent corrosion resistance. These studs are perfect for dual-purpose street/track cars. The studs are stronger and safer than wheel bolts with protection against corrosion which makes them suitable for street use. For a dedicated race or track car, where wheel changes or pit stops are more frequent, check out our racing dry lube studs.
Our studs are also designed and manufactured with the properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are manufactured to meet our own specifications. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality. Turner Bullet Nose Wheel Stud Features:
Black phosphorous corrosion resistant coating
Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
