BMW Performance Chips & Software for BMW 3 Series G20 (2019+)

BMS Pedal Tuner - N52, N54, N55

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

JB+ Quick Install Tuner - B58 - 3 Wire

T#:21012607

Part#: JBPLUS-B58-3W

In Stock

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

The popular and well-proven JB Plus quick install tuner is available for B46, B48, and B58 applications! Boost is user adjustable up to 4.5psi over stock providing gains up to 30 wheel horsepower and 40 wheel torque on the B48 motor and up to 40 wheel horsepower and 50 wheel torque on the B58 motor. Timing and fueling remains managed seamlessly by the DME, preserving all factory safety systems. While the JB4 is the ultimate tuning tool the JB Plus (JB+) is a quick and simple way to add a few HP with minimal cost and minimal install effort. Something that anyone can buy, install in under a minute, and really feel from the driver's seat. The fuel economy during normal driving is unchanged. Automatically detects the engine type upon installation allowing the same unit to be used for any B48 B58 F series application!

Show More Show Less

Burger Motorsport JB4 Performance Tuner - BMW B38/B46/B48

T#:40004848

Part#: JB4-B48

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your B38, B46, and B48 powered BMW. Power gains are up to 40hp to the wheels (55hp crank) for a B48, gains with bolt-on parts, higher octane, E85 mixtures, and larger turbos are even higher. The JB4 features a simple plug & play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in-dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization, but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or JB4 mobile phone adapter. The JB4 automatically detects between the B38, B46, B48 models at boot up making installation and setup a snap. Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. A separate JB4 Mobile app purchase is also required. JB4 Map Guide: Map0: Stock tuning, fully disable JB4 Map1: 3psi over stock added (91 octane) Map2: 4psi over stock added (91-93 octane) Map3: 6psi over stock added (93+ octane) Map4: Absolute target map with peak target of 20psi (93+ and/or 30% E85, EWG connector suggested) Map5: Absolute target map with peak target of 22psi (30% E85+ fuel, EWG connector suggested) Map6: Custom tuning map -- see details on JB4tech.com B58 JB4 page Map7: Progressive WMI map with tuning a function of meth flow and user-defined boost additive. Map8: VALET / Low Boost Map JB4 Power Gains, Features, & Benefits Power gains of up to 100hp to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times Preloaded with custom JB4 BMW tuning software and up to 8 maps for various fuel and modification levels Ethanol (E85) compatible tuning maps Able to read/delete fault codes View and record up to 40 different gauges/engine parameters in real time with the JB4 app. Boost by gear in 1st, 2nd, and 3rd can be controlled via the JB4 app for a perfect launch Exhaust flap operation can be controlled in most JB4 applications Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving 91 octane fuel or better required for performance gains Not VIN locked and can be removed without a trace and resold down the road Includes the rugged JB4 billet aluminum enclosure for protection Designed and assembled in the USA Free USA Shipping 5-year warranty Note for 2018+ G chassis vehicles with the digital dash layout we have not yet added in the JB4 commands to allow in-dash control but will provide those via a free firmware update once developed. Until then a JB4 mobile adapter or BMS data cable is required for any map and setting changes.

Show More Show Less

JB+ Quick Install Tuner - B48 - 3 Wire

T#:21012609

Part#: JBPLUS-B48-3W

In Stock

$ 238.99 USD

Add to Wish List

Qty

$ 238.99 USD

Add to Wish List

The popular and well-proven JB Plus quick install tuner is available for B46, B48, and B58 applications! Boost is user adjustable up to 4.5psi over stock providing gains up to 30 wheel horsepower and 40 wheel torque on the B48 motor and up to 40 wheel horsepower and 50 wheel torque on the B58 motor. Timing and fueling remains managed seamlessly by the DME, preserving all factory safety systems. While the JB4 is the ultimate tuning tool the JB Plus (JB+) is a quick and simple way to add a few HP with minimal cost and minimal install effort. Something that anyone can buy, install in under a minute, and really feel from the driver's seat. The fuel economy during normal driving is unchanged. Automatically detects the engine type upon installation allowing the same unit to be used for any B48 B58 F series application!

Show More Show Less

Burger Motorsports JB4 Performance Tuner - BMW Gen3 B48 2.0L & Gen3 B...

For models with the Gen3 engines only (B48N/B48P/B48TU2 & B58N/B58TU2)

For models with the Gen3 B58 (B58N / B58TU2) and Gen3 B48 (B48N / B48P / B48TU2) engines only

T#:29101683

Part#: B58GEN3-JB4

Ships on Aug 11, 2026

$ 699.00 USD

Add to Wish List

Qty

$ 699.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your B48/B58 GEN3 powered vehicle. Power gains are up to 100whp to the wheels (125hp crank) on a completely stock car on 93 octane, and even higher with ethanol fuel mixed in! This new JB4 BMW tuner is specifically designed for the latest Gen 3 B48/B58 variant and is capable of processing the new ultra-fast SENT digital sensor signals in real time with zero latency. The JB4 features a simple plug & play installation harness for easy installation & removal, and includes many features not found with any other tune. Including on-the-fly in-app map switching between factory and various performance maps, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, and much more. Other more expensive tuners may claim to equal the JB4's technology, but upon closer examination, lack most, if not all, of the JB4's features. Remember, the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new, fast, and smooth racing experience. The JB4 also does not require any user setup or customization, but for those who are interested in logging, adding new features as we post them, etc, we suggest the Bluetooth mobile phone adapter.

Show More Show Less

Burger Motorsport JB4 Performance Tuner - BMW B58 Gen2 3.0L (B58TU / ...

Not for sale or use in the state of California.

T#:40004847

Part#: JB4-B58-GEN2

Ships on Aug 11, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your B58 vehicle. Power gains are up to 60hp to the wheels (80hp crank) on a completely stock car on pump gas for a B58; gains with bolt on parts, higher octane, and larger turbos are even higher. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built in data logging, built in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. FEATURES AND BENEFITS Power gains of up to 50hp to the wheels on a stock vehicle Quick Plug & Play Installation CANbus integration offering unrivaled tuning features and performance Runs as smoothly as stock, this is how your BMW should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked, can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit, or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. Separate JB4 Mobile app purchase also required. Note for 2018+ G chassis vehicles with the digital dash layout, Burger Motorsports have not yet added in the JB4 commands to allow in-dash control but will provide those via a free firmware update once developed. Until then a JB4 mobile adapter or BMS data cable is required for any map and setting changes.

Show More Show Less

Burger Motorsport JB4 Performance Tuner - BMW B38/B46/B48 (CARB Appro...

T#:40004849

Part#: JB4-B48-CARB

EO#: D-744-4

Ships on Aug 11, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

CARB APPROVAL: Approved Under Executive Order (EO) No. D-744-4 for all 2016-2018 BMW 230i, 330i, 430i, 530i, and X1 applications. The JB4 is the most advanced and highly featured tuning system available for your B38, B46, and B48 powered BMW. Power gains are up to 40hp to the wheels (55hp crank) for a B48, gains with bolt-on parts, higher octane, E85 mixtures, and larger turbos are even higher. The JB4 features a simple plug & play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in-dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization, but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or JB4 mobile phone adapter. The JB4 automatically detects between the B38, B46, B48 models at boot up making installation and setup a snap. Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. A separate JB4 Mobile app purchase is also required. JB4 Map Guide: Map0: Stock tuning, fully disable JB4 Map1: 3psi over stock added (91 octane) Map2: 4psi over stock added (91-93 octane) Map3: 6psi over stock added (93+ octane) Map4: Absolute target map with peak target of 20psi (93+ and/or 30% E85, EWG connector suggested) Map5: Absolute target map with peak target of 22psi (30% E85+ fuel, EWG connector suggested) Map6: Custom tuning map -- see details on JB4tech.com B58 JB4 page Map7: Progressive WMI map with tuning a function of meth flow and user-defined boost additive. Map8: VALET / Low Boost Map JB4 Power Gains, Features, & Benefits Power gains of up to 100hp to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times Preloaded with custom JB4 BMW tuning software and up to 8 maps for various fuel and modification levels Ethanol (E85) compatible tuning maps Able to read/delete fault codes View and record up to 40 different gauges/engine parameters in real time with the JB4 app. Boost by gear in 1st, 2nd, and 3rd can be controlled via the JB4 app for a perfect launch Exhaust flap operation can be controlled in most JB4 applications Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving 91 octane fuel or better required for performance gains Not VIN locked and can be removed without a trace and resold down the road Includes the rugged JB4 billet aluminum enclosure for protection Designed and assembled in the USA Free USA Shipping 5-year warranty Note for 2018+ G chassis vehicles with the digital dash layout we have not yet added in the JB4 commands to allow in-dash control but will provide those via a free firmware update once developed. Until then a JB4 mobile adapter or BMS data cable is required for any map and setting changes.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Performance Chips & Software for BMW 3 Series G20 (2019+)

Sub-Categories

BMS Pedal Tuner - N52, N54, N55

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

JB+ Quick Install Tuner - B58 - 3 Wire

Burger Motorsport JB4 Performance Tuner - BMW B38/B46/B48

JB+ Quick Install Tuner - B48 - 3 Wire

Burger Motorsports JB4 Performance Tuner - BMW Gen3 B48 2.0L & Gen3 B...

Burger Motorsport JB4 Performance Tuner - BMW B58 Gen2 3.0L (B58TU / ...

Burger Motorsport JB4 Performance Tuner - BMW B38/B46/B48 (CARB Appro...

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results