BMW Wheels - Genuine & Performance for BMW 3 Series G20 (2019+)

Clear BMW chassis

Please ensure your correct model is selected

The wheels and stance often make the look of the car complete. If your factory alloys are missing center caps, curb-rashed beyond recognition, or have been damaged, we have your replacements all picked out. For a performance-oriented driver, aftermarket alloys shed weight and offer improved aesthetics over the factory options. Space out your stance with our selection of wheel spacers, completely change the look and feel of your BMW with forged or flow-formed aftermarket alloys, or replace old wheels with factory options.

Sub-Categories

Sort By:
19" APEX VS-5 Square Wheel Set - Choose Your Finish!
19" APEX VS-5 Square Wheel Set - Choose Your Finish!
APEX Wheels - Corporate Logo
T#:40545983
Part#: VS519928112
Ships in 5 Business Days
New Item
Starting at $ 2,036.00 USD
Add to Wish List
Starting at $ 2,036.00 USD
Add to Wish List
APEX VS-5 19x9" ET28 Square Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.
Show More Show Less
19" APEX ML-10RT Forged Wheels - Set Of Four
19" APEX ML-10RT Forged Wheels - Set Of Four
Pre-Order: ETA December 2024
APEX Wheels - Corporate Logo
T#:31788353
Part#: ML10199525112RKT
In Stock
$ 3,356.00 USD
Add to Wish List
$ 3,356.00 USD
Add to Wish List
APEX Solid Gloss Black BMW Center Caps - Priced Each
APEX Solid Gloss Black BMW Center Caps - Priced Each
APEX Wheels - Corporate Logo
T#:639899
Part#: HW-APX-CAP-BLK
In Stock
$ 9.99 USD
Free Shipping
Add to Wish List
$ 9.99 USD
Free Shipping
Add to Wish List
20" APEX VS-5RS Square Wheel Set - Pick Your Finish
20" APEX VS-5RS Square Wheel Set - Pick Your Finish
APEX Wheels - Corporate Logo
T#:19593934
Part#: VS5RS209ET25
Ships in 5 Business Days
Starting at $ 3,636.00 USD
Free Shipping
Add to Wish List
Starting at $ 3,636.00 USD
Free Shipping
Add to Wish List
Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Square Setup 20x9" ET25 APEX VS-5RS Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever
Show More Show Less
APEX ML-10RT 19" Forged Wheels - Set Of Four
APEX ML-10RT 19" Forged Wheels - Set Of Four
Pre-Order: ETA December 2024
APEX Wheels - Corporate Logo
T#:31788356
Part#: ML10199525112GKT
Ships in 5 Business Days
$ 3,276.00 USD
Free Shipping
Add to Wish List
$ 3,276.00 USD
Free Shipping
Add to Wish List
20" APEX VS5RS Square Wheel Set - Choose your finish!
20" APEX VS5RS Square Wheel Set - Choose your finish!
APEX Wheels - Corporate Logo
T#:19693165
Part#: VS5RS20925SQ
Ships in 5 Business Days
Starting at $ 3,636.00 USD
Free Shipping
Add to Wish List
Starting at $ 3,636.00 USD
Free Shipping
Add to Wish List
Forged wheels provide a weight reduction while having a stronger wheel for shaving down those lap times! 20x9 ET25 ​The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel? VS-5RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the wheel's structure to start off as strong as possible. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Square Setup 4 20x9" ET25 APEX VS-5RS Forged BMW Wheels in your choice of finishes On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever
Show More Show Less
19" APEX VS-5 Staggered Wheel Set - Choose Your Finish!
19" APEX VS-5 Staggered Wheel Set - Choose Your Finish! ...
APEX Wheels - Corporate Logo
T#:40545988
Part#: VS51991038
Ships in 5 Business Days
New Item
Starting at $ 2,076.00 USD
Add to Wish List
Starting at $ 2,076.00 USD
Add to Wish List
APEX VS-5 19x9" ET28 & 19x10" ET38 Staggered Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.
Show More Show Less
19" APEX SM-10 Square Wheel Set - Choose your finish!
19" APEX SM-10 Square Wheel Set - Choose your finish!
APEX Wheels - Corporate Logo
T#:19593940
Part#: SM1019928SQ
Ships in 5 Business Days
Starting at $ 1,936.00 USD
Free Shipping
Add to Wish List
Starting at $ 1,936.00 USD
Free Shipping
Add to Wish List
Shed weight and add style with APEX wheels! 19x9" ET28 ​ APEX wheels are stronger, lighter wheels than typical cast wheels thanks to their Flow-formed semi-forging process. These wheels are on average 10lbs lighter or more! This reduces unsprung weight, allow for the best performance possible. The spokes and barrel are designed to allow as much room as possible for brake systems, while retaining a classic motorsports theme that matches perfectly with the aggressive BMW style. Thanks to these qualities, these wheels will keep your looks and performing at your best with plenty of confidence!
Show More Show Less
19" APEX ML-10RT Forged Wheels - Set Of Four
19" APEX ML-10RT Forged Wheels - Set Of Four
Pre-Order: ETA December 2024
APEX Wheels - Corporate Logo
T#:31788352
Part#: ML10199525112AKT
Ships in 5 Business Days
$ 3,356.00 USD
Add to Wish List
$ 3,356.00 USD
Add to Wish List
Vargas Turbo Wheel Stud Conversion Kit - G2X, A90/A91 Supra
Vargas Turbo Wheel Stud Conversion Kit - G2X, A90/A91 Supra
Vargas Turbo Technologies - Corporate Logo
T#:641936
Part#: M14125-STUD
Ships in 4 Business Days
$ 145.99 USD
Free Shipping
Add to Wish List
$ 145.99 USD
Free Shipping
Add to Wish List
Wheel studs are among the safest and beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go. With studs you won't have to worry about dropping your expensive wheels onto the brake rotor. This kit includes: M14x1.25 to M14x1.50 CONVERSION Wheel studs in Gold Zinc (20) M14x.1..5 19mm Black opened ended lug nuts (20) *Note: Apply Medium duty lock-tite to the studs (short thread end) and torque to 25 ft/lb. Lug nuts should be torqued to OEM specifications. For your safety retorque all hardware (studs and nuts) after 25-50 Miles
Show More Show Less
VTT M14 Titanium Wheel Stud Kits
VTT M14 Titanium Wheel Stud Kits
Vargas Turbo Technologies - Corporate Logo
T#:7292018
Part#: TISTUD201425
Ships in 8 Business Days
Starting at $ 335.99 USD
Free Shipping
Add to Wish List
Starting at $ 335.99 USD
Free Shipping
Add to Wish List
VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M14x1.25x75mm on the small end to M14x1.5 on the long end. This will convert M14x1.25 cars into M14x1.5 pattern Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.
Show More Show Less
12mm Competition Wheel Spacer Kit - BMW G Chassis - With Lug Bolts
12mm Competition Wheel Spacer Kit - BMW G Chassis - With Lug Bolts ...
Macht Schnell - Corporate Logo
T#:30131295
Part#: 89.12.012
In Stock
$ 119.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 119.00 USD
Free Shipping on orders $49 and up
Add to Wish List

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Special Offers

Shipping