BMW Wheels - Genuine & Performance for BMW 3 Series G20 (2019+)

Clear BMW chassis

Please ensure your correct model is selected

The wheels and stance often make the look of the car complete. If your factory alloys are missing center caps, curb-rashed beyond recognition, or have been damaged, we have your replacements all picked out. For a performance-oriented driver, aftermarket alloys shed weight and offer improved aesthetics over the factory options. Space out your stance with our selection of wheel spacers, completely change the look and feel of your BMW with forged or flow-formed aftermarket alloys, or replace old wheels with factory options.

Sub-Categories

Sort By:
19" APEX VS-5 Square Wheel Set - Choose Your Finish!
19" APEX VS-5 Square Wheel Set - Choose Your Finish!
APEX Wheels - Corporate Logo
T#:40545983
Part#: VS519928112
Ships in 5 Business Days
New Item
Starting at $ 2,036.00 USD
Add to Wish List
Starting at $ 2,036.00 USD
Add to Wish List
APEX VS-5 19x9" ET28 Square Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.
Show More Show Less
APEX Solid Gloss Black BMW Center Caps - Priced Each
APEX Solid Gloss Black BMW Center Caps - Priced Each
APEX Wheels - Corporate Logo
T#:639899
Part#: HW-APX-CAP-BLK
In Stock
$ 9.99 USD
Free Shipping
Add to Wish List
$ 9.99 USD
Free Shipping
Add to Wish List
19" APEX ML-10RT Forged Wheels - Set Of Four
19" APEX ML-10RT Forged Wheels - Set Of Four
Pre-Order: ETA December 2024
APEX Wheels - Corporate Logo
T#:31788353
Part#: ML10199525112RKT
In Stock
$ 3,356.00 USD
Add to Wish List
$ 3,356.00 USD
Add to Wish List
19" APEX VS-5 Staggered Wheel Set - Choose Your Finish!
19" APEX VS-5 Staggered Wheel Set - Choose Your Finish! ...
APEX Wheels - Corporate Logo
T#:40545988
Part#: VS51991038
Ships in 5 Business Days
New Item
Starting at $ 2,076.00 USD
Add to Wish List
Starting at $ 2,076.00 USD
Add to Wish List
APEX VS-5 19x9" ET28 & 19x10" ET38 Staggered Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.
Show More Show Less
19" APEX SM-10 Square Wheel Set - Choose your finish!
19" APEX SM-10 Square Wheel Set - Choose your finish!
APEX Wheels - Corporate Logo
T#:19593940
Part#: SM1019928SQ
Ships in 5 Business Days
Starting at $ 1,936.00 USD
Free Shipping
Add to Wish List
Starting at $ 1,936.00 USD
Free Shipping
Add to Wish List
Shed weight and add style with APEX wheels! 19x9" ET28 ​ APEX wheels are stronger, lighter wheels than typical cast wheels thanks to their Flow-formed semi-forging process. These wheels are on average 10lbs lighter or more! This reduces unsprung weight, allow for the best performance possible. The spokes and barrel are designed to allow as much room as possible for brake systems, while retaining a classic motorsports theme that matches perfectly with the aggressive BMW style. Thanks to these qualities, these wheels will keep your looks and performing at your best with plenty of confidence!
Show More Show Less
APEX ML-10RT 19" Forged Wheels - Set Of Four
APEX ML-10RT 19" Forged Wheels - Set Of Four
Pre-Order: ETA December 2024
APEX Wheels - Corporate Logo
T#:31788356
Part#: ML10199525112GKT
Ships in 5 Business Days
$ 3,276.00 USD
Free Shipping
Add to Wish List
$ 3,276.00 USD
Free Shipping
Add to Wish List
20" APEX VS5RS Square Wheel Set - Choose your finish!
20" APEX VS5RS Square Wheel Set - Choose your finish!
APEX Wheels - Corporate Logo
T#:19693165
Part#: VS5RS20925SQ
Ships in 5 Business Days
Starting at $ 3,636.00 USD
Free Shipping
Add to Wish List
Starting at $ 3,636.00 USD
Free Shipping
Add to Wish List
Forged wheels provide a weight reduction while having a stronger wheel for shaving down those lap times! 20x9 ET25 ​The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel? VS-5RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the wheel's structure to start off as strong as possible. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Square Setup 4 20x9" ET25 APEX VS-5RS Forged BMW Wheels in your choice of finishes On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever
Show More Show Less
19" APEX ML-10RT Forged Wheels - Set Of Four
19" APEX ML-10RT Forged Wheels - Set Of Four
Pre-Order: ETA December 2024
APEX Wheels - Corporate Logo
T#:31788352
Part#: ML10199525112AKT
Ships in 5 Business Days
$ 3,356.00 USD
Add to Wish List
$ 3,356.00 USD
Add to Wish List
20" APEX VS-5RS Square Wheel Set - Pick Your Finish
20" APEX VS-5RS Square Wheel Set - Pick Your Finish
APEX Wheels - Corporate Logo
T#:19593934
Part#: VS5RS209ET25
Ships in 5 Business Days
Starting at $ 3,636.00 USD
Free Shipping
Add to Wish List
Starting at $ 3,636.00 USD
Free Shipping
Add to Wish List
Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Square Setup 20x9" ET25 APEX VS-5RS Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever
Show More Show Less
MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F80 F82 F87
MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F8...
MSI Racing - Corporate Logo
T#:340355
Part#: MSI-M14X125
Ships on Jul 23, 2025
Sale - Save 5% $ 25.99
Starting at $ 24.80 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 5% $ 25.99
Starting at $ 24.80 USD
Free Shipping on orders $49 and up
Add to Wish List

 

  • 70MM, 80MM, OR 90MM OVERALL LENGTH
  • OUR HIGHEST-GRADE PREMIUM WHEEL STUD
  • DRY LUBE WITH BLACK M-PHOSPHATE COATING
  • STUD FOR RACE/TRACK USE
  • CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
  • USE WITH 14x1.5 NUT
  • For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.

    These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

    We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.
     

    FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:

  • Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
  • Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
  • Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
  • Heat-treated aircraft quality alloy steel
  • Developed from over 20 years of top level NASCAR use
  • These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).

    Sold per stud.
    Wheel nuts sold separately.
Show More Show Less
APEX Wheels Metal Valve Stem - Silver - BMW & MINI
APEX Wheels Metal Valve Stem - Silver - BMW & MINI
APEX Wheels - Corporate Logo
T#:593646
Part#: HW-OEM-VALVE-SV
Ships in 2 Business Days
$ 16.00 USD
Free Shipping
Add to Wish List
$ 16.00 USD
Free Shipping
Add to Wish List
APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap
Show More Show Less
APR Valve Stem Caps - Set Of 4 - Silver
APR Valve Stem Caps - Set Of 4 - Silver
APR - Corporate Logo
T#:31125602
Part#: MS100178
In Stock
$ 14.99 USD
Free Shipping
Add to Wish List
$ 14.99 USD
Free Shipping
Add to Wish List

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

  • Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
  • Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
  • Easy Installation: Simple to install and compatible with most standard valve stems.
  • Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
  • Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.

Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Special Offers

Shipping