BMW Electrical Sensors, Switches, & Relays for BMW 3 Series G20 (2019+)

Genuine BMW 5 Prong Salmon Relay - Multiple BMWs

T#:5390

Part#: 12631742690

In Stock

9% off MSRP $ 24.65

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 22.37 USD

Add to Wish List

Qty

9% off MSRP

$ 24.65

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 22.37 USD

Add to Wish List

This relay is used for the SMG system on the E46 M3 and various applications including secondary air systems on other BMW's. If you find that your SMG-equipped E46 M3 is not starting, this is one of the first places to check as it controls power to the hydraulic unit (the car will not start without hydraulics). Buy one to fix the issue and buy a second so you're not stranded in the future!

Show More Show Less

Motiv ReFlex+ for BMW

T#:17970629

Part#: RFXF02UI6

In Stock

$ 859.00 USD

Add to Wish List

Qty

$ 859.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

T#:28537533

Part#: 101-0216

In Stock

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

For Vehicles With Motiv ReFlex Unit Currently Installed Only

T#:22723690

Part#: 101-0212

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

T#:29201081

Part#: 900.1008

In Stock

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less

Motiv ReFlex+ Control Unit

T#:29101684

Part#: 900.1001

In Stock

$ 729.00 USD

Add to Wish List

Qty

$ 729.00 USD

Add to Wish List

The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.

Show More Show Less

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

T#:29234298

Part#: 910.1011

In Stock

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

Genuine BMW Optical Fiber Cable

T#:137569

Part#: 61120142318

Ships in 1-2 days

7% off MSRP $ 44.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD

Add to Wish List

Qty

7% off MSRP

$ 44.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD

Add to Wish List

Genuine BMW Optical Waveguide - L=7000Mm Fiber Optic Cable
This item fits the following BMW Chassis:
E60 M5,E63 M6,E70 X5M,E71 X6M,E85 Z4M,E63,E65,E70 X5,E71 X6,E85 Z4,E86 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F25 X3,F26 X4,F30,F31

Show More Show Less

Genuine BMW Engine Oil Temperature Sensor

T#:14972

Part#: 13627580635

Ships in 1-2 days

9% off MSRP $ 66.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Qty

9% off MSRP

$ 66.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Genuine BMW Temperature Sensor Water/Oil -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83,I01 i3,I12 i8

Fits BMW Engines including:
N55,S55

Show More Show Less

Genuine BMW Engine Oil Pressure Sensor - G01 F22 F23 F32 F33 F48 G30 ...

T#:539288

Part#: 12618647488

Ships in 1-2 days

9% off MSRP $ 66.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Qty

9% off MSRP

$ 66.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 60.99 USD

Add to Wish List

Genuine BMW Socket repair kit

T#:207094

Part#: 61132359996

Ships in 1-2 days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Genuine BMW Rep. Kit For Socket Housing - 4 Pol.
This item fits the following BMW Chassis:
E46 M3,E46,E85 Z4,E90,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Genuine BMW 3 Pin Socket Housing Repair Kit - Multiple BMWs

T#:215615

Part#: 61132359997

Ships in 1-2 days

4% off MSRP $ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD

Add to Wish List

Qty

4% off MSRP

$ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD

Add to Wish List

This is Genuine BMW 3 pin electrical socket repair kit.

ReFlex+ Install Harness - Flying Lead

T#:29201083

Part#: 900.1016

In Stock

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal

Show More Show Less

Genuine BMW Oil Level Sensor Kit - BMW B58C/B58D B46D/B48D (TU Engine...

T#:29334056

Part#: 12615A740A2KT

In Stock

$ 279.99 USD

Add to Wish List

Qty

$ 279.99 USD

Add to Wish List

This kit includes a new Genuine BMW Oil Level Sensor and three hex nuts to mount the new sensor to the oil pan. If the mounting stud bolts are also damaged, you will need 3 of BMW part number 07129904544. BMW has eliminated the dipstick in favor of electric oil level sensors located in the bottom of the oil pan. These sensors are designed to monitor both the oil level and oil condition, alerting you when the oil level is too low or the quality of the oil has dropped and should be changed. Unfortunately, like many BMW electrical components, these sensors are prone to failure and can result in improper level and quality readings. If you recently changed your oil and know the readings are incorrect, there is a good chance your sensor has failed. We recommend replacing your oil level sensor, in this case, to ensure you are always seeing proper levels and oil condition. Luckily, this sensor is easy to replace and could save you from potentially catastrophic issues later on.

Show More Show Less

Motiv ReFlex+

T#:29101668

Part#: 910.1001

Ships in 4 Business Days

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

ReFlex+ Plug-N-Play Harness Kit - Tensility Motorsport

T#:29201085

Part#: 200.1058

Ships in 4 Business Days

$ 794.00 USD

Add to Wish List

Qty

$ 794.00 USD

Add to Wish List

Tensility Motorsports has developed a plug and play kit for the ReFlex+ that was engineered to meet our high quality standards. TMS has been approved by MOTIV to manufacturer harnesses and they will not void your warranty on MOTIV ReFlex+ products.Â With attention to detail in the selection of wiring, production standards, and quality assurance, TMS plug and play harnesses ensure a consistent and reliable installation for a hassle-free experience. Each harness kit includes all the necessary components to install and run a ReFlex+ Advanced I/O Controller on the vehicle it was designed for. The harness is divided into a few separate pieces for ease of installation and a very clean finished look. Main Harness: This section of the TMS harness kit includes plug and play connections to the vehicles Cam, Crank, and TMAP sensors, 6 injector runs for port injection, the ethanol content sensor connector, and DTM connections for all of the auxiliary inputs and outputs. CAN+ Power Splitter: A clean over-molded compact harness that provides a plug and play connection to your vehicles Body Domain Controller. This section is where the kit will get power, ground, and connect to the CANbus network. Auxiliary Cable Pack: Four additional cables are included to simplify future expansions such as additional sensors, methanol, NOS, fuel pump relays, etc. These 8 ft. cables plug directly into the unused ReFlex+ harness auxiliary ports Aux Out 1/2/3 and Aux In 4 (PSI).

Show More Show Less

ReFlex Lite Injector Harness - Inline-6

T#:29234311

Part#: 900.1013

Ships in 4 Business Days

$ 155.00 USD

Add to Wish List

Qty

$ 155.00 USD

Add to Wish List

Required when installing a Motiv ReFlex Lite to your inline-6 powered BMW! Includes x6 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

ReFlex Lite Injector Harness - Inline-4

T#:29234303

Part#: 900.1012

Ships in 4 Business Days

$ 140.00 USD

Add to Wish List

Qty

$ 140.00 USD

Add to Wish List

Required when installing a Motiv ReFlex Lite to your inline-4 powered BMW! Includes x4 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

RELUCTOR

T#:527127

Part#: 11148605104

Ships in 1-2 days

5% off MSRP $ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD

Add to Wish List

Qty

5% off MSRP

$ 59.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 56.99 USD

Add to Wish List

Genuine BMW Outdoor Temperature Sensor/Probe - Multiple BMWs ...

T#:375994

Part#: 65816936953

Ships in 1-2 days

6% off MSRP $ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD

Add to Wish List

Qty

6% off MSRP

$ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD

Add to Wish List

Common fix for incorrect OBC temperature readings

Genuine BMW Bushing Contact w/ Wire Lead - Multiple BMWs

T#:10437

Part#: 61130005199

In Stock

13% off MSRP $ 7.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6.99 USD

Add to Wish List

Qty

13% off MSRP

$ 7.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6.99 USD

Add to Wish List

Used in a variety of locations throughout your BMW, this perfect for repair damage electrical connection contacts.

ReFlex+ Install Kit

T#:29267513

Part#: 400.1001

In Stock

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

Genuine BMW MQS Bushing Contact w/ Wire Lead - Multiple BMWs ...

T#:139551

Part#: 61130005197

In Stock

$ 3.68 USD

Add to Wish List

Qty

$ 3.68 USD

Add to Wish List

Perfect for repairing damaged wiring in multiple locations of your BMW.

Crankshaft Pulse Sensor

5X Entries Into Our F80 M3 Sweepstakes

T#:55030835

Part#: 3148100018

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Keep your ultimate driving machine running the way it was engineered to with this reliable replacement.

Oil Level Sensor

T#:39261793

Part#: 12615A740A3

In Stock

$ 243.99

This product was last offered at the strikethrough price on
09-24-2026

$ 198.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 243.99

This product was last offered at the strikethrough price on
09-24-2026

$ 198.99 USD

Limited Qty Sale

Add to Wish List

EV Charging Extension Cord - 30-foot NEMA 14-50

T#:22987081

Part#: CHRG-EXT

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

The EVANNEX 30-foot charging cable extension integrates seamlessly with NEMA 14-50 connectors found in various home or mobile chargers.

Compatible with BMW or MINI electric vehicles, this extension cord extends the charging range to reach power sources up to 50 feet away.

Integration with most NEMA 14-50 chargers
Ability to connect to distant power sources
Ergo Grip Handle for secure handling
Built-in LED indicator for easy power activation confirmation
Enhanced charging accessibility for on-the-go use
Ideal for connecting to unconventional power outlets like RV hookups, dryers, or air conditioner plugs

Show More Show Less

Genuine BMW Camshaft Position Sensor Connector Repair Kit

T#:58052445

Part#: 12527507526KT2

In Stock

$ 25.18 USD

Add to Wish List

Qty

$ 25.18 USD

Add to Wish List

Repair Kit For Socket

T#:528834

Part#: 61132359992

In Stock

7% off MSRP $ 13.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 12.99 USD

Limited Qty Sale

Add to Wish List

Qty

7% off MSRP

$ 13.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 12.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Socket Housing, Uncloded 12 Pol. - 61138373632

T#:208202

Part#: 61138373632

In Stock

11% off MSRP $ 18.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.99 USD

Limited Qty Sale

Add to Wish List

Qty

11% off MSRP

$ 18.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Socket Housing, Uncloded - 12 Pol.

Genuine BMW Terminal Socket - Mcon 2.8 - Multiple BMWs

T#:40627

Part#: 12527567482

In Stock

Sale - Save 50% $ 1.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 0.99 USD

Add to Wish List

Qty

Sale - Save 50%

$ 1.99

This product was last offered at the strikethrough price on
05-02-2026

$ 0.99 USD

Add to Wish List

Used in a wide variety of BMW connectors, these terminal sockets can come in handy when working on your wiring components.

Cloth Webbed Adhesive Tape - 7.5 Meters

T#:42873702

Part#: 61135B70D27

Ships on Apr 16, 2027

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

BUSHING CONTACT

T#:543048

Part#: 61139232674

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

A socket contact in the context of BMW refers to an electrical connector component utilized in BMW vehicles. These socket contacts are specifically engineered to establish electrical connections within the car's wiring and electronic systems. They play a vital role in ensuring the proper functioning of various electrical components, spanning from the vehicle's engine to its interior features. BMW socket contacts are meticulously designed to align with the brand's stringent criteria for quality and dependability, underscoring their significance in upholding the electrical systems and overall performance of the vehicle.

Show More Show Less

Genuine BMW Oil Level Sensor - BMW B58C/B58D B46D/B48D (TU Engines) ...

T#:29334016

Part#: 12615A740A2

In Stock

8% off MSRP $ 298.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 273.99 USD

Add to Wish List

Qty

8% off MSRP

$ 298.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 273.99 USD

Add to Wish List

BMW has eliminated the dipstick in favor of electric oil level sensors located in the bottom of the oil pan. These sensors are designed to monitor both the oil level and oil condition, alerting you when the oil level is too low or the quality of the oil has dropped and should be changed. Unfortunately, like many BMW electrical components, these sensors are prone to failure and can result in improper level and quality readings. If you recently changed your oil and know the readings are incorrect, there is a good chance your sensor has failed. We recommend replacing your oil level sensor, in this case, to ensure you are always seeing proper levels and oil condition. Luckily, this sensor is easy to replace and could save you from potentially catastrophic issues later on.

Show More Show Less

ReFlex+ Plug-N-Play Harness Kit - Visconti Tuning

T#:29201087

Part#: 200.1103

Ships in 4 Business Days

$ 615.00 USD

Add to Wish List

Qty

$ 615.00 USD

Add to Wish List

Visconti Tuning teamed up with MOTIV as the first company to bring a plug-and-play harness to the community. After years of success and some of the fastest Supras and BMWs in the world using the harness, Visconti Tuning has improved upon an already fantastic offering.

Show More Show Less

Genuine BMW Oil Level Sensor Kit - BMW B58C/B58D B46D/B48D (TU Engine...

T#:29334055

Part#: 12615A740A3KT

Ships in 1-2 days

$ 333.99 USD

Add to Wish List

Qty

$ 333.99 USD

Add to Wish List

This kit includes a new Genuine BMW Oil Level Sensor and three hex nuts to mount the new sensor to the oil pan. If the mounting stud bolts are also damaged, you will need 3 of BMW part number 07129904544. BMW has eliminated the dipstick in favor of electric oil level sensors located in the bottom of the oil pan. These sensors are designed to monitor both the oil level and oil condition, alerting you when the oil level is too low or the quality of the oil has dropped and should be changed. Unfortunately, like many BMW electrical components, these sensors are prone to failure and can result in improper level and quality readings. If you recently changed your oil and know the readings are incorrect, there is a good chance your sensor has failed. We recommend replacing your oil level sensor, in this case, to ensure you are always seeing proper levels and oil condition. Luckily, this sensor is easy to replace and could save you from potentially catastrophic issues later on.

Show More Show Less

Genuine BMW 10 Pole Socket Housing - Multiple BMWs

T#:540927

Part#: 61139277742

Ships in 1-2 days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Fixing a faulty connection in your BMWs electrical system? This 10 pole socket housing is a Genuine BMW replacement.

Genuine BMW Oil Level Sensor - BMW B58C/B58D B46D/B48D (TU Engines), ...

T#:29334012

Part#: 12615A740A3

Ships in 1-2 days

8% off MSRP $ 358.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 328.99 USD

Add to Wish List

Qty

8% off MSRP

$ 358.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 328.99 USD

Add to Wish List

BMW has eliminated the dipstick in favor of electric oil level sensors located in the bottom of the oil pan. These sensors are designed to monitor both the oil level and oil condition, alerting you when the oil level is too low or the quality of the oil has dropped and should be changed. Unfortunately, like many BMW electrical components, these sensors are prone to failure and can result in improper level and quality readings. If you recently changed your oil and know the readings are incorrect, there is a good chance your sensor has failed. We recommend replacing your oil level sensor, in this case, to ensure you are always seeing proper levels and oil condition. Luckily, this sensor is easy to replace and could save you from potentially catastrophic issues later on.

Show More Show Less

Genuine BMW Universal Socket Housing

T#:21280

Part#: 61138352304

In Stock

6% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Qty

6% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Genuine BMW Universal Socket Housing, Uncoded - 3 Pol.
This item fits the following BMW Chassis:
E36 M3,E34 M5,E39 M5,E60 M5,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E53 48IS,E34,E36,E38,E39,E46,E53 X5,E65,E70 X5,E71 X6,E82,E83 X3,E89 Z4,E90,F01,F02,F06,F10,F12,F13

Show More Show Less

Electrical Machine Electronics (EME) - BMW G01 G05 G11/12 G20/21 G30/...

T#:50818962

Part#: 12365B32B85

Ships in 3 Business Days

3% off MSRP $ 4,478.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,366.99 USD

Add to Wish List

Qty

3% off MSRP

$ 4,478.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,366.99 USD

Add to Wish List

Replace your malfunctioning EME with a Genuine Control unit

Genuine BMW Electrical Connector Repair Kit - Multiple BMWs ...

T#:206288

Part#: 61132359999

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

This is a Genuine BMW 2 pin connector that is used in many places by BMW.

Genuine BMW Basic Cotrol Unit DME 8CT0-NOX

T#:49543753

Part#: 12145B32771

Ships in 3 Business Days

3% off MSRP $ 2,409.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,333.99 USD

Add to Wish List

Qty

3% off MSRP

$ 2,409.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,333.99 USD

Add to Wish List

Replaces faulty or broken cotrol unit

Genuine BMW Voice Recognition SES Adapter Plug - Multiple BMWs ...

T#:11467

Part#: 84110018038

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

Ground Cable - B48/S58

For vehicles with prod date up to 06/2025

T#:50311456

Part#: 12425B586B0

Ships in 3 Business Days

3% off MSRP $ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD

Add to Wish List

Qty

3% off MSRP

$ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD

Add to Wish List

Your vehicle’s ground strap plays a vital role in maintaining a healthy electrical system. Exposure to heat, corrosion, and constant vibration can degrade the strap over time, resulting in weak or inconsistent electrical connections. When the ground strap begins to fail, symptoms can include hard starting, flickering or dim lights, warning messages, erratic sensor behavior, or complete no-start situations. Replacing a worn ground strap restores proper current flow, protects sensitive electronics, and keeps your engine and electrical systems operating reliably.

Show More Show Less

Wire Pinning Kit - MLK 1.2 Female Jack

T#:55281746

Part#: 125275WRKT

Ships in 6 Business Days

$ 37.40 USD

Add to Wish List

Qty

$ 37.40 USD

Add to Wish List

This Genuine BMW wiring repair kit is the ideal solution to refresh worn-out terminal connections in your Ultimate Driving Machine.

Knock Sensor

5X Entries Into Our F80 M3 Sweepstakes

T#:55353615

Part#: 12141716055

Ships on Nov 16, 2026

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

This Meyle replacement knock sensor is the perfect solution for keeping your high-performance engine safe and running at its absolute peak.

ReFlex Lite: Advanced Sequential Injector Controller - Inline-4 ...

T#:29234292

Part#: 910.1010

Back Ordered

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-4 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less