Turner Motorsport offers a variety of Performance Intake options for your BMW, including Genuine BMW, aFe Eventuri, Dinan, Gruppe M, Agency Power, and ECS Tuning.
Features & Specifications: Dyno-Proven Gains up to +11 HP & +12 Lbs. x Ft. TQ Outflows Factory Intake by 6% Measured Flow: 155 CFM @ 7” H20 Washable and Reusable Pro 5R Air Filter for Maximum Performance Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Five Layer Performance Air Filter: This 7-1/2” tall 360-degree radial flow air filter features a 4” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and track use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. BMW Strut Brace: The Momentum intake is designed to fit with the factory strut brace, with no modification necessary. Dyno-Tuned Intake Tube: This system features a high-quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Aluminum Heat-Shield Panel: A durable aluminum heat-shield panel is designed to keep the hot engine air away from the intake housing. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent-pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less
Eliminate your restrictive stock intake with this performance intake system from aFe Power! This intake is designed to provide significantly higher airflow to your engine and turbos, allowing for greater power potential. Dyno-Proven Gains up to +9 HP & +10 Lbs. x Ft. TQ Outflows Factory Intake by 10% Measured Flow: 325 CFM @ 7” H20 Washable and Reusable Pro DRY S Air Filter for Maximum Convenience Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Three Layer Performance Air Filter: This 6” tall 360-degree radial flow air filter features a 4-1/2” round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Aluminum Heat-Shield Panel: A durable aluminum heat-shield panel is designed to keep the hot engine air away from the intake housing. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation. Fitment Note: This item will not fit vehicles that comply with BMW RDE (Real Driving Emissions) statutes. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. AutoTecknic's Dry Carbon Cooling Plate provides the G20 330I/xDrive with better air induction while providing the intake and engine with cooler air during high-speed driving. It also gives your engine bay a fresh appearance. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.
Show More Show Less
Features & Specifications: Dyno-Proven Gains up to +11 HP & +11 Lbs. x Ft. TQ Outflows Factory Intake by 3% Measured Flow: 150 CFM @ 7” H20 Washable and Reusable Pro DRY S Air Filter for Maximum Convenience Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Three Layer Performance Air Filter: This 7-1/2” tall 360-degree radial flow air filter features a 4” round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. BMW Strut Brace: The Momentum intake is designed to fit with the factory strut brace, with no modification necessary. Dyno-Tuned Intake Tube: This system features a high-quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Aluminum Heat-Shield Panel: A durable aluminum heat-shield panel is designed to keep the hot engine air away from the intake housing. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent-pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less
Eliminate your restrictive stock intake with this performance intake system from aFe Power! This intake is designed to provide significantly higher airflow to your engine and turbos, allowing for greater power potential. Dyno-Proven Gains up to +13 HP & +14 Lbs. x Ft. TQ Outflows Factory Intake by 15% Measured Flow: 340 CFM @ 7” H20 Washable and Reusable Pro 5R Air Filter for Maximum Performance Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Five Layer Performance Air Filter: This 6” tall 360-degree radial flow air filter features a 4-1/2” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and track use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Aluminum Heat-Shield Panel: A durable aluminum heat-shield panel is designed to keep the hot engine air away from the intake housing. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation. Fitment Note: This item will not fit vehicles that comply with BMW RDE (Real Driving Emissions) statutes. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Show More Show Less
The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system.
Show More Show Less
The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system.
Show More Show Less
