Turner Motorsport offers a variety of Performance Intake options for your BMW, including Genuine BMW, aFe Eventuri, Dinan, Gruppe M, Agency Power, and ECS Tuning.
The Injen SP1140 Cold Air Intake is the next logical step in your search for power gains for your 2020-2022 BMW G20 3-Series equipped with the L6-3.0L Turbo B58 and the L6-3.0L Turbo Hybrid engine. This easy-to-install performance cold air intake system allows that hungry Turbo engine to breathe deeper and unleash that additional performance that you’ve been craving. The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance Cold Air Intake system to develop some serious bolt-on power. The soul of this Cold Air Intake system is with our smooth, mandrel-bent, oversized 4.00” O.D. T6-6061 aluminum tube provides a smooth, uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Not only that, but this performance intake system put down an additional 19hp and 18 lb-ft of torque on the chassis dyno! That’s performance that you can feel and hear! KEY FEATURES Dyno Proven Gains of up to 19 hp and 18 lb-ft. of torque Aggressive engine tone under full throttle Provides power gains while maintaining A/F ratios Work with stock tune. No additional tuning required Manufactured from massive 4.00" O.D. 6061-T6 Mandrel-Bent Aluminum Tubing Hand-TIG welded for precious and beautiful welds Smooth intake piping eliminates restrictions and improves airflow Includes custom heat shield specifically designed for this application Aggressive under hood appearance while maintaining an OE fit Fully serviceable Injen SuperNano-Web dry air filter Made in Pomona California, USA headquarters Injen Technology Limited Lifetime Warranty
Show More Show Less
The Injen SP1140 Cold Air Intake is the next logical step in your search for power gains for your 2020-2022 BMW G20 3-Series equipped with the L6-3.0L Turbo B58 and the L6-3.0L Turbo Hybrid engine. This easy-to-install performance cold air intake system allows that hungry Turbo engine to breathe deeper and unleash that additional performance that you’ve been craving. The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance Cold Air Intake system to develop some serious bolt-on power. The soul of this Cold Air Intake system is with our smooth, mandrel-bent, oversized 4.00” O.D. T6-6061 aluminum tube provides a smooth, uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Not only that, but this performance intake system put down an additional 19hp and 18 lb-ft of torque on the chassis dyno! That’s performance that you can feel and hear! KEY FEATURES Dyno Proven Gains of up to 19 hp and 18 lb-ft. of torque Aggressive engine tone under full throttle Provides power gains while maintaining A/F ratios Work with stock tune. No additional tuning required Manufactured from massive 4.00" O.D. 6061-T6 Mandrel-Bent Aluminum Tubing Hand-TIG welded for precious and beautiful welds Smooth intake piping eliminates restrictions and improves airflow Includes custom heat shield specifically designed for this application Aggressive under hood appearance while maintaining an OE fit Fully serviceable Injen SuperNano-Web dry air filter Made in Pomona California, USA headquarters Injen Technology Limited Lifetime Warranty
Show More Show Less
The Eventuri G20 B48 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:
Show More Show Less
The BMW G20 B48 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the G20, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development we noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore our sealed airbox also has a heat shield with gold reflective to minimise the radiative heat transfer from the exhaust manifold. In order to maximise volume we made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally we use a custom made high-flow dry filter which is ISO tested for filtration performance and has a larger filtration area than the stock filter.
Show More Show Less
The Injen SP1140 Cold Air Intake is the next logical step in your search for power gains for your 2020-2022 BMW G20 3-Series equipped with the L6-3.0L Turbo B58 and the L6-3.0L Turbo Hybrid engine. This easy-to-install performance cold air intake system allows that hungry Turbo engine to breathe deeper and unleash that additional performance that you’ve been craving. The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance Cold Air Intake system to develop some serious bolt-on power. The soul of this Cold Air Intake system is with our smooth, mandrel-bent, oversized 4.00” O.D. T6-6061 aluminum tube provides a smooth, uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Not only that, but this performance intake system put down an additional 19hp and 18 lb-ft of torque on the chassis dyno! That’s performance that you can feel and hear! KEY FEATURES Dyno Proven Gains of up to 19 hp and 18 lb-ft. of torque Aggressive engine tone under full throttle Provides power gains while maintaining A/F ratios Work with stock tune. No additional tuning required Manufactured from massive 4.00" O.D. 6061-T6 Mandrel-Bent Aluminum Tubing Hand-TIG welded for precious and beautiful welds Smooth intake piping eliminates restrictions and improves airflow Includes custom heat shield specifically designed for this application Aggressive under hood appearance while maintaining an OE fit Fully serviceable Injen SuperNano-Web dry air filter Made in Pomona California, USA headquarters Injen Technology Limited Lifetime Warranty
Show More Show Less
