BMW Performance Intake Kits for BMW 3 Series G20 (2019+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport offers a variety of Performance Intake options for your BMW, including Genuine BMW, aFe Eventuri, Dinan, Gruppe M, Agency Power, and ECS Tuning.
Sort By:
Eventuri BMW G20 M340I Carbon Intake
Eventuri BMW G20 M340I Carbon Intake
For Vehicles Produced Post November 2018
Eventuri - Corporate Logo
T#:2929025
Part#: G20B58-V2-INT
Ships in 2 Business Days
$ 1,495.00 USD
Add to Wish List
$ 1,495.00 USD
Add to Wish List
The BMW G20 B58 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the G20, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development, the folks at Eventuri noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore, the sealed airbox also has a heat shield with gold reflective to minimise the radiative heat transfer from the exhaust manifold. In order to maximize volume, they made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally, they use a custom-made high-flow dry filter that is ISO tested for filtration performance and has a larger filtration area than the stock filter.
Show More Show Less
VTT Carbon Fiber Airbox Lid & Filter Kit - G20, G29, A90 B58
VTT Carbon Fiber Airbox Lid & Filter Kit - G20, G29, A90 B58 ...
Vargas Turbo Technologies - Corporate Logo
T#:29334009
Part#: VTT-G2X-CF-LID-1
Ships in 8 Business Days
$ 444.99 USD
Free Shipping
Add to Wish List
$ 444.99 USD
Free Shipping
Add to Wish List

Enhance your engine bay's aesthetics with the sleek carbon fiber airbox lid from Vargas Turbo Technologies!

VTT rigorously tested the stock air intake on a dynamometer and found limited areas for enhancement. Drawing inspiration from BMW's design, VTT crafted a carbon fiber lid for the factory airbox.

Constructed entirely from 100% carbon fiber, this lid features an eight-layer design with a 1.3mm thick UV-resistant shell, ensuring long-lasting durability.

The included high-performance air filter, made from a high-flow cotton weave, comes pre-oiled to trap contaminants while maintaining optimal airflow.

Key Features:

50-state emissions compliant Simple, straightforward installation Stunning carbon fiber appearance Reusable high-performance air filter Easily reversible upgrade Transform your B58-equipped BMW with the Carbon Fiber Airbox Lid & Filter Kit from Vargas Turbo Technologies today!

Show More Show Less
G20/G21/G22/G23 VTT BMW Performance Intake System
G20/G21/G22/G23 VTT BMW Performance Intake System
Vargas Turbo Technologies - Corporate Logo
T#:3062311
Part#: VTT-G2X-INT-1
Ships in 10 Business Days
$ 388.99 USD
Free Shipping
Add to Wish List
$ 388.99 USD
Free Shipping
Add to Wish List
Upgrade durability, flow and performance with a performance intake system. VTT is proud to announce its Modular Silicone/Billet intake system for the BMW G2X Platform with the B58TU engine. We invested many hours of testing and fitting this kit to get the best fitment, and highest quality. We are very happy with the results. Full disclosure, the factory intake system as far as the airbox is very good, but the intake tract down to the turbo, is full of twists turns, bellows, etc which can cause flow disruption. It also has a silencer which is a restriction as it bypasses air to quiet the intake sound. By removing all of these, and replacing them with our 3'-3.5' Silicone intake tube either to our 6' cone filter or the stock airbox you are removing all of those, and providing a free-flowing optimized air path from the filter or airbox to the turbo. From our testing we found up to 700WHP, the stock airbox is up to the task if stock appearance and sound is what you wish. Once you go over 700WHP, we suggest stepping up to the 6' cone with a built-in velocity stack.
Show More Show Less
Eventuri BMW G20 M340I Carbon Intake
Eventuri BMW G20 M340I Carbon Intake
For Vehicles Produced PRE November 2018
Eventuri - Corporate Logo
T#:2929024
Part#: G20B58-V1-INT
Ships in 5 Business Days
$ 1,495.00 USD
Add to Wish List
$ 1,495.00 USD
Add to Wish List
The BMW G20 B58 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the G20, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development, the folks at Eventuri noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore, the sealed airbox also has a heat shield with gold reflective to minimise the radiative heat transfer from the exhaust manifold. In order to maximize volume, they made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally, they use a custom-made high-flow dry filter that is ISO tested for filtration performance and has a larger filtration area than the stock filter.
Show More Show Less
Eventuri Carbon Fiber Intake - G20 B48
Eventuri Carbon Fiber Intake - G20 B48
For Vehicles Produced Post November 2018
Eventuri - Corporate Logo
T#:5663667
Part#: EVE-G20B48-V2-IN
Ships in 5 Business Days
$ 1,495.00 USD
Add to Wish List
$ 1,495.00 USD
Add to Wish List
The Eventuri G20 B48 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:
Show More Show Less
Eventuri Carbon Fiber Intake - G20 B48
Eventuri Carbon Fiber Intake - G20 B48
For Vehicles Produced PRE November 2018
Eventuri - Corporate Logo
T#:5663666
Part#: EVE-G20B48-V1-IN
Ships in 5 Business Days
$ 1,495.00 USD
Add to Wish List
$ 1,495.00 USD
Add to Wish List
The BMW G20 B48 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the G20, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development we noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore our sealed airbox also has a heat shield with gold reflective to minimise the radiative heat transfer from the exhaust manifold. In order to maximise volume we made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally we use a custom made high-flow dry filter which is ISO tested for filtration performance and has a larger filtration area than the stock filter.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

  • Performance Air Intake Kits

Brand

Price

$
$

Shipping