BMW Gauge Kits and Data Acquisition for BMW 3 Series G20 (2019+)

Clear BMW chassis

Please ensure your correct model is selected

Information is one of the most important tools in making your car faster, handle and brake better, and just be more reliable. Supplemental gauges have long been an easy and effective method of gathering and monitoring data on how the engine is performing, cooling system performance, engine tuning, oil pressure and temp, chassis dynamics, and just about anything else you can think of. Race teams employ teams of data engineers that study and articulate changes in the never ending quest of going faster.

Data acquisition and interpretation does not have to be a black art, however. We offer products that collect and present vital information in an easy to understand display. Think of these as smartphones for your car - sophisticated, touch-button operation, easy installation, and immensely valuable.
Sort By:

P3 Gauges - Corporate Logo
T#:590055
Part#: P3OSPLIT
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
Turn your single OBD2 port into Two Can allow multiple devices to access ECU at the same time* Very thin, flat harness allows for easy routing and flexibility *Not all OBD2 devices can work simultaneously. P3 Gauges can be put into analog mode or low priority mode to work with other devices in some cases
Show More Show Less
Dragy - Corporate Logo
T#:557433
Part#: DRAGY-GPS
Ships on Aug 8, 2025
31% off MSRP $ 229.00
$ 159.00 USD
Free Shipping on orders $49 and up
31% off MSRP $ 229.00
$ 159.00 USD
Free Shipping on orders $49 and up
NOW OFFERED AS THE DRAGY DRG70! UBLOX 10TH GEN HIGH PERFORMANCE GPS MODULE (DRG69 THE PREVIOUS MODEL WAS 8TH GEN) EXTREMELY LOW POWER CONSUMPTION UP TO AN INCREDIBLE 25 HOURS! BETTER ACCURACY AND POSITIONING VS PREVIOUS GENERATION UBLOX MODEL CONCURRENT RECEPTION OF UP TO FOUR GNSS SYSTEMS (GPS, GLONASS, GALILEO AND BEIDOU). Using high speed GPS satellites to measure your vehicles performance within 1/100th of a second, Dragy's GPS Performance Meter can produce identical results to the much more expensive VBOX system in an easy to use package. Dragy's software automatically charts slope on all timeslips which can then be posted to forums, social media, or Dragy's own leader board! Coming in a compact size of 1"x3", this box can be placed on the dash when testing and stored away when not in use. Additionally, more advanced features such as superimposing performance data over your mobile camera, virtual races with friends, internal feed for photos and performance discussion, and more are soon to come. Runs are saved in both metric and SAE formats. This allows for comparisons of 100-200kmh time, trap speeds and/or elapsed times, time to brake performance (such as 100-0, and much more! This system is managed using the free-to-download Dragy app, for both iOS and Android. All this can be done while simultaneously running JB4 mobile or other bluetooth apps. Features: Track your 0-60mph, 60-130mph, and 100-200kmh times Monitor your 1/4 and 1/2 mile times Record your race with realtime speedometer/performance reports overlay (requires use of your smartphone camera) Measure acceleration (0-100kmh, 100-200kmh, 1/4 mile and more) Measuring braking time (100-0kmh, 200-0kmh and much more) G-force measurement Dragy is for use only on the track - not for use on public roadways. Box contents: Dragy Performance Box Lap and Accelerometer USB charging cable 2x metal plates and 3M adhesive strip Manual Technical data: iOS (8.0) or Android (4.4) device required Metric unit system (km / h) supported Connection type: Bluetooth 4.0 Supports GPS and GLONASS Battery life: up to 10 hours Dimensions: 30 x 80 x 15mm
Show More Show Less
P3 Analog To V3 Upgrade Kit - BMW
Not available for all makes/models. Please contact customer service to determine vehicle eligibility.
P3 Gauges - Corporate Logo
T#:594368
Part#: P3V3UPGRADE
In Stock at Vendor
Sale - Save 10% $ 225.00
$ 202.50 USD
Free Shipping
Sale - Save 10% $ 225.00
$ 202.50 USD
Free Shipping
This kit will allow you to upgrade your Analog P3 gauge to the improved V3 ODB2 platform. Doing this will allow you to harness even more user control and monitoring over critical engine parameters. This simple modification includes a wiring harness swap and the addition of the OBD2 control box, leaving your existing P3 display untouched.
Show More Show Less

P3 Gauges - Corporate Logo
T#:594257
Part#: P3ESVA
In Stock
$ 85.00 USD
Free Shipping
$ 85.00 USD
Free Shipping
Allows 0-5 Volt Linear Output Gauges To Read Output From GM/Continental Ethanol Sensor

P3 Gauges - Corporate Logo
T#:6924292
Part#: 3P3BG2X
In Stock
Starting at $ 389.00 USD
Free Shipping on orders $49 and up
Starting at $ 389.00 USD
Free Shipping on orders $49 and up
Gone are the days of large, bulky gauge pods or needing to plug in a laptop. While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure unit settings of individual measurements, calibrate your vehicle speed, and read AFR in Lambda. P3 has torture-tested these gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. P3 V3 Gauge Features Plug and Play Install - plugs directly into your OBD2 port OEM Integration - installs in your vent for a sleek install while retaining airflow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor) Coolant temperature Air/Fuel ratio (can be read in AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light Analog input 1 (brown wire) can allow the gauge to read any 0-5 volt linear output sensor Analog input 2 (blue wire) can allow the gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph)
Show More Show Less
P3 Gauges - Corporate Logo
T#:2750688
Part#: P3LC2WB
In Stock
$ 229.00 USD
Free Shipping
$ 229.00 USD
Free Shipping

Upgrade your BMW's performance monitoring capabilities with the Innovate Motorsports LC-2 wideband kit, offering precise AFR readings right on your Multi-Gauge. Keep track of your engine's air/fuel ratio without cluttering your interior. The LC-2 employs advanced DirectDigital™ signal processing technology to accurately measure engine performance under various loads, compensating for changes in temperature, altitude, and sensor condition.

Key Benefits:

  • Direct integration with P3 Multi-Gauge using analog input
  • Patented DirectDigital™ Wideband Technology ensures accuracy
  • Compatible with all fuel types for versatile application
  • Self-calibrating circuitry maintains accuracy over time
  • Integrated dual-color LED for easy monitoring
  • Two fully programmable analog outputs for enhanced flexibility
  • Real-time display data on screen or via LogWorks software

Enhance your BMW's performance monitoring capabilities with the Innovate Motorsports LC-2 wideband kit, offering precision and versatility in one package.

Show More Show Less

P3 Gauges - Corporate Logo
T#:6924271
Part#: AP3BG2X
Ships in 2 Business Days
Starting at $ 289.00 USD
Free Shipping on orders $49 and up
Starting at $ 289.00 USD
Free Shipping on orders $49 and up
More than just a simple boost gauge, the P3 Analog incorporates an intelligent design that fits in perfectly with your BMWs interior. This is the perfect solution for anyone looking to extend the visibility of the factory engine monitoring display without the need for obtrusive gauges or a mounted tablet. The analog boost display is coupled with two analog inputs and a battery voltage display giving you the most vital information at your fingertips with the press of a button. All this in an attractive package that appears as if it was installed in the factory. Further bolstering an already stellar set of features is the upgradeability of this system. A simple wiring harness change and control box will transform your P3 Analog into full V3 OBD2 trim with all of the features and control options included. This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs. 4 Available Readouts: Analog boost (yellow/purple/black - a dedicated plug for analog boost sensor) *boost tap not included Analog input 1 (brown wire - can read any 0-5 volt linear output sensor) Analog input 2 (blue wire - can read any 0-5 volt linear output sensor) Battery voltage (red wire / black wire - read through power and ground wires) Analog gauge base kit includes Integrated display Analog Box control unit Main harness Hard-wire harness Analog boost sensor *boost tap not included Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end 3 zip ties 2 Scotchlok wire taps
Show More Show Less
P3 Gauges - Corporate Logo
T#:594383
Part#: P3BTAP2
Ships in 4 Business Days
$ 60.00 USD
Free Shipping
$ 60.00 USD
Free Shipping
Includes 5' of 5/32" boost tubing.

P3 Gauges - Corporate Logo
T#:10095926
Part#: P3ESEN
In Stock
$ 100.00 USD
Free Shipping
$ 100.00 USD
Free Shipping

The P3 Gauge Ethanol Content Sensor with Harness (P3ESEN) provides a seamless way to access ethanol readouts on your P3 Gauge. This sensor offers a convenient solution to monitor ethanol content, ensuring you have real-time information about your fuel mixture to enhance your vehicle's performance.

Show More Show Less

P3 Gauges - Corporate Logo
T#:42470377
Part#: LAP3VG2XP
Ships in 4 Business Days
New Item
Starting at $ 289.00 USD
Free Shipping on orders $49 and up
Starting at $ 289.00 USD
Free Shipping on orders $49 and up
More than just a simple boost gauge, the P3 Analog incorporates an intelligent design that fits in perfectly with your BMWs interior. This is the perfect solution for anyone looking to extend the visibility of the factory engine monitoring display without the need for obtrusive gauges or a mounted tablet. The analog boost display is coupled with two analog inputs and a battery voltage display giving you the most vital information at your fingertips with the press of a button. All this in an attractive package that appears as if it was installed in the factory.
Show More Show Less