Eventuri Filter Cleaning Kit

T#:396394

Part#: EVE-FLC

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

This filter cleaning kit powers away dirt and contaminants leaving your filter in like-new condition.

Autotecknic Dry Carbon Fiber Cooling Shroud - G20 330I/xDrive ...

T#:5189200

Part#: ATK-BM-0004-G20

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. AutoTecknic's Dry Carbon Cooling Plate provides the G20 330I/xDrive with better air induction while providing the intake and engine with cooler air during high-speed driving. It also gives your engine bay a fresh appearance. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

Eventuri Replacement Air Filter Element for Carbon Intake Kit - E46 M...

T#:640792

Part#: EVE-661-G2-FTR

Ships in 3 Business Days

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

Replacement filter for the Eventuri E46 M3 Carbon intake system, comes ready to install.

Eventuri BMW G20 M340I Carbon Intake

For Vehicles Produced Post November 2018

T#:2929025

Part#: G20B58-V2-INT

Ships in 2 Business Days

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

The BMW G20 B58 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the G20, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development, the folks at Eventuri noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore, the sealed airbox also has a heat shield with gold reflective to minimise the radiative heat transfer from the exhaust manifold. In order to maximize volume, they made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally, they use a custom-made high-flow dry filter that is ISO tested for filtration performance and has a larger filtration area than the stock filter.

Show More Show Less

FTP Motorsport Intake Pipe - G20 G29 G30 G32 G11 G01 G02 B48/B46 ...

T#:586883

Part#: SG71440

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume

Show More Show Less

FTP Turbo Intake Pipe - G20 M340 A90 Supra B58 3.0L

T#:588013

Part#: SG71449

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This runs from the intake box to the turbo inlet. This intake pipe from FTP Motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Charge Pipe - Red - G20 G29 G05 G11 & A90 Supra B58TU ...

T#:840347

Part#: SG71444-R

Special Order: No Guaranteed ETA

$ 275.99 USD

Add to Wish List

Qty

$ 275.99 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement - Replaces BMW p/n 13718651066 Larger than stock diameter for increased charge-air volume

Show More Show Less

FTP Motorsport Charge Pipe - Black - G20 G29 G05 G11 & A90 Supra B58T...

T#:586884

Part#: SG71444

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

Eventuri Carbon Fiber Intake - G20 B48

For Vehicles Produced PRE November 2018

T#:5663666

Part#: EVE-G20B48-V1-IN

Ships in 5 Business Days

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

The BMW G20 B48 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the G20, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development we noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore our sealed airbox also has a heat shield with gold reflective to minimise the radiative heat transfer from the exhaust manifold. In order to maximise volume we made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally we use a custom made high-flow dry filter which is ISO tested for filtration performance and has a larger filtration area than the stock filter.

Show More Show Less

Eventuri BMW G20 M340I Carbon Intake

For Vehicles Produced PRE November 2018

T#:2929024

Part#: G20B58-V1-INT

Ships in 5 Business Days

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

The BMW G20 B58 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the G20, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development, the folks at Eventuri noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore, the sealed airbox also has a heat shield with gold reflective to minimise the radiative heat transfer from the exhaust manifold. In order to maximize volume, they made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally, they use a custom-made high-flow dry filter that is ISO tested for filtration performance and has a larger filtration area than the stock filter.

Show More Show Less

Eventuri Carbon Fiber Intake - G20 B48

For Vehicles Produced Post November 2018

T#:5663667

Part#: EVE-G20B48-V2-IN

Ships in 5 Business Days

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

The Eventuri G20 B48 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:

Show More Show Less

Fuel-It! Billet Port Injection Manifold - BMW Gen 2 B58 (B58D / B58TU...

T#:47096350

Part#: FIG2B58BPIM

Ships on Oct 27, 2026

Starting at $ 2,299.00 USD

Add to Wish List

Starting at $ 2,299.00 USD

Add to Wish List

This 2000hp-capable port injection intake manifold with integrated high-density intercooler core will take your Gen2 B58 build to the next level! When it comes to intake manifolds, it doesn't get any better than this. The Fuel-It! intake manifold replaces your weak factory plastic B58 manifold with a direct-fit, high-flow, high-strength billet aluminum manifold. Features a huge intercooler core capable of supporting up to 2000hp, port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern, and 1/8" expansion ports perfect for direct port nitrous, water/methanol, or anything else you can imagine! Includes high-quality o-rings and all required hardware. Available with required port injection hardware (calibrated injectors with plug-and-play fuel line), or à la carte without the extra fueling hardware. The optional high-quality Bosch EV14 42mm fuel injectors are offered in 550cc, 750cc, and 950cc options.

Show More Show Less

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

T#:369781

Part#: 30-3000

In Stock

11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Qty

11% off MSRP

$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing

Show More Show Less

AEM V3 Water/Methanol Injector Kit (Qty 2)

T#:20815166

Part#: 30-3313

In Stock

12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

Qty

12% off MSRP

$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.

Show More Show Less

Hobb

T#:403482

Part#: ACC-HOBBS

Ships on Oct 27, 2026

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

T#:590418

Part#: 30-3304

In Stock at Vendor

11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Qty

11% off MSRP

$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

Enhances performance and efficiency for BMW and MINI vehicles
Maximizes power output while ensuring engine safety
Internal MAP sensor for precise control
35PSI maximum pressure capacity for reliability
Improves horsepower, torque, and fuel economy

Show More Show Less

AEM Water/Methanol Injection System

T#:20815164

Part#: 30-3326

In Stock at Vendor

11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

Qty

11% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 3 Series G20 (2019+)

Sub-Categories

Eventuri Filter Cleaning Kit

Autotecknic Dry Carbon Fiber Cooling Shroud - G20 330I/xDrive ...

Eventuri Replacement Air Filter Element for Carbon Intake Kit - E46 M...

Eventuri BMW G20 M340I Carbon Intake

FTP Motorsport Intake Pipe - G20 G29 G30 G32 G11 G01 G02 B48/B46 ...

FTP Turbo Intake Pipe - G20 M340 A90 Supra B58 3.0L

FTP Motorsport Charge Pipe - Red - G20 G29 G05 G11 & A90 Supra B58TU ...

FTP Motorsport Charge Pipe - Black - G20 G29 G05 G11 & A90 Supra B58T...

Eventuri Carbon Fiber Intake - G20 B48

Eventuri BMW G20 M340I Carbon Intake

Eventuri Carbon Fiber Intake - G20 B48

Fuel-It! Billet Port Injection Manifold - BMW Gen 2 B58 (B58D / B58TU...

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

AEM V3 Water/Methanol Injector Kit (Qty 2)

Hobb

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

AEM Water/Methanol Injection System

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results