Home
Cooling

BMW Cooling System Parts & Accessories for BMW 3 Series G20 (2019+)

Clear BMW chassis

The cooling system is arguably the weakest point in numerous BMWs. If you drive an aging BMW or plan on taking your car to the track like we do, we recommend beefing up your cooling system before going to the track. Generally, the main components in your cooling system that are prone to failure include the following: expansion tank, factory hoses, water pump, thermostat, fan (especially if your vehicle comes factory with a clutch fan), and radiator. Factory BMW expansion tanks are plastic and prone to either breaking off at connection points or combusting. As factory rubber hoses age they either crack or break over time - we offer silicone cooling hose upgrades for most applications to avoid future failures. If you have an older vehicle, your water pump likely comes from the factory with a plastic impeller - we offer upgraded water pumps with metal impellers that are far more reliable. Newer model BMWs utilize electric water pumps - BMW spent millions of dollars engineering these water pumps, but they fail so often that we recommend replacing at 60,000 mile service intervals to avoid being stranded on the side of the road. In terms of thermostats, we offer various upgraded thermostats for racing applications. If your BMW utilizes a clutch fan from the factory, we have several options available in terms of universal electric fans - we recommend replacing these to avoid sending brittle plastic fan blades through your hood. For radiators, we recommend swapping out your radiator for one that does not use plastic connection points like your factory radiator.

Sub-Categories

Sort By:

Race German Coolant Temperature Sender Adapter - M12x1.5

T#:6827887

Part#: RGCTSAM12

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. For those looking to install an aftermarket coolant temp gauge, Race German has the perfect accessory for you! This adapter is machined out of aluminum and splices into your upper radiator hose. Perfect for use with Race German's E30 temperature gauge but has compatibility with a wire variety of other cars as well! Features: Tapped for M12x1.5 sized sensor 38mm diameter outlets which fit most BMW hoses Includes 2x hose clamps **Does not include temp sensor

Show More Show Less

Race German Coolant Temperature Sender Adapter - 1/8NPT

T#:6827888

Part#: RGCTSA1/8NPT

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. For those looking to install an aftermarket coolant temp gauge, Race German has the perfect accessory for you! This adapter is machined out of aluminum and splices into your upper radiator hose. Perfect for use with Race German's E30 temperature gauge but has compatibility with a wire variety of other cars as well! Features: Tapped for 1/8NPT sized sensor 38mm diameter outlets which fit most BMW hoses Includes 2x hose clamps **Does not include temp sensor

Show More Show Less

AutoTecknic Dry Carbon Fiber Cooling Plate - BMW G20/ G21 M340i 3-Ser...

T#:14386749

Part#: BM-0004-M340I

Ships on Jul 18, 2025

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

The AutoTecknic Dry Carbon Cooling Plate will provide your car with better air induction, providing the intake and engine with cooler air during high-speed driving; some customers have even reported better gas mileage and power gains.

Show More Show Less

Titanium Coolant Bleeder Screw Upgrade

T#:38621407

Part#: BMS-TCBS

In Stock

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Replace your fragile OEM plastic coolant bleeder screw, which is prone to cracking and failure, with a premium titanium upgrade built for strength and style under the hood. Factory plastic components weaken over time due to constant heat cycles, leading to brittleness and potential failure. Our titanium replacement delivers superior durability, being twice as strong as aluminum yet 45% lighter than steel, ensuring unmatched resilience and long-term reliability for your coolant system. More than an upgrade, it’s a must-have for engine longevity. CNC-machined from solid titanium, each screw features a laser-etched Burger Motorsports logo and is hand-burned to create unique color patterns—no two are alike. A heavy-duty replacement O-ring is included for a perfect fit.

Show More Show Less

Autotecknic Dry Carbon Fiber Cooling Shroud - G20 340i

T#:21209849

Part#: ATK-BM-0004-M340

Ships on Jul 18, 2025

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may have not been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Made from dry carbon this shroud is durable and can stand strong in any driving environment. Dry carbon is the highest-quality version of carbon fiber products that are produced. Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Some customers have even reported better gas mileage and power gains.

Show More Show Less

BMS Heat Exchanger Upgrade - G-Chassis B58

T#:5095728

Part#: GCHASB58HEATEXCH

Ships on Jul 15, 2025

$ 480.00 USD

Add to Wish List

Qty

$ 480.00 USD

Add to Wish List

This heat exchanger upgrade is a high-quality replacement that dramatically lowers engine oil and water temperatures by providing a 50% larger cooling surface than OEM. The benefits are most noticed during back to back runs at higher boost levels where the factory cooling capacity can be overwhelmed resulting in ignition timing pull and reduced turbo efficiency. Direct bolt-in installation.

Show More Show Less

BMW Black Auxiliary Coolant Reservoir Cap

2X Entries For Our Spin To Win Sweepstakes!

T#:38128031

Part#: 201-0394-BLK

Ships Jul 11, 2025

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

BMW Black Auxiliary Coolant Reservoir Cap is the perfect upgrade for BMW owners looking to enhance both the aesthetics and functionality of their engine bay. Unlike generic aftermarket caps that overlook critical pressure regulation, this precision-engineered cap retains the OEM pressure release functionality, ensuring safe and reliable coolant system performance.

Crafted from high-quality billet aluminum, this reservoir cap offers superior durability and resistance to heat and fluids, preventing warping or degradation over time. Unlike adhesive-based cap covers that can loosen or fall off, this cap is a direct replacement for the factory component, providing a secure, high-performance solution.

OEM pressure release functionality – Maintains proper system regulation for optimal coolant performance
Premium billet aluminum construction – Offers enhanced durability and longevity
Direct replacement design – Secure fit without adhesives or modifications
Resistant to heat and fluids – Ensures long-lasting reliability in extreme conditions
Performance-inspired look – Adds a sleek, high-end appearance to your engine bay
Upgraded durability – Prevents cracking, leaks, and premature wear

Upgrade your BMW’s cooling system with the BMW Black Auxiliary Coolant Reservoir Cap, blending performance, reliability, and premium styling.

Show More Show Less

Silver Auxiliary Coolant Reservoir Cap

2X Entries For Our Spin To Win Sweepstakes!

T#:38128032

Part#: 201-0394-SIL

Ships Jul 11, 2025

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

BMW Silver Auxiliary Coolant Reservoir Cap is the perfect upgrade for BMW owners looking to enhance both the aesthetics and functionality of their engine bay. Unlike generic aftermarket caps that overlook critical pressure regulation, this precision-engineered cap retains the OEM pressure release functionality, ensuring safe and reliable coolant system performance.

Crafted from high-quality billet aluminum, this reservoir cap offers superior durability and resistance to heat and fluids, preventing warping or degradation over time. Unlike adhesive-based cap covers that can loosen or fall off, this cap is a direct replacement for the factory component, providing a secure, high-performance solution.

OEM pressure release functionality – Maintains proper system regulation for optimal coolant performance
Premium billet aluminum construction – Offers enhanced durability and longevity
Direct replacement design – Secure fit without adhesives or modifications
Resistant to heat and fluids – Ensures long-lasting reliability in extreme conditions
Performance-inspired look – Adds a sleek, high-end appearance to your engine bay
Upgraded durability – Prevents cracking, leaks, and premature wear

Upgrade your BMW’s cooling system with the BMW Silver Auxiliary Coolant Reservoir Cap, blending performance, reliability, and premium styling.

Show More Show Less

BMW Blue Auxiliary Coolant Reservoir Cap

2X Entries For Our Spin To Win Sweepstakes!

T#:38128029

Part#: 201-0394-BLU

Ships Jul 11, 2025

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

BMW Blue Auxiliary Coolant Reservoir Cap is the perfect upgrade for BMW owners looking to enhance both the aesthetics and functionality of their engine bay. Unlike generic aftermarket caps that overlook critical pressure regulation, this precision-engineered cap retains the OEM pressure release functionality, ensuring safe and reliable coolant system performance.

Crafted from high-quality billet aluminum, this reservoir cap offers superior durability and resistance to heat and fluids, preventing warping or degradation over time. Unlike adhesive-based cap covers that can loosen or fall off, this cap is a direct replacement for the factory component, providing a secure, high-performance solution.

OEM pressure release functionality – Maintains proper system regulation for optimal coolant performance
Premium billet aluminum construction – Offers enhanced durability and longevity
Direct replacement design – Secure fit without adhesives or modifications
Resistant to heat and fluids – Ensures long-lasting reliability in extreme conditions
Performance-inspired look – Adds a sleek, high-end appearance to your engine bay
Upgraded durability – Prevents cracking, leaks, and premature wear

Upgrade your BMW’s cooling system with the BMW Blue Auxiliary Coolant Reservoir Cap, blending performance, reliability, and premium styling.

Show More Show Less

Select Vehicle

Category

Home

Cooling

Brand

View All Brands

Price

Special Offers

New (4)

Shipping

Free Shipping on orders $49+ (5)