Maintain your driving machine's optimal performance with regular maintenance. BMW's recommended oil change intervals vary depending on driving habits. For enhanced performance, an oil change every 5,000 miles is advised for aggressive or city driving, while a maximum of 10,000 miles is recommended otherwise.

This comprehensive kit includes:

• 7L Special Tec B 5W-30 Motor Oil
• Engine Oil Filter with o-ring
• Oil Drain Plug with o-ring

Ensure your BMW operates flawlessly with this premium service kit from Turner Motorsport.

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

Kit Includes:

• Automatic transmission filter with associated hardware
• Oil pan gasket
• Drain plug with sealing washer
• Fill plug with sealing washer
• 7 quarts automatic transmission fluid

Fits the following BMW chassis with 8 speed transmissions:
E70, E71, F01, F02, F06, F07, F10, F12, F13, F13, F15, F16, F22, F23, F25, F26, F30, F31, F32, F33, F34, F36, G11

If your engine has higher mileage, don't neglect rod bearing replacement! These bearings are sandwiched between the connecting rod and crankshaft journal and are prone to failure due to overheating, lack of lubrication, or general wear. Replace your rod bearings and prevent a spun bearing.

Starting with ACL’s high-performance bearing shells, our Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Kit includes:

Turner Motorsport WPC-Treated Race Series Rod Bearing Shells (8) Genuine BMW Connecting Rod Bolts (8) Assembly Lube (4 oz.)

Akrapovic Rear Carbon Wing - BMW G22 G23 G82 G83

The Akrapovic Rear Carbon Wing - BMW G22 G23 G82 G83 is a high-performance aerodynamic upgrade designed for BMW M4, M440i, and other compatible models. Crafted from lightweight, handcrafted carbon fibre and finished with a high-gloss lacquer, this rear wing combines stunning aesthetics with motorsport-inspired functionality. The wing features a swan neck design mounted on CNC-machined aluminium brackets, optimized for the perfect balance between weight and performance. High-grade titanium reinforcements ensure structural stability at pivot points, while the aerofoil design maximizes downforce and minimizes drag. Fully adjustable to three levels, this wing allows drivers to fine-tune their setup for optimal performance. Approved with ABE and KBA 31882 type certification, it is both functional and road-legal. The understated Akrapovič monochrome logo on each side adds a touch of sophistication to this high-performance accessory.

Key Benefits:

• Lightweight, handcrafted carbon fibre construction for durability and performance.
• High-gloss lacquer finish for a sleek, premium appearance.
• Swan neck design with CNC-machined aluminium brackets for optimal weight-to-performance ratio.
• High-grade titanium reinforcements for enhanced structural stability.
• Motorsport-inspired aerofoil design maximizes downforce and minimizes drag.
• Fully adjustable to three levels for customizable performance.
• ABE approved with KBA 31882 type certification for road legality.
• Kit included mandatory fitting hardware.
• Compatible with BMW G22 G23 G82 G83 models.

Upgrade your BMW with the Akrapovic Rear Carbon Wing and experience the perfect blend of motorsport performance and premium design.

Featuring BFI Stage One 65A Billet Aluminum Engine Mounts and Installation Hardware!

From the factory, all BMWs utilize soft rubber or fluid-filled engine mounts. Not only are these mounts prone to degradation, they also allow ample movement of the drivetrain. This translates to looseness in your driveline, commonly associated with missed shifts and a generally isolated feeling.

To improve upon this issue, Black Forest Industries designed these upgraded mounts from the ground up. Their stage one mounts feature a proprietary 65A durometer bushing and bracket/cup design. Maximizing bushing area while minimizing vibration gives this mount the advantage of having the best ride characteristics possible from a urethane mount.

To aid in replacement, the enthusiasts at Turner Motorsport have packaged these mounts with all associated hardware. This ensures a smooth and comprehensive installation, free of stress caused by broken or lost hardware!

Features:

Perfect fit: Utilizing laser-scanning technology permits seamless integration with the factory engine mount arms. Quality tooling: All bosses are matched replicas with stock locations, and all tool clearances and specs are maintained. Heavy-duty construction: The use of billet aluminum instead of cast creates a mount that is dramatically stronger than its factory cast-construction counterpart. Performance design: 65A durometer bushings are geared toward the spirited driving enthusiast who wants better control over motor movement without sacrificing excessive vibrations. Choose BFI Stage 1 for a quality mount that eliminates drivetrain movement without adding excessive NVH.

Packaged by the enthusiasts at Turner Motorsport, this kit contains all the necessary hardware and gaskets that are needed when replacing your intake manifold.

Due to weak plastic construction and subpar flow, the B58 intake manifold is a common replacement component. If you're planning an intake manifold replacement, choose this kit for a seamless installation with new gaskets and Genuine BMW hardware.

Click "kit contents" for a detailed list of included components!