BMW Suspension Parts for BMW 4 Series G22 (2021+)

Enhance your BMW's handling and ride quality with the Dinan Performance Springs Kit. Paired with Dinan performance springs, this kit takes your driving experience to the next level. The progressive-rate bump stops included in the kit optimize spring rate, providing additional mechanical grip and preventing bottoming out and binding. Enjoy improved suspension travel and a simplified installation process with all hardware included.

• Improved handling
• Preserved ride quality
• Optimized spring rate for mechanical grip
• Maximized suspension travel
• Prevention of bottoming out and binding
• Simplified installation with included hardware
• Earns 1 point towards your Dinan badge

For over 35 years, Dinan has been at the forefront of BMW tuning, blending advancements in modification with a commitment to balanced performance. Installing a Dinan part means not only benefiting from carefully developed and tested components but also enjoying a four-year, 50,000-mile warranty. Embrace the "total package" approach, and once your car is fitted with enough Dinan parts, proudly display the exclusive trunk badge – a symbol of your conversion from stock to Dinan, celebrated by BMW enthusiasts everywhere.

Looking for upgraded lower control arms that don't limit adjustment capabilities like the OE control arms? These Turner Performance Lower Control Arms may be exactly what you need! These CNC'd billet aluminum control arms allow you to adjust roll center, camber, and track width easily and lock in your adjustments securely.

The construction of these control arms allows for significant weight savings, reducing unsprung weight, while maintaining high levels of strength that is up to track use and abuse. Instead of using traditional jam nuts, these Turner Control Arms utilize a pinch bolt and rotating clamp design that allows high clamping forces to lock in track width and camper specifications without making it difficult to keep bearings properly aligned. Stainless steel spacers are included to enable roll center correction for lowered vehicles. To further improve control arm operation over the OE design, these control arms use FK rod ends and high misalignment solid spherical bushings to get rid of binding and flex.

Features:

Lightweight Aluminum, Titanium, Chromoly and Stainless Steel construction
Correct ball joint angle for full articulation
Clamp design allows for easy access to lock down your alignment settings
Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends
Multiple size stainless steel roll center spacers for precise adjustment

Enhanced Performance. Aggressive Stance. Daily Comfort.

Transform both the look and handling of your BMW G2x or G42 with lowering springs engineered to deliver the perfect balance of performance, ride quality, and aesthetics. Designed to lower the vehicle approximately 1.5" in the front and 1.25" in the rear, these springs provide a more aggressive and athletic stance while tightening up body control and improving cornering response.

Manufactured in the USA using high-tensile chrome silicon steel and finished in a durable black powder coat for corrosion resistance, these springs are built to handle spirited driving without sacrificing everyday drivability. They are fully compatible with factory shocks, including models equipped with EDC dampers, making them an ideal upgrade for enthusiasts looking for sharper performance without a harsh ride.

Key Features:

Fits all BMW G2x/G42 RWD & xDrive chassis
Average lowering: 1.5" front / 1.25" rear for a performance-inspired stance
Improved chassis response and reduced body roll
Designed to retain comfort and compatibility with stock and EDC-equipped dampers
Durable black powder-coated finish resists corrosion
Precision manufactured in the USA for consistent quality and fitment
Tested and Tuned:
These lowering springs were developed and tested using real-world data gathered in-house by the ECS tuning team at their Wadsworth, Ohio, R&D facility. With extensive testing across a wide range of conditions, they're engineered to deliver reliable performance and lasting durability, whether you're hitting back roads or daily commuting.

Carbon Performance Intake and 3-Point Strut Brace Kit

We know the G20 and G42 BMW models deliver an incredible driving experience, whether equipped with the B48 or B58 engine. However, we’ve identified key areas where performance and style can be taken to the next level. That’s why we’ve developed the Turner Carbon Fiber Performance Kit, combining our Turner Carbon Fiber Intake System and Turner Carbon Fiber Strut Tower Brace into one ultimate package.

Turner Carbon Fiber Intake System

Upgrade your engine bay with our Turner Carbon Fiber Intake System, designed for maximum performance and style.

Unmatched Airflow: Our intake flows 8% more air than the factory system (445.0 CFM vs. 410.1 CFM), reducing stress on your turbo and delivering optimal performance.
Lower Intake Temps: The enclosed carbon fiber lid reduces intake temperatures by up to 13°F compared to open intakes, ensuring consistent performance.
Premium Materials: Built with a gloss carbon fiber intake tube featuring MAF scaling, a durable 6061-T6 anodized flange, and a wrinkle black powder-coated heat shield for strength and style.
High-Performance Filtration: Includes a conical, reusable air filter with 8-ply oiled cotton gauze and a velocity stack for superior filtration and efficiency.
This intake is the perfect blend of form and function, offering noticeable performance gains while giving your engine bay the high-end look it deserves.

Turner Carbon Fiber Strut Tower Brace

Inspired by the performance-focused "M" chassis, our Turner Carbon Fiber Strut Tower Brace is engineered to improve handling and chassis rigidity.

Enhanced Handling Dynamics: Reduces chassis flex by effectively distributing cornering loads between the strut towers, maintaining consistent wheel alignment geometry during aggressive driving.
Precision Engineering: CAD-designed for a seamless fit with factory mounting points, our strut brace is built with lightweight yet ultra-rigid carbon fiber featuring a 2x2 twill weave.
Durable Construction: Features billet aluminum mounts machined from 6061-T6 aluminum, type II anodized, and securely bonded to the carbon fiber for uncompromised strength and stability.
Striking Aesthetics: Our high-gloss carbon fiber design adds a motorsport-inspired look to your engine bay, complementing any BMW enthusiast's style.
Why Choose the Turner Performance Kit?

Performance Gains: Maximize airflow and structural rigidity to make your G20 or G42 sharper, more responsive, and more enjoyable to drive.
Premium Appearance: Transform your engine bay with matching carbon fiber components that deliver both performance and head-turning style.
Easy Installation: Both the intake and strut brace are designed for a straightforward, bolt-on installation using factory mounting points—no modifications required.
Whether you’re hitting the track or carving through back roads, the Turner Motorsport G20/G42 Carbon Fiber Performance Kit ensures your BMW delivers on all fronts: performance, handling, and aesthetics. Upgrade your 2 or 3 Series today with the Turner kit designed to bring your driving experience closer to the ultimate M-car level.

Dinan's Rear Toe Links add precision and predictability at the limit.

The stock rear toe links are built with rubber bushings and a curved forged alloy rod. This design allows the rear wheels to have excessive toe change under hard acceleration and braking. All of this flex in the stock toe links causes the car to be unstable. Dinan stops the flex by replacing the rubber bushings with Teflon coated machined steel rod ends and the OEM curved bar with straight billet aluminum rods, thus adding stability. The Dinan rear toe link also incorporates a hex nut shaped center to aid in the necessary fine adjustment of the toe link that is tough to achieve using the stock link.

Features:

Replaces the stock rear toe link & rubber bushings with precision machine black-anodized aluminum rods and racing-quality rod ends

Dramatically improves vehicle stability during hard cornering

Improves response by eliminating the deflection of the rubber bushings

Rod-ends are Teflon-lined for quiet operation

Rod-ends incorporate left and right hand thread, which allows quick and accurate toe adjustment by simply turning center turnbuckle eliminating the need to struggle with the factory eccentric adjustment

Rubber boots protect rod ends from environmental damage for long lasting performance and removes the need for constant cleaning