BMW Intake Parts for BMW 4 Series G22 (2021+)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

Eventuri - Corporate Logo
T#:396394
Part#: EVE-FLC
Ships in 2 Business Days
$ 30.00 USD
Free Shipping on orders $49 and up
This filter cleaning kit powers away dirt and contaminants leaving your filter in like-new condition.
Vargas Turbo Technologies - Corporate Logo
T#:638811
Part#: VTT-B58-VACCUM
Ships in 10 Business Days
Starting at $ 52.99 USD
Free Shipping on orders $49 and up
Starting at $ 52.99 USD
Free Shipping on orders $49 and up
Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.
Show More Show Less
Eventuri - Corporate Logo
T#:640792
Part#: EVE-661-G2-FTR
Ships in 2 Business Days
$ 95.00 USD
Free Shipping on orders $49 and up
Replacement filter for the Eventuri E46 M3 Carbon intake system, comes ready to install.


Eventuri BMW G20 M340I Carbon Intake
For Vehicles Produced Post November 2018
Eventuri - Corporate Logo
T#:2929025
Part#: G20B58-V2-INT
Ships in 5 Business Days
$ 1,495.00 USD
$ 1,495.00 USD
The BMW G20 B58 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the G20, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development, the folks at Eventuri noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore, the sealed airbox also has a heat shield with gold reflective to minimise the radiative heat transfer from the exhaust manifold. In order to maximize volume, they made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally, they use a custom-made high-flow dry filter that is ISO tested for filtration performance and has a larger filtration area than the stock filter.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:3062311
Part#: VTT-G2X-INT-1
Ships in 10 Business Days
$ 388.99 USD
Free Shipping
$ 388.99 USD
Free Shipping
Upgrade durability, flow and performance with a performance intake system. VTT is proud to announce its Modular Silicone/Billet intake system for the BMW G2X Platform with the B58TU engine. We invested many hours of testing and fitting this kit to get the best fitment, and highest quality. We are very happy with the results. Full disclosure, the factory intake system as far as the airbox is very good, but the intake tract down to the turbo, is full of twists turns, bellows, etc which can cause flow disruption. It also has a silencer which is a restriction as it bypasses air to quiet the intake sound. By removing all of these, and replacing them with our 3'-3.5' Silicone intake tube either to our 6' cone filter or the stock airbox you are removing all of those, and providing a free-flowing optimized air path from the filter or airbox to the turbo. From our testing we found up to 700WHP, the stock airbox is up to the task if stock appearance and sound is what you wish. Once you go over 700WHP, we suggest stepping up to the 6' cone with a built-in velocity stack.
Show More Show Less

Evolution Racewerks - Corporate Logo
T#:587528
Part#: BM-ICP019-T3
Ships on Aug 11, 2026
$ 359.99 USD
Free Shipping
$ 359.99 USD
Free Shipping
The factory charge pipes are made of plastic, which is fine for stock boost levels but does not hold up well under higher boost levels. The solution is to replace that plastic piece with a hard aluminum one from Evolution Racewerks. 6061 high-grade aluminum not only stands up to whatever you can throw at it, but it looks great at the same time. Don't risk detonating that 400.00 plastic pipe from BMW. Swap yours out and avoid the headache of needing to call a tow-truck or drive home in limp. Features: Increase throttle response and decreases turbo lag. Lightweight High Grade 6061 Aluminum Piping. Replaces the factory soft plastic charge pipe that is prone to breaking under high boost. Retains factory-style o-ring c-clip lock flange. Precision CNC machined MAP sensor and IAT flanges ensure a leak-free connection. Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Silicone Hump Hose included. Type III Hard Black Anodizing (for stealth and OEM look). Hard anodizing helps improve the durability of intercooler piping. Resists bent or dented piping. Compatible with the factory electronic diverter valve. Includes all hardware for a complete installation. Limited Lifetime Warranty.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:5189197
Part#: ATK-BM-0004-G22
Ships in 7 Business Days
$ 295.00 USD
$ 295.00 USD
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. AutoTecknic's Dry Carbon Cooling Plate provides the G22/G23/G26 4-Series with better air induction while providing the intake and engine with cooler air during high-speed driving. It also gives your engine bay a fresh appearance. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.
Show More Show Less

Fuel-It! - Corporate Logo
T#:47096350
Part#: FIG2B58BPIM
Ships on Aug 6, 2026
Starting at $ 2,299.00 USD
Free Shipping on orders $49 and up
Starting at $ 2,299.00 USD
Free Shipping on orders $49 and up
This 2000hp-capable port injection intake manifold with integrated high-density intercooler core will take your Gen2 B58 build to the next level! When it comes to intake manifolds, it doesn't get any better than this. The Fuel-It! intake manifold replaces your weak factory plastic B58 manifold with a direct-fit, high-flow, high-strength billet aluminum manifold. Features a huge intercooler core capable of supporting up to 2000hp, port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern, and 1/8" expansion ports perfect for direct port nitrous, water/methanol, or anything else you can imagine! Includes high-quality o-rings and all required hardware. Available with required port injection hardware (calibrated injectors with plug-and-play fuel line), or à la carte without the extra fueling hardware. The optional high-quality Bosch EV14 42mm fuel injectors are offered in 550cc, 750cc, and 950cc options.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:51883661
Part#: VTT-G2X-INT2
Ships in 10 Business Days
New Item
$ 284.99 USD
Free Shipping
$ 284.99 USD
Free Shipping
The VTT Modular Intake System is engineered for the BMW owner who wants to maximize performance without sacrificing the factory look of their engine bay.
Vargas Turbo Technologies - Corporate Logo
T#:51883663
Part#: VTT-G2X-INT4
Ships in 10 Business Days
New Item
$ 669.99 USD
Free Shipping
$ 669.99 USD
Free Shipping
Engineered specifically for the B58TU platform, the VTT Modular Intake System focuses on streamlining the journey from the atmosphere to your turbocharger.
Vargas Turbo Technologies - Corporate Logo
T#:51883666
Part#: VTT-G2X-INT5
Ships in 10 Business Days
New Item
$ 157.99 USD
Free Shipping
$ 157.99 USD
Free Shipping
The VTT Replacement Inlet is a high-flow component designed specifically for BMW G2X chassis vehicles already running a Vargas "GC" series turbocharger.


Fuel-It! - Corporate Logo
T#:403482
Part#: ACC-HOBBS
Ships on Aug 6, 2026
$ 55.00 USD
Free Shipping on orders $49 and up