BMW Intake Parts for BMW 4 Series G22 (2021+)

Dinan High Flow Drop-In Replacement Filter - BMW G2X G42 B46 B48 B58 ...

Call In Or Chat For Best Price!

T#:32516358

Part#: D401-0046

In Stock

12% off MSRP $ 73.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Qty

12% off MSRP

$ 73.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 64.99 USD

Add to Wish List

Dinan High Flow Drop-in Replacement Filters are a direct upgrade to your factory intake system and will instantly provide better flow to assist your engine in achieving maximum performance and efficiency! While factory paper filters function admirably, they can be restrictive to performance goals given the material used. They also require being replaced numerous times during the lifespan of the vehicle which can add up to a substantial amount in maintenance costs. Limited performance and increased maintenance costs are never ideal but can be resolved effectively and economically in the case of filters. Dinan High Flow Drop-in Replacement Filters are constructed of 4 layers of cotton gauze that allow better flow and less pressure drop than the stock media. This equates to the engine not needing to work as hard to make the same or more power. Additionally, the use of oiled cotton media means that the Dinan filters are washable/reusable while still retaining excellent filtration and ensuring your engine runs clean for the duration. When upgrading to a complete Dinan intake system for best performance, is not available, possible, or within the budget, Dinan High Flow Drop-in Replacement Filters have you covered! Features & Benefits: Less restrictive and better flowing than stock allowing maximum engine performance and efficiency Direct replacement for stock air filter 4 layers of proprietary high flow oiled cotton gauze material for exceptional filtration Washable and reusable for the life of the engine Quick and easy installation

Show More Show Less

Dinan B58 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G42, To...

Call In Or Chat For Best Price!

T#:8076779

Part#: D760-0062

In Stock

11% off MSRP $ 212.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 188.95 USD

Add to Wish List

Qty

11% off MSRP

$ 212.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 188.95 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 14% increase in overall volume over OEM inlet. Average of 7.7% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

Dinan Carbon Fiber Cold Air Intake Kit - G20/22/23/26 3 & 4 Series B5...

Call In Or Chat For Best Price!

T#:5567101

Part#: D760-0058

Back Ordered

11% off MSRP $ 652.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 579.99 USD

Add to Wish List

Qty

11% off MSRP

$ 652.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 579.99 USD

Add to Wish List

The M440i/M340i is an impressive car in terms of performance and style but that is not conveyed when viewing its lackluster stock intake system swaddled by seemingly unfinished strut braces. In stock trim, the M440i/M340i comes with a dry and lifeless airbox housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially BMW has seen fit to give M440i/M340i owners an airbox that looks uninspiring, flows adequately but not ideally, and emits no noise. The exact opposite of what the platform exudes otherwise. The Dinan carbon fiber intake for the platform rights these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in additional top-end power and increased throttle response. At the same time revealing a more aggressive, sporty carbon fiber appearance, and an increase in sound courtesy of the removal of the intake resonator and implementation of a semi-open design. In order to achieve the gains in flow that set the Dinan intake system apart, the entire lower box of the system, and not just the lid, has been reworked and enlarged in an effort to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free-flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged airbox and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box located on the opposite side from the engine provided a perfect balance of additional volume to assist the factory inlet all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). With more air being pulled into the system, throttle response is improved and additional power is realized in the form of max gains of +9 WHP / +8 ft-lbs of torque. The secondary air inlets also allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased power and sound, the outwardly visible system is made of immaculate carbon fiber so the under the hood appeal is vastly improved over its drab and utilitarian beginnings. A worthy piece to add to an already impressive vehicle. Features: More Power: Max gains of 9 WHP and 8 lb-ft of torque @ 6500 RPM on a completely stock vehicle. Enjoyably louder, sportier sound. Improved throttle response Outflows factory intake by 58% or more. Larger volume airbox (60% larger than stock). 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow. Compatible with all G2X MX40i's with and without factory bracing. Quick and easy installation

Show More Show Less

Dinan PEX Cold Air Intake - G2X B58

Call In Or Chat For Best Price!

T#:21933040

Part#: D760-0069

In Stock

11% off MSRP $ 539.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 479.99 USD

Add to Wish List

Qty

11% off MSRP

$ 539.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 479.99 USD

Add to Wish List

Looking for more, for less? The all new G2x/G4x Mx40i PEX Intake delivers all the performance and sound benefits as its carbon fiber sibling -- just with less showmanship -- resulting in the best dollar-per-horsepower B58 intake system available from Dinan. The Mx40i's are an impressive lot in terms of performance and style but that is not conveyed when viewing its lackluster stock intake system swaddled by seemingly unfinished strut braces (where applicable). In stock trim, the Mx40i comes with a dry and lifeless air box housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially BMW has seen fit to give Mx40i owners an air box that looks uninspiring, flows adequately but not ideally, and emits no noise. The exact opposite of what the platform exudes otherwise. The Dinan PEX intake for the platform corrects these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in additional top end power and improved throttle response. At the same time revealing an enhanced OEM-like appearance that blends seamlessly with surrounding factory plastic under hood components, and an increase in sound courtesy of the removal of the intake resonator and implementation of a semi-open design. To achieve the gains in flow that set the Dinan intake system apart, the entire lower box of the system, and not just the lid, has been reworked and enlarged to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged air box and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box located on the opposite side from the engine provided a perfect balance of additional volume to assist the factory inlet all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). With more air being pulled into the system, throttle response is improved and additional power is realized in the form of max gains of +9 WHP / +8 ft-lbs of torque. The secondary air inlets also allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. While power and sound are the stars, the modest PEX construction fuses effortlessly into the factory engine bay for a reserved visual that despite basic materials still manages to draw attention. It's an economical solution to form and function for a vehicle that permeates both. Features: More Power: Max gains of 9 WHP and 8 lb-ft of torque on a completely stock vehicle High heat deflection PEX construction and an OEM look Enjoyably louder, sportier sound Improved throttle response Outflows factory intake by 58% or more Larger volume air box (60% larger than stock) 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow Compatible with all G2x Mx40i's with and without factory bracing Quick and easy installation NOTE: This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA.

Show More Show Less

Eventuri Filter Cleaning Kit

T#:396394

Part#: EVE-FLC

Ships in 2 Business Days

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

This filter cleaning kit powers away dirt and contaminants leaving your filter in like-new condition.

Dinan High Performance Intercooler Heat Exchanger - G2X G42 A90 B48 B...

Call In Or Chat For Best Price!

T#:25805796

Part#: D780-0003

Ships on Aug 7, 2026

11% off MSRP $ 506.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 449.99 USD

Add to Wish List

Qty

11% off MSRP

$ 506.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 449.99 USD

Add to Wish List

The OE thermal management system for the B4x/B58 G-chassis BMW and Toyota GR Supra offers an improved formula from prior generations. With a setup where engine coolant is also re-routed through the heat exchanger, the system effectively assists in overall engine cooling as well as charge cooling. However, like its predecessors, it has room for improvement as it can be overwhelmed when the system is taxed aggressively or as power levels are increased. Once overburdened, this results in the undesirable outcome of power being diminished. Avoidance of this unwelcome scenario can be attained though with a Dinan heat exchanger that improves the overall thermal management system so everything runs cooler and more efficiently while being budget-friendly. The Dinan B4x/B58 heat exchanger for the BMW G2x/G4x and Toyota A9x Supra assists in improving overall charge cooling using a more robust core (45mm thick Dinan core vs. 26.75mm thick OEM core) that wields 68% more heat transfer surface area for improved cooling capacity. The significant increase in core thickness and full-size end tanks contribute to the overall thermal mass (ability to absorb, store, and release heat) improvement beyond the OEM setup. With up to a nearly 12º reduction in charge air temps recorded over stock, the Dinan heat exchanger is ready, and able, to assist in extending your vehicle's ability to deliver maximum performance time and time again for your driving enjoyment! Features: Average of 8.7º C reduction in charge air temps with a maximum reduction of nearly 12º C over 30 successive WOT pulls General improvement to the efficiency of the thermal management system, inclusive of engine cooling 45mm thick Dinan core vs. 26.75mm thick stock cooler core 68% more cooling surface area and volume than stock Reduces the tendency to heat soak / go in to limp mode Durable bar and plate design that is less susceptible to damage from road debris Pressure tested, 100% TIG welded, Aluminum construction Direct fit replacement with no modifications required Installation Instructions: https://documents.dinancars.com/d780-0003.pdf NOTE: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

BMW B58 3.0L Charge Pipe - Wrinkle Black

For Vehicles Produced from 12/19

T#:28604064

Part#: 15-007

In Stock

5% off MSRP $ 299.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 284.99 USD

Add to Wish List

Qty

5% off MSRP

$ 299.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 284.99 USD

Add to Wish List

BMW B58 3.0L Charge Pipe - Wrinkle Black addresses common issues with the factory plastic charge pipe, which is prone to blow-outs and can lead to engine limp mode and performance loss. This high-performance upgrade by Active Autowerke features a robust all-aluminum construction that enhances durability and prevents structural failure. The CNC-machined connection ensures a precise fit and reliable seal at the throttle body. With wrinkle black powder coating for a sleek, OEM appearance, this charge pipe improves throttle response and performance, making it a superior choice for your BMW.

Replaces the factory plastic charge pipe with durable all-aluminum construction
Prevents blow-outs and engine limp mode issues
CNC-machined connection for a precise and reliable fit
Consistent diameter tubing enhances performance
Increases throttle response and reduces throttle lag
Retains factory BMW o-ring seal for a secure fit
Includes two raised bosses for Water/Methanol Injection (WMI) nozzles
Wrinkle black powder-coated for a sleek, OEM look
Comes with high-quality silicone couplers and stainless clamps for easy installation
Ideal upgrade for B58TU-equipped BMW models to safeguard against charge pipe failure

Show More Show Less

Dinan Carbon Fiber Cold Air Intake Kit - G20/22/23/26 3 & 4 Series B4...

Call In Or Chat For Best Price!

T#:5567102

Part#: D760-0059

In Stock

11% off MSRP $ 643.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 571.99 USD

Add to Wish List

Qty

11% off MSRP

$ 643.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 571.99 USD

Add to Wish List

In the quest to be all things to all people at an attractive price point the 430i/330i has been reduced to a mundane, albeit pragmatic, core with elements devoid of any character both outwardly and inwardly. For example, in stock trim, the 430i/330i comes with a utilitarian and lifeless air box swaddled by seemingly unfinished braces and housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially, BMW has seen fit to give 430i/330i owners an air box that looks uninspiring, flows adequately but not ideally, and emits no noise. The Dinan carbon fiber intake for the platform rights these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in improved throttle response and the elimination of a potential roadblock when opting to pursue a high-powered build (upgraded turbo, fueling, etc). At the same time the Dinan kit unveils a more aggressive, sporty carbon fiber appearance, and an increase in sound courtesy of the removal of the intake resonator and implementation of the semi-open design. In order to accomplish the feat in flow that sets the Dinan intake system apart the entire lower box of the system, and not just the lid, has been reworked and enlarged in an effort to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged air box and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box on the opposite side from the engine provided a perfect balance of additional volume to assist the factory snorkel all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). While the additional flow does not translate to any noteworthy rise in power output for stock or basic bolt-on equipped vehicles, the Dinan intake system does expand the potential of the platforms power ceiling. Put simply, those striving to build a more potent and robust solution, complete with turbo and fueling upgrades, will be allowed to maximize the results without worry about the intake system being a limiting factor. Regardless of the level of build, the secondary air inlets allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased flow and sound, the outwardly visible system is made of immaculate carbon fiber so under-hood appeal is vastly improved over its drab and utilitarian beginnings. In and of itself, making it worth the price of admission. Features: Outflows factory intake by 58% or more. Enjoyably louder, sportier sound. Beautifully crafted carbon fiber construction (lid and tube). Improved throttle response. Larger volume airbox (60% larger than stock). 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow. Compatible with all G2X X30i's with and without factory bracing. Quick and easy installation.

Show More Show Less

Dinan PEX Cold Air Intake - G2X B46

Call In Or Chat For Best Price!

T#:21933039

Part#: D760-0070

In Stock

11% off MSRP $ 514.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 456.95 USD

Add to Wish List

Qty

11% off MSRP

$ 514.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 456.95 USD

Add to Wish List

Looking for more, for less? The all new G2x/G4x x30i PEX Intake delivers all the performance and sound benefits as its carbon fiber sibling -- just with less showmanship -- resulting in the best dollar-per-horsepower B46/B48 intake system available from Dinan. In the quest to be all things to all people at an attractive price point the x30i's have been reduced to a mundane, albeit pragmatic, core with elements devoid of any character both outwardly and inwardly. For example, in stock trim, the 230i/330i/430i comes with a utilitarian and lifeless air box swaddled by seemingly unfinished braces (where applicable) and housing a basic panel filter that is also accompanied by an intake resonator whose job it is to eliminate turbo/intake noises. The same noises that those in the performance world relish. Essentially, BMW has seen fit to give x30i owners an air box that looks uninspiring, flows adequately but not ideally, and emits no noise. The Dinan PEX intake for the platform rights these wrongs and delivers a semi-open intake capable of flowing 58% more air than the stock system resulting in improved throttle response and the elimination of a potential roadblock when opting to pursue a high-powered build (upgraded turbo, fueling, etc.). At the same time revealing an enhanced OEM-like appearance that blends seamlessly with surrounding factory plastic under hood components, and an increase in sound courtesy of the removal of the intake resonator and implementation of a semi-open design. To accomplish the feat in flow that sets the Dinan intake system apart the entire lower box of the system, and not just the lid, has been reworked and enlarged to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan in order to effectively fill the volume of the enlarged air box and increased filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box on the opposite side from the engine provided a perfect balance of additional volume to assist the factory snorkel all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). While the additional flow does not translate to any noteworthy rise in power output for stock or basic bolt-on equipped vehicles, the Dinan intake system does expand the potential of the platforms power ceiling. Put simply, those striving to build a more potent and robust solution, complete with turbo and fueling upgrades, will be allowed to maximize the results without worry of the intake system being a limiting factor. Regardless of the level of build, the secondary air inlets allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. While increased flow and sound are the stars, the modest PEX construction fuses effortlessly into the factory engine bay for a reserved visual that despite basic materials still manages to draw attention. It's an economical solution to form and function for a vehicle that permeates both. Features: Outflows factory intake by 58% or more Enjoyably louder, sportier sound High heat deflection PEX construction and an OEM look Improved throttle response Larger volume air box (60% larger than stock) 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow Compatible with all G2x/G4x x30i's with and without factory bracing Quick and easy installation NOTE: This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA

Show More Show Less

Eventuri Replacement Air Filter Element for Carbon Intake Kit - E46 M...

T#:640792

Part#: EVE-661-G2-FTR

Ships in 2 Business Days

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

Replacement filter for the Eventuri E46 M3 Carbon intake system, comes ready to install.

Forge Motorsport Valve Service Kit

T#:28271173

Part#: FMDV004S

Ships on Aug 14, 2026

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Dinan B46 Turbo Inlet Pipe - Carbon Fiber - BMW G20 G22/23/26 G29 G42...

Call In Or Chat For Best Price!

T#:8076777

Part#: D760-0060

In Stock

11% off MSRP $ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Qty

11% off MSRP

$ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD

Add to Wish List

Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 24% increase in overall volume over OEM inlet. Average of 12.5% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Eventuri BMW G20 M340I Carbon Intake

For Vehicles Produced Post November 2018

T#:2929025

Part#: G20B58-V2-INT

Ships in 5 Business Days

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

The BMW G20 B58 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the G20, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development, the folks at Eventuri noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore, the sealed airbox also has a heat shield with gold reflective to minimise the radiative heat transfer from the exhaust manifold. In order to maximize volume, they made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally, they use a custom-made high-flow dry filter that is ISO tested for filtration performance and has a larger filtration area than the stock filter.

Show More Show Less

Evolution Raceworks B48 Charegepipe - Black Anodized - BMW F22/23 F3X...

T#:587528

Part#: BM-ICP019-T3

Ships on Aug 11, 2026

$ 359.99 USD

Add to Wish List

Qty

$ 359.99 USD

Add to Wish List

The factory charge pipes are made of plastic, which is fine for stock boost levels but does not hold up well under higher boost levels. The solution is to replace that plastic piece with a hard aluminum one from Evolution Racewerks. 6061 high-grade aluminum not only stands up to whatever you can throw at it, but it looks great at the same time. Don't risk detonating that 400.00 plastic pipe from BMW. Swap yours out and avoid the headache of needing to call a tow-truck or drive home in limp. Features: Increase throttle response and decreases turbo lag. Lightweight High Grade 6061 Aluminum Piping. Replaces the factory soft plastic charge pipe that is prone to breaking under high boost. Retains factory-style o-ring c-clip lock flange. Precision CNC machined MAP sensor and IAT flanges ensure a leak-free connection. Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Silicone Hump Hose included. Type III Hard Black Anodizing (for stealth and OEM look). Hard anodizing helps improve the durability of intercooler piping. Resists bent or dented piping. Compatible with the factory electronic diverter valve. Includes all hardware for a complete installation. Limited Lifetime Warranty.

Show More Show Less

4MM Silicone Vacuum Hose - Red - 9 Feet

T#:370918

Part#: VC04R

Back Ordered

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

Show More Show Less

Autotecknic Dry Carbon Fiber Cooling Shroud - G22/G23/G26 4-Series ...

T#:5189197

Part#: ATK-BM-0004-G22

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. AutoTecknic's Dry Carbon Cooling Plate provides the G22/G23/G26 4-Series with better air induction while providing the intake and engine with cooler air during high-speed driving. It also gives your engine bay a fresh appearance. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

Fuel-It! Billet Port Injection Manifold - BMW Gen 2 B58 (B58D / B58TU...

T#:47096350

Part#: FIG2B58BPIM

Ships on Aug 6, 2026

Starting at $ 2,299.00 USD

Add to Wish List

Starting at $ 2,299.00 USD

Add to Wish List

This 2000hp-capable port injection intake manifold with integrated high-density intercooler core will take your Gen2 B58 build to the next level! When it comes to intake manifolds, it doesn't get any better than this. The Fuel-It! intake manifold replaces your weak factory plastic B58 manifold with a direct-fit, high-flow, high-strength billet aluminum manifold. Features a huge intercooler core capable of supporting up to 2000hp, port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern, and 1/8" expansion ports perfect for direct port nitrous, water/methanol, or anything else you can imagine! Includes high-quality o-rings and all required hardware. Available with required port injection hardware (calibrated injectors with plug-and-play fuel line), or à la carte without the extra fueling hardware. The optional high-quality Bosch EV14 42mm fuel injectors are offered in 550cc, 750cc, and 950cc options.

Show More Show Less

Dinan Experience Package (E) - G2X M340i/M440i

For vehicles with the B58TU (B58D) engine only

Call In Or Chat For Best Price!

T#:45997489

Part#: G2XM340IM440IEKT

Back Ordered

$ 3,752.99 USD

Add to Wish List

Qty

$ 3,752.99 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience.

Show More Show Less

Forge Silicone Vacuum Hoses

T#:558490

Part#: FORGEVAC

Ships on Aug 11, 2026

Starting at $ 14.99 USD

Add to Wish List

Starting at $ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? Choose from a 4mm, 5mm, or 6mm diameter vacuum hose from Forge to fix your leak and bring your BMW back to life.

3MM Silicone Vacuum Hose - Red - 9 Feet

T#:370915

Part#: VC03R

Back Ordered

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Upgrade your BMW's vacuum system with the Forge 3MM Silicone Vacuum Hose in Red, a high-quality solution designed for optimal performance and durability. This 9-foot silicone vacuum hose provides superior flexibility and resistance to extreme temperatures, making it ideal for various automotive applications. Engineered with precision, it ensures reliable vacuum pressure for efficient engine operation and component functionality. Whether you're replacing worn-out hoses or customizing your BMW's vacuum setup, the Forge Silicone Vacuum Hose offers reliability and performance you can trust.