CNC Billet License Plate Bracket

T#:27105150

Part#: RE.061

In Stock

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.

Show More Show Less

Dinan Slimline License Plate Frame - Brushed Finish

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:23185033

Part#: D010-0017

In Stock

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

High-quality stainless steel slimline license plate frame with Dinan logo.

Autoteknic Universal Carbon Fiber Splitter

T#:396026

Part#: UN-0001-CF

Ships in 7 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

AutoTecknic Universal Carbon Fiber Splitter

The AutoTecknic universal carbon fiber splitter offers an upgraded front-end aesthetic for your vehicle. Crafted with 3K plain weave carbon fiber and a UV clear coat, these splitters boast a lustrous mirror shine finish. Compatible with various bumpers upon proper installation, they deliver:

Made from 3K plain weave carbon fiber with a UV clear coat finish
Compatibility with various bumpers with appropriate installation
Pre-installation drilling for mounting holes required
Vehicle-specific installation hardware not included
Provides a sporty appearance without excessive aggressiveness
Shields the bumper against speed bumps and road dips
Enhances the overall vehicle appearance while ensuring protection

Designed for those seeking a subtle yet sporty visual enhancement, these splitters safeguard your bumper while boosting your car's aesthetics. Recommended by numerous customers for both its visual appeal and functional benefits.

Package Contents: One set of AutoTecknic universal carbon fiber splitters.

Splitter Dimensions: 21" (Length) x 10" (Depth) x 5" (Width)

Show More Show Less

Suvneer Motorsports™ Carbon Fiber Rear Bumper Splitters - G22 M440i...

For models with the M Sport Appearance Package only

T#:26005161

Part#: G22MTRRSPL

In Stock

$ 280.00

This product was last offered at the strikethrough price on
05-03-2026

$ 259.00 USD

Limited Qty Sale

Add to Wish List

Qty

$ 280.00

This product was last offered at the strikethrough price on
05-03-2026

$ 259.00 USD

Limited Qty Sale

Add to Wish List

Suvneer Motorsports™ presents the G22 Carbon Fiber Rear Bumper Splitters – a cutting-edge addition to elevate the style and performance of your vehicle. Meticulously crafted with precision, these splitters are designed to seamlessly integrate with the rear bumper of various car models, enhancing both the aesthetic appeal and aerodynamic efficiency. Constructed from high-quality carbon fiber, the G22 Carbon Fiber Rear Bumper Splitters not only exude a sense of sophistication but also contribute to the overall durability and lightweight nature of the product. The carbon fiber material is chosen for its strength and resilience, ensuring long-lasting performance while adding a touch of modern elegance to your car's rear end. Key Features: Material: High-quality dry carbon fiber Precision Fitment: Designed for the G22 M Sport ONLY chassis for a seamless integration Lightweight: Carbon fiber construction reduces weight while maintaining strength Aerodynamic Enhancement: Improves airflow and downforce for better stability Sleek Design: Adds a sporty and aggressive look to your vehicle Build Material: Fiber-Reinforced Polymer and Glossy Carbon Fiber Coating We encourage customers to seek professional installation since equipping these products will require the removal of parts currently installed, to better secure fitment to your vehicle.

Show More Show Less

Dinan License Plate Frame - Stainless Steel

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:27205338

Part#: D010-0012

Back Ordered

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Dinan Marque Plate - Black with Centered Logo

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:27205366

Part#: D010-0016

Ships in 6 Business Days

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

AutoTecknic Dry Carbon Roof Antenna Cover - 2x2 Weave - G01 G02 G05 G...

T#:39126843

Part#: BM-0332

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

This high-quality AutoTecknic carbon fiber antenna cover as a must-have upgrade for enthusiasts seeking both form and function. Elevate the look of a BMW with this precision-crafted component.

Tool - Washer Nozzle Adjuster

10X Entries Into Our F80 M3 Sweepstakes

T#:581610

Part#: WNATOOL

In Stock

Sale - Save 25% $ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 19.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 19.49 USD

Add to Wish List

Akrapovic Rear Wing Forged Carbon Fiber W/brackets G22 G23 G82 G83 ...

T#:37993446

Part#: WI-BM/CA/1/CFKT2

Back Ordered

$ 5,530.00 USD

Add to Wish List

Qty

$ 5,530.00 USD

Add to Wish List

Akrapovic Rear Wing Forged Carbon Fiber - G22 G23 G82 G83

The Akrapovic Rear Wing Forged Carbon Fiber - G22 G23 G82 G83 is a premium aerodynamic upgrade designed for BMW M2, M240i, and other compatible models. Crafted from lightweight, handcrafted chopped carbon fibre and finished with a high-gloss lacquer, this rear wing combines striking aesthetics with motorsport-inspired performance. The swan neck design, supported by CNC-machined aluminium brackets, ensures an optimal balance between weight reduction and structural strength. High-grade titanium reinforcements at pivot points enhance durability, while the aerofoil design maximizes downforce and minimizes drag for superior handling. Fully adjustable to three levels, this wing allows drivers to customize their setup for peak performance. ABE approved with KBA 31882 type certification, it is road-legal and features an understated Akrapovič monochrome logo on each side for a refined touch. Optimized using computational fluid dynamics (CFD), this wing ensures minimal air turbulence and noise, making it a perfect fit for BMW G22, G23, G42, G80, G82, G83, and G87 models.

Key Benefits:

Lightweight, handcrafted chopped carbon fibre construction for durability and performance.
High-gloss lacquer finish for a sleek, premium appearance.
Swan neck design with CNC-machined aluminium brackets for optimal weight-to-strength ratio.
High-grade titanium reinforcements for enhanced structural stability.
Motorsport-inspired aerofoil design maximizes downforce and minimizes drag.
Fully adjustable to three levels for customizable performance tuning.
ABE approved with KBA 31882 type certification, ensuring road legality.
Optimized using computational fluid dynamics (CFD) for minimal air turbulence and noise.
Compatible with BMW G22, G23, G82, and G83 models.

Upgrade your BMW with the Akrapovic Rear Wing Forged Carbon Fiber and experience the perfect blend of cutting-edge aerodynamics and premium craftsmanship.

Show More Show Less

AutoTecknic Smoked Dynamic Sequential LED Turn Signal - G20 3-Series ...

T#:39025549

Part#: BM-0261-G2X

Ships in 7 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Upgrade your BMW G20 3-Series or G22 4-Series with the AutoTecknic Smoked Dynamic Sequential LED Turn Signals from Turner Motorsport, combining enhanced style, safety, and performance for your vehicle.

Show More Show Less

Suvneer M3 Designed G22 Carbon Fiber Mirror Caps

T#:19461752

Part#: G22CFMIR

Ships in 6 Business Days

$ 240.00 USD

Add to Wish List

Qty

$ 240.00 USD

Add to Wish List

The M3 Designed G22 Carbon Fiber Mirror Caps are a premium accessory that combines stunning aesthetics, lightweight construction, and enhanced performance. They add a touch of sophistication and exclusivity to your BMW G22 series vehicle, elevating its overall appearance and setting it apart from the crowd.

Show More Show Less

AUTOTECKNIC M-Inspired Carbon Fiber Mirror Caps - G22

T#:21078400

Part#: ATK-BM-0111-DCG-

Ships in 7 Business Days

$ 385.00 USD

Add to Wish List

Qty

$ 385.00 USD

Add to Wish List

Carbon Fiber replacement mirror covers by Autotecknic. Designed for a seamless OEM fit. Great for lost, damaged, or worn mirror covers and people just looking to upgrade! Composed of carbon fiber with a glossy black finish.

Show More Show Less

AUTOTECKNIC M-Inspired Painted Mirror Caps - G22 4-SERIES

T#:21078399

Part#: ATK-BM-0111-P

Ships in 7 Business Days

$ 195.00 USD

Add to Wish List

Qty

$ 195.00 USD

Add to Wish List

Give your car a visual upgrade with these M-inspired mirror caps! Includes a full set of both left and right caps. These mirror caps are durable and ready to give your car some more personality!

R1 Designed Carbon Fiber Trunk Spoiler - BMW G22 4-Series & G82 M4 ...

T#:26771692

Part#: G22CFR1SPOILER

Ships in 6 Business Days

$ 345.00 USD

Add to Wish List

Qty

$ 345.00 USD

Add to Wish List

Introducing the R1 Designed G22 & G82 Carbon Fiber Trunk Spoiler, a stunning and performance-driven enhancement for your BMW. Crafted with meticulous attention to detail and utilizing advanced carbon fiber technology, this spoiler exemplifies sophistication and aerodynamic excellence. Precision-engineered to seamlessly integrate with the contours of your BMW's trunk, this spoiler boasts a sleek and aggressive design that instantly elevates the vehicle's appearance. The carbon fiber construction not only enhances the visual appeal with its distinct weave pattern but also offers unmatched strength and durability while keeping weight to a minimum. Designed to optimize aerodynamics, the R1 trunk spoiler reduces drag and enhances downforce, improving stability and traction at high speeds. Whether cruising on the highway or carving through winding roads, this spoiler ensures maximum performance while adding a touch of sportiness to your BMW's exterior. Elevate your driving experience and stand out from the crowd with the R1 Designed G22 & G82 Carbon Fiber Trunk Spoiler, the ultimate expression of style and performance for your BMW. Key Features: Material: High-quality dry carbon fiber Precision Fitment: Designed for the G22 & G82 chassis for a seamless integration Lightweight: Carbon fiber construction reduces weight while maintaining strength Aerodynamic Enhancement: Improves airflow and downforce for better stability Sleek Design: sleek spoiler design adds a sporty and aggressive look to your vehicle Build Material: Fiber-Reinforced Polymer and Glossy Carbon Fiber Coating Professional installation is recommended.

Show More Show Less

AutoTecknic Dry Carbon Roof Antenna Cover - 1x1 Weave - G01 G02 G05 G...

T#:49023054

Part#: BM-0332-1X1

Ships in 7 Business Days

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

This high-quality AutoTecknic carbon fiber antenna cover as a must-have upgrade for enthusiasts seeking both form and function. Elevate the look of a BMW with this precision-crafted component.

Bav Auto Door Window Holder Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:580399

Part#: B8800087

In Stock

Sale - Save 25% $ 20.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 20.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.74 USD

Add to Wish List

Avoid dropping your glass window into your door and possibly breaking it.

M3 Designed Carbon Fiber Mirror Caps - G2x / G42

Does Not Fit M240i/M340i

T#:21735901

Part#: G2XCFMIR

Ships on Oct 2, 2026

$ 240.00 USD

Add to Wish List

Qty

$ 240.00 USD

Add to Wish List

These Suvneer carbon fiber mirror covers are the perfect subtle upgrade for your car. This carbon fiber will give your car an aggressive look that will make your car stand out from the rest! Build Material: Fiber-reinforced polymer and glossy carbon fiber coating

Show More Show Less

Relief Valve For Media Blaster

10X Entries Into Our F80 M3 Sweepstakes

T#:640910

Part#: B1100031RELIEF

Special Order: No Guaranteed ETA

Sale - Save 25% $ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5.99 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

BMW Exterior Trim, Body Parts, Aero and Styling for BMW 4 Series G22 (2021+)

Sub-Categories

CNC Billet License Plate Bracket

Dinan Slimline License Plate Frame - Brushed Finish

Autoteknic Universal Carbon Fiber Splitter

AutoTecknic Universal Carbon Fiber Splitter

Suvneer Motorsports™ Carbon Fiber Rear Bumper Splitters - G22 M440i...

Dinan License Plate Frame - Stainless Steel

Dinan Marque Plate - Black with Centered Logo

AutoTecknic Dry Carbon Roof Antenna Cover - 2x2 Weave - G01 G02 G05 G...

Tool - Washer Nozzle Adjuster

Akrapovic Rear Wing Forged Carbon Fiber W/brackets G22 G23 G82 G83 ...

Akrapovic Rear Wing Forged Carbon Fiber - G22 G23 G82 G83

Key Benefits:

AutoTecknic Smoked Dynamic Sequential LED Turn Signal - G20 3-Series ...

Suvneer M3 Designed G22 Carbon Fiber Mirror Caps

AUTOTECKNIC M-Inspired Carbon Fiber Mirror Caps - G22

AUTOTECKNIC M-Inspired Painted Mirror Caps - G22 4-SERIES

R1 Designed Carbon Fiber Trunk Spoiler - BMW G22 4-Series & G82 M4 ...

AutoTecknic Dry Carbon Roof Antenna Cover - 1x1 Weave - G01 G02 G05 G...

Bav Auto Door Window Holder Kit

M3 Designed Carbon Fiber Mirror Caps - G2x / G42

Relief Valve For Media Blaster

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results