Oil Service for BMW 4 Series G22 (2021+)

Clear BMW chassis

Please ensure your correct model is selected

Need to change your oil? We've put together oil service kits that include the right amount of fluids and correct filter so you don't have to do any research. You can count on our oil service kits, as we've compiled these kits from brands that we trust like Liqui-Moly and Hengst.

Sub-Categories

Sort By:

Liqui Moly Special Tec B 5W-30 Oil Change Kit - B58 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:23847536
Part#: LMSPC5W30KT
In Stock
Sale - Save 6% $ 121.99

This product was last offered at the strikethrough price on
08-31-2026

$ 114.29 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 121.99

This product was last offered at the strikethrough price on
08-31-2026

$ 114.29 USD
Free Shipping on orders $49 and up

Maintain your driving machine's optimal performance with regular maintenance. BMW's recommended oil change intervals vary depending on driving habits. For enhanced performance, an oil change every 5,000 miles is advised for aggressive or city driving, while a maximum of 10,000 miles is recommended otherwise.

This comprehensive kit includes:

  • 7L Special Tec B 5W-30 Motor Oil
  • Engine Oil Filter with o-ring
  • Oil Drain Plug with o-ring

Ensure your BMW operates flawlessly with this premium service kit from Turner Motorsport.

Show More Show Less
B58 Liqui Moly Top Tec 6600 0W-20 Oil Change Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:22130458
Part#: LMTPTCHOILCHNGKT
In Stock
Sale - Save 5% $ 113.99

This product was last offered at the strikethrough price on
08-31-2026

$ 107.82 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 113.99

This product was last offered at the strikethrough price on
08-31-2026

$ 107.82 USD
Free Shipping on orders $49 and up
Ensuring your vehicle's peak performance relies on consistent maintenance. BMW's recommended oil change interval varies according to your driving habits. For optimal results, we advise changing the oil every 10,000 miles. However, for more aggressive or city driving, a 5,000-mile oil service interval is the preferred choice. This comprehensive kit includes: 7L of Top Tec 6600 0W-20 Motor Oil Engine Oil Filter with an o-ring Oil Drain Plug with an o-ring Maintain the flawless operation of your BMW with this high-quality service kit from Turner Motorsport.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:24145950
Part#: B48LMTTOSKT
In Stock
Sale - Save 6% $ 104.99

This product was last offered at the strikethrough price on
08-31-2026

$ 98.49 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 104.99

This product was last offered at the strikethrough price on
08-31-2026

$ 98.49 USD
Free Shipping on orders $49 and up
To keep your ultimate driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains: 6L Top Tec 6600 0W-20 Motor Oil Engine Oil Filter with o-ring Oil Drain Plug with o-ring
Show More Show Less

Liqui Moly Top Tec 6600 0W-20 Oil Change Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15744059
Part#: 11428583898-KT
In Stock
Sale - Save 5% $ 113.99

This product was last offered at the strikethrough price on
08-31-2026

$ 107.82 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 113.99

This product was last offered at the strikethrough price on
08-31-2026

$ 107.82 USD
Free Shipping on orders $49 and up
To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. This kit contains: 7L Top Tec 6600 0W-20 Motor Oil Engine Oil Filter with o-ring Oil Drain Plug with o-ring Keep your BMW operating perfectly with this quality service kit
Show More Show Less

Oil Drain Plug
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41188174
Part#: 11137535106TKT
In Stock
Sale - Save 33% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.00 USD
Free Shipping on orders $49 and up
Sale - Save 33%
$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 6.00 USD
Free Shipping on orders $49 and up
Includes a one time use crush washer.
AGA Tools - Corporate Logo
T#:24179137
Part#: AGA-COFK
In Stock
$ 99.99

This product was last offered at the strikethrough price on
08-23-2026

$ 93.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 99.99

This product was last offered at the strikethrough price on
08-23-2026

$ 93.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up

AGA Tools' Clean Oil Funnel Kit is expertly designed to streamline and improve the engine oil-filling process, catering to the needs of both professional auto shops and DIY enthusiasts.


With a set of 13 manufacturer-specific adapters, the kit accommodates a broad spectrum of vehicles, including the latest BMW and Mercedes-Benz models featuring the 1/4 turn style. The kit includes a comprehensive information card that showcases color-coded adapters for easy reference.


The funnel features a generously wide mouth, enabling the spill-free pouring of an entire quart of oil. Designed to adapt to angled valve covers, the kit comes with angled attachments, ensuring compatibility with various configurations. After use, seal the funnel by capping the tip and closing the lid to prevent leaks and the entry of debris.


Additionally, the kit incorporates the Clean Oil Vacuum Regulator adapter (sold separately). Employing the Vacuum Regulator and adapter allows for the installation of AGA's Clean Oil Drain Plug or Adapter Test Block, facilitating a quick and immaculate oil change process.

Show More Show Less

Paradigm Engineering - Corporate Logo
T#:5269543
Part#: OILCAPB58BLACK
Ships in 9 Business Days
$ 99.99 USD
Free Shipping on orders $49 and up
Paradigm Engineering’s B58 oil filter housing cap directly augments your vehicle's oil filtration system and serves as a diagnostic tool. Each B58 oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Nickel plated neodymium rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter and could be an indication of a serious issue within your engine.
Show More Show Less
MMX Performance - Corporate Logo
T#:29035359
Part#: MMR17-1502
Special Order: No Guaranteed ETA
$ 81.99 USD
Free Shipping on orders $49 and up
Get rid of the notorious B58 oil filter disintegration problem forevermore with the MMR Performance Oil Filter. By replacing the factory paper filter element with MMR’s advanced high-flow, high-filtration stainless steel filter unit, you will protect your engine from the big bills (and potentially worse) caused by the OE filter’s collapse failure. The oil filters on BMW’s B58 & B57 3.0 6-cylinder engines (both petrol and diesel) suffer from a well-documented quality problem with the factory paper-element oil filter. At service time, when removal of the filter is attempted, the bottom section frequently breaks away from the disintegrated filtration material. This leaves the broken base stuck in the oil filter housing and an expensive removal/replacement job to extract the remains and fit a new housing. Such is the problem that there’s even an official BMW technical bulletin to warn their dealers of this. The MMR replacement Oil Filter is a pretty special replacement filter. It fixes this annoying problem once and for all. The MMR Oil Filter element is made from a pleated high-flow stainless steel micronic filter cloth – a medical-grade material guaranteed to filter out oil contamination right down to 20 Microns, ensuring far better protection than paper-based filters can achieve. As well as this exceptional filtration, the filter material allows for five times the flow of comparable paper oil filters. Its design provides consistent filtering across entire filter surface. The failure of the factory oil filter generally just leads to a large bill to extract the damaged remnants. However, more worryingly, it has occasionally been known to lead to broken pieces of filter media running through the small oilways and orifices of the engine’s lubrication system, risking blocking the oil running round the bearings and VANOS system and causing much greater mechanical damage before it is caught. The MMR Oil Filter is a reusable unit which can be used over and over again. As long as it is thoroughly cleaned at each oil change, it will last the lifetime of the vehicle and keep on protecting the engine just as it did when new. However, proper cleaning is not necessarily a DIY job, as it requires the use of a suitable solvent to break down the old oil, and cleaning from the inside out with compressed air to remove any risk of debris remaining. If you have any doubts about this, we recommend as best-practice to change filter with every oil-change. The MMR Oil Filter is a lifetime reusable filter. But to resuse and avoid any future loss of filtration or oil flow, it is essential that it is thoroughly cleaned at each oil change as follows: Remove MMR Oil Filter from filter housing Remove 3x O-Rings from MMR Oil Filter prior to Step 3, as fuel will degrade and cause damage to these rubber/Viton components. Soak the filter one of the following fluids for 5-10 minutes – Petrol/Gasoline or Carb Cleaner or Soap and Water Agitate/stir every few minutes until the outer surface is free of any engine debris Dry the filter using compressed air, blow air through the filter, (do not press the compressed air gun against the filter, keep at least a 10mm gap from nozzle to filter) starting from the inside out, then at an angle on the outside of the screen to further remove any remaining particles or cleaning solution. Once dry, reinstall O-Rings (MMR advices replacement of these O-Rings every oil service - See ES4810064) and refit into oil filter housing and engine. If you have any doubt about your ability to perform this sequence, we recommend replacing the filter element with each oil change.
Show More Show Less

Rein Engine Oil Filter Housing Cap CPL0070
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:34181283
Part#: 11427926064
In Stock
$ 25.99 USD
Free Shipping on orders $49 and up

The Engine Oil Filter Housing Cap CPL0070 is a vital component for BMW vehicles, designed to provide a secure and effective seal for the engine oil filter housing. This high-quality cap is essential for maintaining optimal engine performance by preventing oil leaks and ensuring proper oil pressure. Perfect for both professional mechanics and DIY enthusiasts, the Engine Oil Filter Housing Cap CPL0070 is an indispensable part of routine maintenance for BMW owners focused on vehicle longevity.

Crafted from durable materials, this oil filter housing cap is engineered to withstand the demanding conditions typical of BMW engines. Its precise design guarantees an excellent fit, allowing for easy installation and straightforward replacements. Available from Turner Motorsport, this product is a reliable choice for those looking to enhance their engine’s performance.

Key Benefits:

  • Specifically designed for BMW vehicles to ensure compatibility and a perfect fit
  • Prevents oil leaks, helping maintain optimal oil pressure for engine health
  • Made from high-quality materials for enhanced durability and longevity
  • Easy installation process allows for quick maintenance and replacements
  • Ideal for both professional mechanics and DIY car enthusiasts
  • Available from Turner Motorsport, a trusted supplier of BMW parts

The Engine Oil Filter Housing Cap CPL0070 is an essential upgrade for any BMW owner aiming to protect their engine and ensure it runs smoothly.

Show More Show Less

BMW Oil Filter - B46 & B48 2.0L Engine
5X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!
Hengst - Corporate Logo
T#:587279
Part#: 11428575211
In Stock
$ 18.99 USD
Free Shipping on orders $49 and up

Turner Motorsport presents the essential BMW Oil Filter, a crucial component for maintaining a healthy engine. Designed to prevent contaminants from causing premature engine failure, this OEM oil filter ensures optimal performance and longevity for your BMW. Don't compromise with cheap aftermarket replacements; choose the reliability of genuine BMW parts to safeguard your engine from small metal particles and ensure a fresh and vigorous driving experience for years to come.

  • Vital Engine Protection: Safeguards the engine from contaminants for prolonged life.
  • OEM Quality: Genuine BMW oil filter for reliable and consistent performance.
  • Prevents Abrasion: Filters out small metal particles to prevent abrasion and wear.
  • Ensures Longevity: Promotes the longevity of engine components.
  • Maintains Engine Performance: Keeps the engine fresh and full of pep.

Upgrade your BMW's oiling system with the Turner Motorsport BMW Oil Filter.

Show More Show Less
Sunex - Corporate Logo
T#:5269518
Part#: 367132D
Back Ordered
6% off MSRP $ 17.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 17.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping on orders $49 and up
Make oil filter housing removal simple
Mann - Corporate Logo
T#:586857
Part#: 11428575211
In Stock
$ 16.63

This product was last offered at the strikethrough price on
04-09-2026

$ 15.06 USD
Free Shipping on orders $49 and up
$ 15.06 USD
Free Shipping on orders $49 and up

BMW B46 B48 Oil Filter is a crucial component of the oiling system in BMW vehicles. It plays an essential role in protecting the engine by filtering out contaminants that could otherwise cause premature wear and damage.

  • Efficient Contaminant Removal: Captures harmful metal particles and debris, preventing them from damaging engine components.
  • Durable Construction: Designed to last and provide reliable performance, ensuring a clean and efficient engine.
  • High-Quality Replacement: Offers superior filtration compared to generic aftermarket options, maintaining engine health and longevity.
  • Compatibility: Specifically designed for BMW B46 and B48 engines, ensuring a perfect fit and optimal performance.

For optimal engine care, Turner Motorsport recommends using the BMW B46 B48 Oil Filter to keep your engine running smoothly and efficiently.

Show More Show Less


Performance Tool - Corporate Logo
T#:1855973
Part#: W4070
Ships in 2 Business Days
$ 4.99 USD
Free Shipping on orders $49 and up
Molded handles and pour spout.
MMX Performance - Corporate Logo
T#:29035360
Part#: MMR17-0000
Special Order: No Guaranteed ETA
$ 13.99 USD
Free Shipping on orders $49 and up
Genuine MMR Performance O-Ring service kit for the MMX Performance oil filter and billet housing. Does not include MMR oil filter or billet housing, only the four O-Rings needed to service our reusable filter. The MMR Performance oil filter and housing contains four O-Rings within the kit. We recommend you replace the O-Ring set on a regular basis when changing or cleaning the MMR filter, in order to maintain the integrity of the sealing properties it was designed to provide. As it's a direct replacement with the original O-Ring set supplied, it's a very straightforward process to swap and replace. Fitment is limited to the MMR Performance oil filter (MMR17-1502 - See ES4810063) to protect against the notorious B58 oil filter collapse
Show More Show Less
MMX Performance - Corporate Logo
T#:28968889
Part#: MMR03-1601
Special Order: No Guaranteed ETA
$ 127.99 USD
Free Shipping on orders $49 and up