Camshafts for BMW 5 Series G30 (2017+)

Clear BMW chassis

The camshafts are responsible for opening and closing the valves in time with the movement of the pistons. Sometimes the lobes can become worn or scored, necessitating a replacement of the entire shaft. Performance options are also available with more aggressive cam profiles that allow increased lift and duration.

Sort By:

CTA Tools N63/S63 Crankshaft Holder

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:587213

Part#: CTA2893X05

Ships on Jul 21, 2026

$ 72.04 USD

Add to Wish List

Qty

$ 72.04 USD

Add to Wish List

If you have to remove your harmonic balancer pulley, you must secure your crankshaft. This is the exact tool you need Loosens central crankshaft bolt on N63 & S63 engines Services various 2008-2013 BMW Basic Instructions for use: Removal: Remove the engine drive belt. Use the Crankshaft Pulley Holder, to prevent the crankshaft from rotating while loosening the crankshaft balancer bolt. Remove the crankshaft balancer bolt. Discard the bolt. Remove the crankshaft balancer. Install: Install the crankshaft balancer. Install a NEW crankshaft balancer bolt. Use the Crankshaft Pulley Holder to prevent the crankshaft from rotating while tightening the crankshaft balancer bolt. Tighten the bolt to Manufacturer recommended ft. lbs. Install the engine drive belt.

Show More Show Less

Kelford Camshaft Set - Gen 2 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25938642

Part#: KEL-B58-GEN2

Ships in 3 Business Days

Starting at $ 2,394.98 USD

Add to Wish List

Starting at $ 2,394.98 USD

Add to Wish List

BMW B58 Gen2 - Stage 1 Street | Strip | Circuit Race | Road Race | Roll Race | Drift | E85 270° / 268° - 10.30mm / 10.15mm Valve Lift 270°/268° cams to suit BMW's Gen 2 B58 engine with bolt-on intake, exhaust, and turbo upgrades. For an engine producing around 550-750hp running a 58-68mm turbo. Still maintains full use of Valvetronic and Double VANOS for good throttle response and wide power band. Must have valve spring upgrade. BMW B58 Gen2 - Stage 2 Strip | Drag Race | Circuit Race | Road Race | Roll Race | Drift | E85 285° / 280° - 10.30mm / 10.60mm Valve Lift 285°/280° stage 2 racing cams for professionally built BMW Gen 2 B58 engine making 750hp-1000hp. Turbo sizing 62-72mm. Great with aftermarket intake plenums. Still can maintain full use of Valvetronic and Dual VANOS. Can run Valvetronic locked in the fully open position when using an aftermarket throttle body. Must have valve spring upgrade. BMW B58 Gen2 - Stage 3 Strip | Drag Race | Roll Race | Drift | E85 | Methanol 288° / 288° - 10.35mm / 10.80mm Valve Lift 288° Stage 3 drag racing cams for professionally built B58 Gen 2 engines making 1200hp+. Turbo sizing 72mm+ on high boost. Fuel-type ethanol blend or methanol. Must use aftermarket high-flow plenum with a throttle body conversion. Recommend locking the Valvetronic system at 100% swing. Must have valve spring upgrade. High Performance Valve Spring Kit - B58 Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm

Show More Show Less