Springs are the easiest and most cost effective way to improve your handling, get a more aggressive rake, and give your vehicle a more attractive stance. We do recommend replacing your shocks and struts at the same time with either Bilstein or Koni dampers.
Want to give your BMW a more aggressive look and a lower ride? These H&R sport springs will do the trick. The most popular spring in H&R's line-up Sport Springs will lower your vehicle an average of 1.4 inch for a lower center of gravity, which should improve performance. Sport springs feature a spring rate that is firmer than that of the OE Sport spring but is still comfortable enough for daily use. These springs are an excellent choice for those who want to lower their vehicle but still keep it usable. Average lowering of 1.4" Front & 1.3" Rear
Show More Show Less
Front Lowering: -1.4" Rear Lowering: -1.3". Enhance the look of your BMW with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle�s suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle. We recommend installing Bilstein Sport shocks with these lowering springs..
Show More Show Less
Complement the Performance Spring Set from Dinan with this handling kit. This handling kit was designed to improve the overall ride quality while reaping the benefits of lowering springs. This includes tuned, progressive rate bump stops that maximize suspension travel. It offers the best of both worlds, tight, rigid handling on corners while still smooth and comfortable on the highway and over bumps. You will experience substantially less body roll, as well as less dive under hard braking with these stiffer springs.
Show More Show Less
Dinan's Performance Spring set for the G30 540i (RWD) provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the 540i by a 7/8" in the front and rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot-peened for stress relief to last the life of the car. The 15% increase in stiffness will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip, for high-speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at speeds as low as 20 mph, up to the top speed of the vehicle.
Show More Show Less
This aluminum spring seat fits between upper and lower 60mm springs to "join" them together. Typically you would have a main spring on top and a tender or helper spring on the bottom (or vice-versa). The spring joiner, or locator ring, fits between the springs with a retaining lip on the inside. We like this design better than an outside spring joiner because it's lighter and there's no material sitting on the outside where a tire might come in contact with it. These are priced per each. Show More Show Less
Improve your handling and ride with the Performance Spring Set from Dinan. This spring set was designed on the road, with track use in mind. It offers the best of both worlds, tight, rigid handling on corners while still smooth and comfortable on the highway and over bumps. You will experience substantially less body roll, as well as less dive under hard braking with these stiffer springs.
Show More Show Less
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less
These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
Show More Show Less
Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go-to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders, the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience. Includes Dinan Exhaust Dinan Intake Dinan Adjustable Lowering Springs Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +19 HP and +18 lb-ft of torque (Exhaust + Intake) Smoother, louder, and sportier sound (Exhaust + X-Pipe) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonators between the catalysts and rear muffler for increased volume (X-Pipe) Reduced intake restriction for greater flow allowing increased turbo efficiency and greater power potential on modified builds (Intake) Improved throttle response (Intake) Vehicle lowered 3/4" in the front and rear while retaining factory-like ride comfort (Springs + Bumpstops) Substantial reduction in body roll for improved handling and performance (Springs + Bumpstops) Elevated and stylish high-performance look to the interior (Pedal Pads) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge
Show More Show Less
