Oiling System for BMW G42 M240i xDrive B58 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Tasked with keeping everything properly lubricated, the oiling system is one of the most if not THE most fundamental parts of the engine. Make sure that everything is in good working order and flowing properly to ensure your engine has a long and trouble-free service life.

Sub-Categories

Sort By:

B58TU / B48TU One Way Crankcase Breather - G Chassis
2X Entries Into Our F80 M3 Sweepstakes
For models with the Gen2 B58 or B48 engines only (B58TU / B48TU)
Vargas Turbo Technologies - Corporate Logo
T#:25606657
Part#: VTTB58BREATHERTU
In Stock
$ 128.99 USD
Free Shipping
$ 128.99 USD
Free Shipping
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51813315
Part#: VTT-TI-DRAIN
Ships in 7 Business Days
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.
Mishimoto Universal 10 Row Oil Cooler
For custom applications only. Not a direct bolt on.
Mishimoto - Corporate Logo
T#:378421
Part#: MMOCU
In Stock
$ 410.99 USD
Free Shipping
$ 410.99 USD
Free Shipping
This universal oil cooler from Mishimoto is far superior to the factory unit with its 11" x 2.76" x 1.97" core. Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes 4 feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Mishimoto Automotive is a leading manufacturer of aftermarket performance cooling products. The company was established back in 2003 with one goal. That goal was to provide customers with quality cooling system upgrades that work on the track and on the road. At Mishimoto, you never have to worry about the quality of the product you are installing. This kit is universal and is not a direct bolt on. *For custom applications only. Not a direct bolt on. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less

Mishimoto - Corporate Logo
T#:23020165
Part#: MMBCC-CBTWO
In Stock
$ 160.99 USD
Free Shipping on orders $49 and up

Optimize your vehicle's performance and shield crucial components with the Mishimoto Compact 2-Port Baffled Oil Catch Can. This innovative solution effectively separates oil particles from PCV/CCV air using a 50-micron bronze filter, ensuring defense against oil blow-by for your intercooler, intake system, and vital parts. Constructed with a patented billet 6061 aluminum can sealed with Viton™ O-Rings, this catch can guarantees both durability and effectiveness.

Equipped with a universal mounting bracket, it allows adaptable installation and comes complete with two CNC-machined aluminum 1/2" barbed hose fittings. With an enhanced 3 oz internal capacity, service intervals are prolonged, while its fully serviceable filter and can ensure enduring functionality.

Engineered for safety in pressurized applications, the internal air diverter enhances oil separation by amplifying air turbulence. Available in black, red, or polished finishes, this catch can preserves proper octane levels, reducing potential detonation and promoting extended engine life.

The product package includes the Compact 2-Port Baffled Oil Catch Can, two Aluminum 1/2" Barbed Fittings, and a Universal Mounting Bracket, all backed by the Mishimoto Lifetime Warranty.

WARNING! Prop 65 may apply to this product.

Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California.

Prop 65 mandates listing any chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.

For more information about California Prop 65 warning, visit: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto 19 Row Universal Oil Cooler
For custom applications only. Not a direct bolt on.
Mishimoto - Corporate Logo
T#:378414
Part#: MMOCUL
In Stock at Vendor
$ 536.99 USD
Free Shipping
$ 536.99 USD
Free Shipping
Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:21209809
Part#: ATK-BM-0008-G42-
Ships in 7 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time! Dry carbon fiber is formed using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. On top of that they coat this product in a UV resistant coating extending the life of this cap significantly! Don't wait and get yours today! You will not be disappointed by the fit and finish!
Show More Show Less

VTT Billet Oil Cap Crankcase Vent Adapter - Screw In - BMW S58, B58TU...
For vehicles with VTT Billet & Cast Valve Covers
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:52270290
Part#: OC16OADAPSC
Ships in 10 Business Days
New Item
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping
Engineered for those who demand total control over their PCV system, the VTT Screw-In Oil Cap Adapter provides a robust solution for crankcase ventilation.
Vargas Billet Oil Drain Adapter - -10AN Male - BMW B58
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:52094563
Part#: VTT-FAB-040-AN
Ships in 10 Business Days
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT-FAB-040 is a high-performance billet aluminum adapter flange specifically engineered for the BMW B58 engine platform.

VTT -6 Dual Drain Valves - VTT Modular Catch Cans with -6 ORB bottom ...
For vehicles with VTT Modular PCV/Catch Can Systems
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:52270288
Part#: OCC1DUADRAVAL
Ships in 10 Business Days
New Item
$ 53.99 USD
Free Shipping
$ 53.99 USD
Free Shipping
Upgrade your engine bay’s efficiency with the Vargas Turbo Technologies -6 Dual Drain Valve system.