As time goes on steel and rubber fuel lines tend to degrade and fall apart. If you see rust starting to form or rubber lines cracking, replace them to prevent a roadside failure.
The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.
Show More Show Less
The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 3/8" (9.49mm) quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.
Show More Show Less
The Precision Raceworks AN6 Male Flare/ORB to 5/16" (7.89mm) Female Quick Connect is a premium component designed for fluid or fuel systems. The AN6 male flare/ORB fitting ensures a secure connection, while the 5/16" (7.89mm) female quick-connect fitting allows for fast, tool-free disconnection and reconnection. This setup guarantees a reliable, leak-proof seal, ideal for high-performance systems. Would you like assistance sourcing this fitting or other Precision Raceworks components?
Show More Show Less
The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!
Show More Show Less
The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!
Show More Show Less
Perfect for upgrading or modifying your fuel delivery system, it offers effortless installation and long-lasting reliability in performance-driven builds
This fitting allows you to terminate an AN-6 PTFE fuel line with a secure, leak-free 9.89mm male quick-connect, making it an ideal solution for upgrading or modifying fuel delivery systems in high-horsepower, E85, and race-fuel applications.
Show More Show Less
This setup involves a PTFE AN6 fitting that connects to a 7.89mm male quick-connect (QC) fitting, commonly used in fuel or fluid systems. The PTFE hose offers excellent durability, with resistance to chemicals, heat, and pressure. The AN6 fitting ensures a secure connection, while the 7.89mm male QC fitting allows for fast, tool-free connections and disconnections. When choosing this fitting, ensure it's compatible with both your PTFE hose and system. Need help finding the right components?
Show More Show Less
The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!
Show More Show Less
The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!
Show More Show Less
The Precision Raceworks PTFE Fuel Line Fitting 180-Degree AN-6 Female Flare is a high-quality component engineered for optimal fuel system routing. Its 180-degree design enables smooth, compact hose placement in confined spaces. The AN-6 female flare connection ensures a tight, leak-proof seal, while its PTFE compatibility offers superior resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.
Show More Show Less
The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!
Show More Show Less
Upgrade your fuel system with this Fuel line fitting TEE featuring AN-6 Male threads on all three ends, and enjoy a high-flow, race-ready solution built for maximum performance and reliability.
Upgrade your fluid system with a reliable, Precision Raceworks AN-6 PTFE fitting to AN-6 ORB, designed for maximum efficiency and ease of installation.
The Precision Raceworks PTFE AN6 Fitting to 3/8" Female QC with a 1/8" NPT port is a premium component designed for fuel and fluid systems. The AN6 fitting securely connects to a PTFE hose, offering exceptional resistance to heat, pressure, and chemicals. The 3/8" female quick-connect fitting enables fast, tool-free disconnections and reconnections, while the 1/8" NPT port allows for additional connections, such as sensors or pressure gauges.
Show More Show Less
The Precision Raceworks PTFE to AN-6 Female Flare Fuel Line Fitting is designed for high-performance fuel systems. Constructed from durable PTFE material, it ensures compatibility with various automotive applications. This universal fitting is suitable for numerous vehicle platforms, providing flexibility in fuel line routing. Features: AN-6 Compatibility: Designed to connect PTFE fuel lines to AN-6 female flare fittings, ensuring a secure and leak-free connection. Durable Construction: Made from high-quality PTFE material, offering resistance to fuel additives and high temperatures. Universal Fitment: Suitable for a wide range of vehicles, providing flexibility in fuel line routing. High-Performance Design: Engineered to meet the demands of high-performance fuel systems, ensuring reliable fuel delivery. For more information, visit the product page on Precision Raceworks' website.
Show More Show Less
Enhance your fuel system with the Precision Raceworks 90-degree double quick connect, and experience the convenience of professional-grade fittings designed for high-performance applications.
The Precision Raceworks AN6 Male Flare/ORB to 3/8" Female Quick Connect is a premium fitting designed for fluid and fuel systems. The AN6 male flare/ORB fitting ensures a secure, leak-proof connection with an O-ring boss design. The 3/8" female quick-connect fitting enables fast, tool-free disconnections and reconnections, making it perfect for high-performance setups that require both reliability and quick access.
Show More Show Less
The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!
Show More Show Less
Whether upgrading your fuel system for performance or simply eliminating unnecessary components, this fitting provides an efficient and reliable way to enhance your fuel delivery setup by removing your ethanol sensor
Show More Show Less
The AN-6 PTFE 90-Degree Fitting to 9.89mm Female Quick Connect features a durable air-hose-style quick-release for secure, corrosion resistant coating and a leak-free connection for high-performance applications.
Show More Show Less
Whether you're modifying your fuel lines for increased horsepower, adding a secondary fuel system, or upgrading to a more efficient setup, this 45-degree plug-and-play PTFE fitting delivers unmatched performance, easy installation, and rock-solid reliability.
Show More Show Less
Use this fuel line kit to replace the OEM flex line from the fender to the HPFP and add an AN6 tee for adding Port Injection. Port Injection Line included
The Precision Raceworks PTFE Fuel Line Fitting 135-Degree AN-6 Female Flare is a premium component designed for optimal fuel system routing. Its 135-degree angle enhances flexibility and provides better clearance in confined spaces. The AN-6 female flare connection ensures a secure, leak-proof fit, while its PTFE compatibility offers exceptional resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.
Show More Show Less
he Precision Raceworks PTFE Fuel Line Fitting is a 180-degree AN-6 female flare fitting designed for high-performance fuel systems.onstructed from durable PTFE material, it ensures compatibility with various automotive applications.his universal fitting is suitable for numerous vehicle platforms, providing flexibility in fuel line routing. *Features:** **AN-6 Compatibility:** Designed to connect AN-6 male flare fittings to AN-6 female flare fittings at a 180-degree angle. **Durable Construction:** Made from high-quality PTFE material for enhanced durability and resistance to fuel additives. **Universal Fitment:** Suitable for a wide range of vehicle platforms, offering flexibility in fuel line routing. **High-Performance Design:** Engineered to meet the demands of high-performance fuel systems, ensuring reliable fuel delivery. or more information, visit the product page:citeturn0search0
Show More Show Less
The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!
Show More Show Less
Vise jaws for AN fittings are essential tools that securely hold AN fittings during assembly or disassembly. Made from soft aluminum or plastic, they prevent damage by firmly gripping the fittings without scratching or marring the surface. These jaws help preserve the integrity of threads and sealing surfaces, ensuring leak-proof and reliable connections in fuel or fluid systems.
Show More Show Less
The AN-6 PTFE 90-Degree Fitting to 9.89mm Female Quick Connect is designed for seamless fuel system integration, featuring a durable air-hose-style quick-release for secure, leak-free connections in high-performance applications.
Show More Show Less
The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!
Show More Show Less
Engineered for seamless fuel system integration, this precision-machined 90-degree fitting is designed with a 7.89mm female quick connect on one end and a 9.89mm female quick connect on the other. Built for maximum convenience, it features an air hose-style quick connect system, ensuring effortless, secure connections without the need for special tools.
Show More Show Less
Replacement ferrules, also known as olives, are vital components for assembling PTFE fuel lines. These one-time-use metal ferrules are crimped onto the PTFE tube to form a secure, leak-proof connection with the fitting. Once crimped, they can leak if the fitting is loosened or removed. For high-performance fuel systems, Precision Raceworks provides replacement ferrules designed for PTFE fittings. These ferrules are engineered to deliver a reliable seal and preserve the integrity of your fuel line connections. When selecting replacement ferrules, it’s important to choose ones that are compatible with your specific PTFE hose and fittings to ensure maximum performance and safety.
Show More Show Less
A PTFE AN6 fitting to male AN6 flare is commonly used in fuel or fluid systems. The PTFE AN6 fitting ensures a secure connection to a PTFE hose, offering superior resistance to heat, pressure, and chemicals. The male AN6 flare fitting provides a tight, leak-proof seal, ideal for high-performance applications that require dependable, durable connections.
Show More Show Less
The Precision Raceworks PTFE AN6 fitting to male AN6 ORB is a premium component designed for high-performance fuel and fluid systems. The PTFE AN6 fitting provides a secure connection to a PTFE hose, offering superior durability and resistance to heat, pressure, and chemicals. The male AN6 ORB fitting features an O-ring boss design, guaranteeing a leak-proof, reliable connection in demanding applications.
Show More Show Less
The AN-6 GTFE 90-Degree Fitting to AN-6 Female Flare is a premium-grade, precision-machined adapter crafted for effortless fuel system compatibility and optimal performance.
The Precision Raceworks AN6 Female to AN6 Female Adapter is a durable fitting designed to join two AN6 fittings with female threads. It ensures a secure, leak-proof connection, making it perfect for fluid and fuel systems where a smooth, reliable link is needed. This adapter is commonly used to extend hose lengths or adjust configurations while keeping the same AN6 size.
Show More Show Less
The Precision Raceworks PTFE AN6 Fitting to 7.89mm (5/16") Female Quick Connect is a 90-degree fitting designed to connect your PTFE AN-6 fuel line to a 5/16" female quick connect. It features an air-hose style quick connect for easy connections. This fitting is compatible with various automotive applications, providing flexibility in fuel line routing.
Show More Show Less
Upgrade your fuel system with the Precision Raceworks 90-degree fitting, and experience the convenience of air hose-style quick connects for efficient and easy-to-manage fuel system setups.
The Precision Raceworks G2x/G8x Performance AN6 Fuel line upgrade options are a direct replacement from the fuel pump in the fuel tank to the metal hard line under near the firewall. Featuring smooth bore PTFE protected by stainless steel and nylon, and 100% billet fittings, these lines are a nice touch of quality to add to any build.
Show More Show Less
The Precision Raceworks AN6 Male Check Valve is the ultimate solution to ensure optimal fuel system performance. Designed to prevent fuel from draining from your lines, this check valve is the perfect addition to your high-performance fuel system. Constructed from premium billet aluminum, featuring an anodized finish and Viton O-rings, this check valve is built to withstand the rigors of high-performance applications and E85. The piston-style design, with a spring to keep the piston in place, ensures that no fuel will drain from your lines, maintaining consistent fuel pressure and preventing unwanted fuel loss.
Show More Show Less
The Precision Raceworks G2x/G8x Performance AN6 Fuel line upgrade options are a direct replacement from the fuel pump in the fuel tank to the metal hard line near the firewall. Featuring smooth bore PTFE protected by stainless steel and nylon, and 100% billet fittings, these lines are a nice touch of quality to add to any build. Additionally, this kit is modular in design to work with our USA-made 10 micron micro-glass fuel filter option. This option protects your injectors and high-pressure fuel pump. This line set is a MUST for anyone running an upgraded primary fuel pump of any brand, as currently no other company is filtering the fuel, which will lead to premature failure of the high-pressure pump and fuel injectors! Best of all, micro-glass is the ideal filtration material for both E85 and Gas (including race fuels).
Show More Show Less
The Precision Raceworks S58 Port Injection kit with stock manifold compatibility is exactly what the new G80 M3 and G82 M4 guys have been waiting for! Safely add fuel to your S58 engine and get ready to hold on! This kit is capable of providing supplemental fueling to all BMWs equipped with the S58 engine so that you can push the limits without the need to purchase an expensive custom manifold. This kit integrates seamlessly into your car, including everything needed to add multi-port injection, and is 100% E85 compatible. Precision Racework's port injection kit is available without injectors, allowing you to source your preferred injectors, or with genuine Bosch Motorsport injectors that have been modified and flow matched with a detailed certificate included, providing the flow data needed for optimal tuning. Precision Raceworks' port injection kit features an AN6 fuel rail to maintain high fuel flow and pressure. Built-in locks secure each injector to the fuel rail, preventing potential failure and allowing the rail to be removed without excessive fuel spillage. This kit comes complete from Precision Raceworks, requiring no additional fuel lines, seals, or fittings. The included smooth-bore PTFE fuel lines offer years of service under extreme conditions and are compatible with all fuels. Simply pick up this kit and pair it with your favorite injector controller!
Show More Show Less
