BMW Tools & Specialty Equipment for BMW G80 M3 S58 3.0L

*Features a total lift height of almost 29 inches!*

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK13HLQ Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

• Very low minimum height of only 3.15 in
• Wide and robust frame made of high-strength steel
• Fitted with quick-lift pedal for easy reach of lifting point
• Precise and safe control whilst lowering
• Manual dead man’s release for optimum safety when lowering
• Built-in safety overload valve
• Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
• Ergonomically designed handle ensuring positive and safe operation

Specifications:

• Capacity:  2900 lb 
• Min. height:  3.15 in 
• Max. height:  28.94 in 
• Frame length:  37.01 in 
• Handle length:  37.40 in 
• Frame height:  6.30 in 
• Width:  18.90 in 
• Weight:  86 lb

AGA Tools' Clean Oil Funnel Kit is expertly designed to streamline and improve the engine oil-filling process, catering to the needs of both professional auto shops and DIY enthusiasts.

With a set of 13 manufacturer-specific adapters, the kit accommodates a broad spectrum of vehicles, including the latest BMW and Mercedes-Benz models featuring the 1/4 turn style. The kit includes a comprehensive information card that showcases color-coded adapters for easy reference.

The funnel features a generously wide mouth, enabling the spill-free pouring of an entire quart of oil. Designed to adapt to angled valve covers, the kit comes with angled attachments, ensuring compatibility with various configurations. After use, seal the funnel by capping the tip and closing the lid to prevent leaks and the entry of debris.

Additionally, the kit incorporates the Clean Oil Vacuum Regulator adapter (sold separately). Employing the Vacuum Regulator and adapter allows for the installation of AGA's Clean Oil Drain Plug or Adapter Test Block, facilitating a quick and immaculate oil change process.

Drive Click Style Inch/Lbs Torque Wrench 3/8" 25-250 In/Lbs offers precise and reliable torque measurement for various applications. This high-quality torque wrench features a 3/8" drive head and measures torque from 25 to 250 inch-pounds, making it ideal for both professional and DIY use. The wrench is designed with a precision 45-tooth ratchet head that provides accurate torque control and an audible click to signal when the desired torque is reached. Its impact-resistant handle ensures durability, and it includes a case for convenient storage.

• Measures torque from 25-250 inch-pounds for versatile use
• Precision control with a 45-tooth ratchet head
• Audible click indicates when the desired torque is achieved
• Both clockwise and counterclockwise operation
• Durable, impact-resistant handle and includes a storage case

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

• Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
• Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
• Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
• Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 12" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

Harmonic Balancer Puller and Installer Set

The Harmonic Balancer Puller and Installer Set is an essential tool kit designed for the effective removal and installation of harmonic balancers. This master set includes all the necessary bolts and adapters required for a wide range of applications, making it a versatile addition to any workshop or toolbox.

Benefits:

• Comprehensive Set: Includes all required bolts and adapters for most applications, ensuring compatibility with various vehicle models.
• Bilingual Instructions: Comes with bilingual instructions for easy use and understanding, catering to a broader range of users.
• Replacement Part Availability: Replacement parts are readily available, ensuring the tool kit remains functional and useful over time.
• Efficient Performance: Streamlines the process of removing and installing harmonic balancers, saving time and effort.
• Durable Construction: Built from high-quality materials for long-lasting durability and reliable performance.