BMW Intake Parts for BMW G80 M3 S58 3.0L

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:
Mishimoto Performance Charge Pipe Kit - G8X M3/M4
Mishimoto Performance Charge Pipe Kit - G8X M3/M4
Mishimoto - Corporate Logo
T#:16441588
Part#: MMICP-G80-21
In Stock
$ 764.99 USD
Add to Wish List
$ 764.99 USD
Add to Wish List
The Mishimoto G8X M3/M4 performance charge pipe replaces the stock rubber and plastic with robust silicone and cast aluminum for a charge pipe that's stronger and 27% less restrictive than stock. Our charge pipe retains the flexibility of the stock front section but replaces the stock rubber hoses with durable silicone for greater heat and pressure tolerance. The plastic merge has been replaced with cast aluminum for a significant durability upgrade, while the transitions have been smoothed to allow improved flow to support future performance upgrades. This performance charge pipe is a direct fit for your 2021+ BMW G8X M3/M4 and is backed by our Mishimoto Lifetime Warranty for a lifetime of letting your legend breathe free. So, if you're ready to unleash the limitless potential of your M3 or M4, this Mishimoto performance charge pipe is for you. This kit includes: (2) Aluminum Charge Pipes (2) CNC Adapters (1) Aluminum Spacer (5) Rubber Grommets (3) Silicone Couplers (6) High-Torque Worm Gear Clamps Mounting Hardware Installations Instructions HERE
Show More Show Less
Mishimoto Performance Heat Exchanger - Automatic Transmission - BMW G8X M3/M4 (Automatic)
Mishimoto Performance Heat Exchanger - Automatic Transmission - BMW G...
Mishimoto - Corporate Logo
T#:21209832
Part#: MMHE-G80-21AT
In Stock
$ 752.99 USD
Add to Wish List
$ 752.99 USD
Add to Wish List
Introducing the Mishimoto 2021+ BMW G8X M3/M4 performance heat exchanger, the ultimate solution to keep your charge air cool under the most demanding conditions. In the world of forced induction vehicles, air-to-water intercooling is the future, and Mishimoto are taking it to the next level. We started from scratch, leaving no room for compromise. Our design eliminates all plastic components, replacing them with durable aluminum end tanks, core, and CNC-machined ports. TIG-welded for maximum strength and longevity, this heat exchanger will withstand even the harshest conditions. We took it further by incorporating strutted tubes within the core, adding unparalleled resistance against bowing and flexing during aggressive cornering. But strength is not our only focus. We've increased the core volume by 23 percent and expanded the external fin surface area by 44 percent. Combined with our dual-pass flow configuration and louvered fin design, this performance heat exchanger vastly improves cooling capacity over stock, enhancing overall performance. Rest assured, the Mishimoto Performance Heat Exchanger for the 2021+ BMW G8X M3/M4 is designed to fit perfectly with all other factory components, ensuring seamless integration into your vehicle. For added protection, we include steel rock guards to shield the heat exchanger from debris and prevent punctured tubes or crushed fins. The Mishimoto G8X M3/M4 performance heat exchanger fits both automatic and manual transmissions. The Mishimoto 2021+ BMW G8X M3/M4 performance heat exchanger comes with our renowned Mishimoto Lifetime Warranty, giving you peace of mind and confidence in your investment. Upgrade your BMW G8X M3/M4 with the Mishimoto Heat Exchanger and experience the true power of cooling efficiency. Features: Direct fit for the 2021+ BMW G8X M3/M4 23 percent increase in core volume improves cooling capacity 44 percent increase in external fin surface area for greater heat transfer Dual-pass design for maximum cooling Strutted tubes incorporated in core for maximum durability CNC-machined inlet and outlet for leak-free running Includes removable steel rock guards for additional durability Mishimoto Lifetime Warranty Includes: (1) Performance Aluminum Heat Exchanger (1) Upper Rock Guard (1) Lower Rock Guard (MT Only) (1) Hardware Pack Mishimoto Lifetime Warranty
Show More Show Less
Mishimoto Performance Intake - G80 G82
Mishimoto Performance Intake - G80 G82
Mishimoto - Corporate Logo
T#:5608771
Part#: MMAI-G80-21
In Stock at Vendor
$ 952.99 USD
Add to Wish List
$ 952.99 USD
Add to Wish List
The M3 has undergone significant evolution over the years, with each new iteration bringing something new to the table. From the brilliant widebody E30 of the eighties to the exotic sounding V8-powered E9X, each generation has its own identity but holds true to the goals of providing an amazing driving experience. The G8X gets one of the most potent engines produced by BMW to date, the S58B30, along with an option for AWD. Enhancing the S58 was something Mishimoto set their sights on soon after acquiring a G80 of their own, the first project being a performance air intake system. Features: Direct fit for 2021+ BMW G8X M3/M4 with 3.0L S58B30 Reduces intake restriction by up to 22.8% for more power potential Provides safe operation on a stock ECU tune Aggressive intake tone under acceleration Additional fresh air ducts draw cool air from wheel wells Amplifies turbocharger spool and bypass valve venting Rotational-molded airboxes and intake tubes provide optimal airflow, outstanding rigidity, and maximum heat-soak resistance CNC-machined aluminum connectors for maximum durability and a leak-free install Precision-engineered using the latest in 3D printing, CAD modeling, and flow bench technology CNC-Machined passenger-side turbo inlet improves flow and durability Installs in less than 1 hour with no need to remove the front bumper or undertray Airbox volume, shape, and construction material all play a part in delivering maximum airflow to your engine. Our engineering team created extremely precise rotational-molded thermoplastic airboxes that eliminate restrictions, supply maximum cool-air entry via two additional ports that open to the wheel wells, and improve engine bay aesthetics. The use of thermoplastic material ensures the air intake system will incur minimum engine bay heat soak and provides unmatched durability for years of service in the harshest environments. Our airboxes were designed using the latest in 3D printing, CAD modeling, and flow bench technology. As a result, we reduced air intake restriction by 13% on the driver-side intake tract and 22.8% on the passenger-side intake tract. For proper filtration, this kit includes dual high-flow oiled air filters which provide improved filter surface area and improved airflow over the stock panel filters. In addition to the flow benefits, our intake system provides a significant amplification of turbocharger spool and bypass valve venting. These enhanced sounds provide a new level of enjoyment, adding to the incredible driving experience you expect from a BMW M-Series. The Mishimoto 2021+ BMW G8X M3/M4 Performance Intake is a complete bolt-on kit and includes all necessary components for an easy installation. As with all Mishimoto products, this performance intake kit includes our signature Mishimoto Lifetime Warranty. Intake kit includes: (1) Driver-Side Intake Airbox Assembly (1) Driver-Side Air Filter, Oiled (1) Driver-Side Intake Tube Grommet (1) Driver-Side Intake Tube Coupler (1) Driver-Side CNC Quick-Disconnect Fitting (1) Passenger-Side Intake Airbox Assembly (1) Passenger-Side Air Filter, Oiled (1) Passenger-Side Intake Tube Grommet (1) Passenger-Side Intake Tube Coupler (1) Passenger-Side Aluminum Turbocharger Outlet (5) CNC-Machined Airbox Peg Kits (4) Stainless Steel Worm Gear Clamps Hardware Kit WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Mishimoto Performance Intercooler - Black
Mishimoto Performance Intercooler - Black
Mishimoto - Corporate Logo
T#:17538755
Part#: MMINT-G80-21BK
In Stock at Vendor
1% off MSRP $ 3,575.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,549.99 USD
Add to Wish List
1% off MSRP
$ 3,575.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,549.99 USD
Add to Wish List
Mishimoto Silicone Transition Coupler - 3in. To 3.5in. - Black
Mishimoto Silicone Transition Coupler - 3in. To 3.5in. - Black ...
Mishimoto - Corporate Logo
T#:25241773
Part#: MMCP-3035B
In Stock
$ 11.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 11.99 USD
Free Shipping on orders $49 and up
Add to Wish List
This transition coupler is constructed of high-quality heat resistant silicone, making it useful for fitting air intakes, intercooler piping, and more.
Mishimoto Performance Heat Exchanger - Manual Transmission - BMW G8X M3/M4 (Manual)
Mishimoto Performance Heat Exchanger - Manual Transmission - BMW G8X ...
Mishimoto - Corporate Logo
T#:21209833
Part#: MMHE-G80-21MT
In Stock at Vendor
$ 810.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 810.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Introducing the Mishimoto 2021+ BMW G8X M3/M4 performance heat exchanger, the ultimate solution to keep your charge air cool under the most demanding conditions. In the world of forced induction vehicles, air-to-water intercooling is the future, and Mishimoto are taking it to the next level. We started from scratch, leaving no room for compromise. Our design eliminates all plastic components, replacing them with durable aluminum end tanks, core, and CNC-machined ports. TIG-welded for maximum strength and longevity, this heat exchanger will withstand even the harshest conditions. We took it further by incorporating strutted tubes within the core, adding unparalleled resistance against bowing and flexing during aggressive cornering. But strength is not our only focus. We've increased the core volume by 23 percent and expanded the external fin surface area by 44 percent. Combined with our dual-pass flow configuration and louvered fin design, this performance heat exchanger vastly improves cooling capacity over stock, enhancing overall performance. Rest assured, the Mishimoto Performance Heat Exchanger for the 2021+ BMW G8X M3/M4 is designed to fit perfectly with all other factory components, ensuring seamless integration into your vehicle. For added protection, we include steel rock guards to shield the heat exchanger from debris and prevent punctured tubes or crushed fins. The Mishimoto G8X M3/M4 performance heat exchanger fits both automatic and manual transmissions. The Mishimoto 2021+ BMW G8X M3/M4 performance heat exchanger comes with our renowned Mishimoto Lifetime Warranty, giving you peace of mind and confidence in your investment. Upgrade your BMW G8X M3/M4 with the Mishimoto Heat Exchanger and experience the true power of cooling efficiency. Features: Direct fit for the 2021+ BMW G8X M3/M4 23 percent increase in core volume improves cooling capacity 44 percent increase in external fin surface area for greater heat transfer Dual-pass design for maximum cooling Strutted tubes incorporated in core for maximum durability CNC-machined inlet and outlet for leak-free running Includes removable steel rock guards for additional durability Mishimoto Lifetime Warranty Includes: (1) Performance Aluminum Heat Exchanger (1) Upper Rock Guard (1) Lower Rock Guard (MT Only) (1) Hardware Pack Mishimoto Lifetime Warranty
Show More Show Less
Mishimoto Performance Intake - Carbon Fiber, Matte BMW G8X M2/M3/M4
Mishimoto Performance Intake - Carbon Fiber, Matte BMW G8X M2/M3/M4 ...
Mishimoto - Corporate Logo
T#:51039981
Part#: MMAI-G80-21CFM
EO#: D-759-13
Ships in 3 Business Days
New Item
$ 2,617.00 USD
Add to Wish List
$ 2,617.00 USD
Add to Wish List
The Mishimoto Carbon Fiber Intake is a comprehensive "bolt-on" upgrade that balances show-quality aesthetics with rugged durability.
Mishimoto Open Airbox Performance Intake - BMW G8X M3/M4
Mishimoto Open Airbox Performance Intake - BMW G8X M3/M4
Mishimoto - Corporate Logo
T#:51039999
Part#: MMAI-G80-21H
Ships in 3 Business Days
New Item
$ 815.99 USD
Add to Wish List
$ 815.99 USD
Add to Wish List
Designed for maximum durability and ease of installation in the G8X engine bay.
AEM V3 Universal Water/Methanol Injection Kit (30-3300)
AEM V3 Universal Water/Methanol Injection Kit (30-3300)
AEM Electronics - Corporate Logo
T#:369781
Part#: 30-3000
In Stock
11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
Add to Wish List
11% off MSRP
$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
Add to Wish List
Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing
Show More Show Less
AEM V3 Water/Methanol Injector Kit (Qty 2)
AEM V3 Water/Methanol Injector Kit (Qty 2)
AEM Electronics - Corporate Logo
T#:20815166
Part#: 30-3313
In Stock
12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
Add to Wish List
12% off MSRP
$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
Add to Wish List
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.
Show More Show Less
V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max
V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...
AEM Electronics - Corporate Logo
T#:590418
Part#: 30-3304
In Stock at Vendor
11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
Add to Wish List
11% off MSRP
$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
Add to Wish List

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

  • Enhances performance and efficiency for BMW and MINI vehicles
  • Maximizes power output while ensuring engine safety
  • Internal MAP sensor for precise control
  • 35PSI maximum pressure capacity for reliability
  • Improves horsepower, torque, and fuel economy
Show More Show Less
AEM Water/Methanol Injection System
AEM Water/Methanol Injection System
AEM Electronics - Corporate Logo
T#:20815164
Part#: 30-3326
In Stock at Vendor
11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
Add to Wish List
11% off MSRP
$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
Add to Wish List
AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Special Offers

Shipping