Home
Intake

BMW Intake Parts for BMW G80 M3 S58 3.0L

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

Turner Gloss Carbon Fiber Cold Air Intake - G80 G82 G87 M2/M3/M4 S58 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13036529

Part#: 013859LA10

In Stock

Sale - Save 3% $ 2,042.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,981.70 USD

Add to Wish List

Qty

Sale - Save 3%

$ 2,042.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,981.70 USD

Add to Wish List

At Turner, all our Carbon Fiber Intake Systems are top-of-the-line custom-engineered products that we develop in house. Our G8x Intake is no exception. Turner Carbon Fiber Intakes start with a 3D scan of the factory intake and engine bay. Our engineers use these 3D images of the chassis to design the intake in SolidWorks modeling software. Using a Flow Bench, our Intake is then airflow tested against the factory intake, to ensure optimal airflow improvement against stock. The final product is a beautiful and functional Carbon Fiber Intake, CAD designed for perfect integration with the OEM inlet ducting and stock mounting locations and proven to flow better than factory.

Our G8x carbon fiber airbox sport entirely carbon fiber construction, with a removable carbon fiber lid for easy air filter access. Our enclosed carbon fiber intake systems are also proven to lower intake temps vs. open filter intakes. Plus, they further enhance the appearance of the engine bay, by adding more beautiful carbon fiber. The carbon airbox and lid is manufactured using 2X2 twill weave carbon fiber and protected with a gloss finish clear coat for UV resistance. The Best part? The airbox mount in the stock location with all supplied hardware included.

The oval intake tube design matches the OE look, allowing the intake to be used with the factory structural brackets that the intake goes through. However, the cross-sectional area of the Turner Carbon Fiber intake tube is greater than the stock intake tube, with a smooth interior for even better flow. The carbon intake tube is manufactured using 2X2 twill weave carbon fiber, and the intake tube is protected by a gloss finish clear coat for UV protection.

With the oval design of the intake tube, the custom air filter had to be designed for this intake system. The air filter is specially designed to seal against the carbon fiber airbox, eliminating any opening for hot air to enter the airbox! We created a conical hi-flow reusable air filter; featuring 8 ply oiled cotton gauze construction to maximize filtration efficiency. This filter features a Bellmouth (velocity stack) filter flange inlet to reduce turbulence in order to maximize flow.

Overall, the less restrictive intake design allows for more flow to the engine. The Drivers side Stock intake flows 336.2 CFM @ -15 inH20. The Drivers side Turner intake flows 374.3 CFM @ -15 inH20. This is about a 12% increase over stock The Passenger side stock intake flows 274.2 CFM @ -15 inH20.The Passenger side Turner intake flows 296.3 CFM @ -15 inH20. This is about an 8% increase over stock. Flows over 10% more air than factory intake system!

Our G8x M2/M3/M4 Carbon Fiber Intakes not only look great but they also really perform. Transform your vehicle's performance and appearance today!

Features:

Carbon fiber airboxes and intake tubes, with gloss clear coat for UV protection
CAD-Designed for perfect Integration
Includes Turbo Inlets
Custom high flow air filters specially designed to seal against the carbon fiber airboxes, eliminating any opening for hot air to enter the airboxes.
Key Benefits:

- CAD designed Intake System for perfect integration with the OEM inlet ducting and stock mounting locations.

Carbon Fiber Intake Tubes
- Carbon fiber intake tubes replace factory plastic turbo inlet pipes. The carbon tubes feature a smoother interior without corrugations for increased flow.

- The integrated carbon flange allows secure mounting of the tubes to the carbon air boxes.

- The intake tubes are manufactured using 2x2 twill weave carbon fiber for a great look in the engine bay.

- The inlet tubes are protected by a gloss finish clear coat for UV protection.

- The carbon intake tubes are connected to the turbo by a 4-ply reinforced silicone coupler and 6061-T6 black anodized aluminum flange that utilizes the factory o-ring and retaining clip.

Air Boxes
- Carbon fiber airboxes are manufactured using 2X2 twill weave carbon fiber and protected with a gloss finish clear coat for UV resistance to match the intake tube.

- Air box mounts in stock location with supplied hardware.

Air Filter
- Conical hi-flow reusable air filter; featuring 8 ply oiled cotton gauze construction to maximize filtration efficiency.

- Bellmouth (velocity stack) filter flange inlet to reduce turbulence in order to maximize flow.

Performance:

- The less restrictive intake design allows for more flow to the engine.

Drivers side Stock intake flows 336.2 CFM @ -15 inH20.

Drivers side Turner intake flows 374.3 CFM @ -15 inH20.

This is about a 12% increase over stock

Passenger side stock intake flows 274.2 CFM @ -15 inH20.

Passenger side Turner intake flows 296.3 CFM @ -15 inH20.

This is about an 8% increase over stock

Show More Show Less

Hobb's Switch

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:403482

Part#: ACC-HOBBS

Ships on Jul 27, 2026

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Water/Methanol Port Injection Kit - S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21209840

Part#: BMS-MPIKS58

Ships on Jul 27, 2026

Starting at $ 1,699.00 USD

Add to Wish List

Starting at $ 1,699.00 USD

Add to Wish List

Make tremendous amounts of power on pump gas! The Fuel-It! S58 BMW Port Injection Kit is the ultimate fueling solution for your S58 powered BMW. It adds six supplemental low-pressure fuel injectors allowing fueling of up to 1000+ whp using water/methanol blends. This kit includes stainless steel BMS Elite braided lines. They feature an inner Teflon seal for leak-free operation, stainless steel braid, a black outer nylon mesh for abrasion resistance and a stealthy look. These lines not only look great they are also equipped with BMS Elite AN fittings and can withstand extreme pressure and temperature conditions. The included Burger Motorsports DDP 5800 water/methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. Stealth Tank for G20 G22 & G80 M3 & G82 M4 BMW tucks neatly in the side pocket of your trunk! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve available as well. Throw in a jug of boost juice to get on your way to power! Features & Benefits Included tank leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank Includes 2-way vented black plastic cap Includes all mounting hardware What's included: (1) Fuel-It! S58 Billet Fuel Rail (6) 550cc Fuel Injectors (1) 15' Stainless steel braided water/Methanol line with black nylon sheathing (1) BMS Water/Methanol Pump (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) -6AN ORB fitting (1) -6AN ORB plug (2) 1/8" NPT plugs (3) 14 x 1 Stainless steel screws to secure the rail to your manifold (1) Injector installation jig (1) 8 x 3/4" screw for the installation jig (1) 21/64 drill bit to open the factory injector bosses (1) Superlube® (1) BMS JB4 Port Injection Controller (7) Wire nuts (1) inline fuse holder (1) 12V Relay(1) 15' of red power wire (1) 15' of black power wire (1) 3.5 Gallon Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of 1/4" nylon meth line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) Billet 1/4 push male to -4AN male 90º (pump out) (1) 1/4 push male to female 90º (pump in) (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW G80 M3 S58 3.0L

Sub-Categories

Turner Gloss Carbon Fiber Cold Air Intake - G80 G82 G87 M2/M3/M4 S58 ...

Hobb's Switch

Water/Methanol Port Injection Kit - S58

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results