Dinan BMW Suspension Parts for BMW G82 M4 S58 3.0L

Dinan High Performance Adjustable Coil-Over Suspension System - G8X M...

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22163376

Part#: D190-8210

Back Ordered

1% off MSRP $ 1,318.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,302.99 USD

Add to Wish List

Qty

1% off MSRP

$ 1,318.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,302.99 USD

Add to Wish List

For the driver that demands the best out of their vehicle. The Dinan Adjustable Coil-Over Suspension was bred in the race lab but refined on the street for maximum versatility. No matter the environment, the traction that is awarded to the vehicle from the improved suspension will inspire newfound confidence when running at higher speeds. From the substantial reduction in body roll as well as reduction of dive under braking and squat under acceleration, Dinan guarantees you superior handling, performance, and comfort. Dinan's design retains the superb factory electronic shocks but swaps the springs to a more aggressive, performance-enhancing formula and implements threaded collars that allow the user to change the ride height themselves. While shorter, stiffer springs are commonplace in aftermarket suspensions and are a key element in reduction of body roll it is not a one-size-fits-all all approach. In the case of the G8x M3/M4 where the vehicle has a penchant for oversteer, stiffening the rear springs would exacerbate the problem of the rear losing traction before the front when the platform is pushed to the limit. Dinan instead has opted to soften the rear spring rate as well as switch from the factory progressive rate rear to a dual rate spring setup. The combination increases predictability and compliancy, and in turn, provides better rear grip/road holding for a vehicle that needs both. The result is a sleek lowered stance that provides improved handling to go along with its stunning visual appearance. The springs combined with progressive bump stops and other components increase travel that allows the car to be lowered up to 1-1/8" in the front and 2-1/4" inches the rear. However, to retain the ride quality synonymous with Dinan suspension kits the recommended drop of 3/4" (M4) or 7/8" (M3) in front and 3/4" in the rear is advised. For suspension connoisseurs, or those that are just simply very particular, suspension packers are included to fine-tune handling and comfort by changing the clearance of the progressive bump-stops --- something no respectable race car is without. NOTE: Due to the extensive lowering possible and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. Dinan is not responsible for any property damage or injury. Features: Up to 1" of lowering in front and 2-1/4" of lowering in back are possible depending on tire clearance but with diminished ride quality Dinan recommends a 3/4" (M4) to 7/8" (M3) drop in front and a 3/4" drop in the rear to maintain a civilized ride Up to 1/2" of lift in front and 1-1/4" in back over stock is also possible Threaded collars allow easy and precise front & rear vehicle height adjustments Spring rates are 15% stiffer in front and 10% softer in the rear for increased predictability and compliance Substantial reduction in body roll Dinan-spec progressive bump stops improve ride quality at lowered ride heights Included suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort Components are machined from 6061-T6 aluminum and black anodized for a sporty appearance as well as corrosion protection Stock upper spring mounts are utilized as well as spring isolators for quiet operation Installation Instructions: https://documents.dinancars.com/d190-8210.pdf

Show More Show Less

Dinan Gloss Carbon Fiber Strut Brace Kit - G8x M2, M3, M4

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23218032

Part#: D180-0015

In Stock

11% off MSRP $ 1,318.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,171.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,318.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,171.99 USD

Add to Wish List

The Dinan G8x Strut Tower Brace provides additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. The lightweight brace is designed with maximum function in mind and includes linking structural elements that completely change the OEM 2-piece strut bar set into one blended system that offers additional strengthening against flex. Not one to take a back seat to functionality, aesthetics are also elevated beyond simple steel bars into striking carbon fiber (matte or gloss) with accents that tie in effortlessly into the highly geometric and angular factory engine bay for an OEM+ feel. The imposing carbon fiber brace can be installed in a matter of minutes and used in conjunction with either the stock or Dinan intake systems. While the brace was designed to specifically tie into the latter for a harmoniously balanced and unified appearance the brace can also stand on its own and elicit nearly as equally an impressive visual. Features: Improved chassis rigidity Decreased flex during cornering Lightweight: 5.6 lbs lighter than stock (Dinan CF: 2.8 lbs vs OEM Steel: 8.4 lbs) 2x2 twill carbon fiber with inset aluminum mounting points for increased strength and improved visual appeal Multiple finish options: Available in Gloss or Matte Twill Carbon (Gloss Twill shown) Designed to mesh seamlessly with the Dinan cold air intake creating an aesthetically unified engine bay Bolt-on installation using factory mounting hardware

Show More Show Less

Dinan Front & Rear Sway Bar Set - BMW G8X M2 M3 M4 RWD

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37959658

Part#: D120-0640

Ships in 2 Business Days

11% off MSRP $ 956.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 849.99 USD

Add to Wish List

Qty

11% off MSRP

$ 956.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 849.99 USD

Add to Wish List

Anti-roll bars help reduce body roll in all driving situations, but factory versions are often too soft for comfort rather than performance. Dinan tuned anti-roll bars, however, are engineered specifically for each BMW chassis to enhance responsiveness and handling. By minimizing body roll while maintaining optimal mechanical grip, they keep the car more level, providing a planted and confident feel through corners—an essential upgrade for back road and track enthusiasts.

Show More Show Less

Dinan Front & Rear Sway Bar Set - BMW G8X M2 M3 M4 XDrive

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:37959659

Part#: D120-0645

Ships in 3 Business Days

11% off MSRP $ 956.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 849.99 USD

Add to Wish List

Qty

11% off MSRP

$ 956.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 849.99 USD

Add to Wish List

Anti-roll bars help reduce body roll in all driving situations, but factory versions are often too soft for comfort rather than performance. Dinan tuned anti-roll bars, however, are engineered specifically for each BMW chassis to enhance responsiveness and handling. By minimizing body roll while maintaining optimal mechanical grip, they keep the car more level, providing a planted and confident feel through corners—an essential upgrade for back road and track enthusiasts.

Show More Show Less

Dinan Tension Strut Ball Joint Kit - G8X M2 M3 M4

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21045532

Part#: D280-0030

In Stock

11% off MSRP $ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 415.99 USD

Add to Wish List

Qty

11% off MSRP

$ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 415.99 USD

Add to Wish List

An underrated component of a proper driver's suspension the monoball kit (tension strut ball joint kit in today's terminology), is a remnant of an era when road feel was something desirable and sought after. Drivers wanted the visceral feel of being connected to the road as the road-racing heritage of BMW M demanded. Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M-passioned BMW experience. The Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. They are also sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely. Features: Improved steering responsiveness Reduces brake shimmy Nylon-lined bearings for quiet operation Machined aluminum housings Sealed bearings Compatible with both RWD and xDrive models

Show More Show Less

Dinan Matte Carbon Fiber Strut Brace Kit - G8x M2, M3, M4

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23284042

Part#: D180-0015-B

Ships in 3 Business Days

11% off MSRP $ 1,318.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,171.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,318.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,171.99 USD

Add to Wish List

The Dinan G8x Strut Tower Brace provides additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. The lightweight brace is designed with maximum function in mind and includes linking structural elements that completely change the OEM 2-piece strut bar set into one blended system that offers additional strengthening against flex. Not one to take a back seat to functionality, aesthetics are also elevated beyond simple steel bars into striking carbon fiber (matte or gloss) with accents that tie in effortlessly into the highly geometric and angular factory engine bay for an OEM+ feel. The imposing carbon fiber brace can be installed in a matter of minutes and used in conjunction with either the stock or Dinan intake systems. While the brace was designed to specifically tie into the latter for a harmoniously balanced and unified appearance the brace can also stand on its own and elicit nearly as equally an impressive visual. Features: Improved chassis rigidity Decreased flex during cornering Lightweight: 5.6 lbs lighter than stock (Dinan CF: 2.8 lbs vs OEM Steel: 8.4 lbs) 2x2 twill carbon fiber with inset aluminum mounting points for increased strength and improved visual appeal Multiple finish options: Available in Gloss or Matte Twill Carbon (Matte Twill shown) Designed to mesh seamlessly with the Dinan cold air intake creating an aesthetically unified engine bay Bolt-on installation using factory mounting hardware

Show More Show Less

G8X M3 M4 Experience Package

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:30198000

Part#: G8X-M3M4-E-GBGA

Back Ordered

9% off MSRP $ 6,434.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,849.99 USD

Add to Wish List

Qty

9% off MSRP

$ 6,434.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,849.99 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go-to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders, the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience. Includes Dinan Exhaust Dinan Intake Dinan Strut Brace Dinan Pedal Covers Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +6 HP and +5 lb-ft of torque (Exhaust) Smoother, louder,and sportier sound (Exhaust + X-Pipe) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonators between the secondary catalysts and rear muffler for increased volume (X-Pipe) Between 11 and 16.6 pounds lighter than the stock depending on the package(Exhaust + X-Pipe and Strut Brace) Reduced intake restriction for Increased turbo efficiency with greater power potential on modified builds (Intake) More robust and aggressive induction soundtrack (Intake) Improved throttle response (Intake) Increased rigidity for sharper handling and reduced flex (Strut Brace) Elevated and stylish high-performance look to the interior (Pedal Pads) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge

Show More Show Less

Project Cars

SELECT YOUR BMW

Dinan BMW Suspension Parts for BMW G82 M4 S58 3.0L

Sub-Categories

Dinan High Performance Adjustable Coil-Over Suspension System - G8X M...

Dinan Gloss Carbon Fiber Strut Brace Kit - G8x M2, M3, M4

Dinan Front & Rear Sway Bar Set - BMW G8X M2 M3 M4 RWD

Dinan Front & Rear Sway Bar Set - BMW G8X M2 M3 M4 XDrive

Dinan Tension Strut Ball Joint Kit - G8X M2 M3 M4

Dinan Matte Carbon Fiber Strut Brace Kit - G8x M2, M3, M4

G8X M3 M4 Experience Package

Select Vehicle

Category

Brand

Price

Narrow Results