BMW Suspension Parts for BMW G82 M4 S58 3.0L

BC Racing BR Series Coilover Suspension Kit - BMW G80 M3, G82 M4 ...

T#:13266387

Part#: I-103-BR

Back Ordered

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.

Show More Show Less

G80 M3 BR Series Coilover Suspension Kit - Extreme Low

T#:25341434

Part#: I-103-BR-E

Ships on Oct 20, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Featuring 30 levels of adjustment and performance spring rates and valving that makes the BR Series perfect for both daily drivers and track warriors!

AST 5300 Series Coilovers - 2021+ BMW M3 G80 / M4 G82

T#:29898448

Part#: RAC-B2112SD

Back Ordered

$ 8,127.00 USD

Add to Wish List

Qty

$ 8,127.00 USD

Add to Wish List

Are you the most dedicated enthusiast on the race track? Elevate your racing game to a championship level with the AST 3-WAY MOTORSPORT SUSPENSION. This advanced system empowers you to challenge your vehicle by independently adjusting rebound and low- and high-speed compression with a remote reservoir, providing distinct feedback and a unique driving sensation with each setting. ### Key Features: **Inverted Strut Design:** Built to withstand heavy side loads and braking forces, ensuring peak performance under intense conditions. **MONOTUBE Coilover Design:** Both front and rear dampers utilize this design, offering consistent performance and superior heat dissipation. **Adjustable Spring Rates:** Allows you to fine-tune your vehicle's suspension to meet your specific needs. **Rebound Adjustment:** With 12 distinct positions, you can control the damper's return to extension, affecting how the vehicle responds after compression and providing a unique driving experience with each setting. **Compression Adjustment:** Customize the suspension's response to compression with separate low- and high-speed controls: - **Low-Speed Compression:** Manages the suspension’s reaction to gentle, gradual forces. - **High-Speed Compression:** Handles rapid, forceful impacts. ### Benefits: - **Improved Handling:** Adjusting rebound and compression settings helps reduce body roll during cornering, enhancing responsiveness and maintaining tire contact for better traction. - **Customized Ride Comfort:** Fine-tune compression adjustments to balance performance and comfort, tailoring the ride quality to your preferences. - **Enhanced Front-End Grip:** Camber-adjustable front top mounts provide more wheel adjustment, transforming front-end grip and offering better control over your vehicle’s geometry. ### Additional Features: - **Solid Rear Top Mounts:** Ensure durability and stability under demanding conditions. With the AST 3-WAY MOTORSPORT SUSPENSION, you can fine-tune and customize three critical aspects of your vehicle's suspension, transforming your driving experience and elevating your performance. Designed for the most dedicated racing enthusiasts, this suspension system excels on both the road and the track.

Show More Show Less

Performance Front Adjustable Swaybar End Link Set - E9x M3, E82 1 M ...

10X Entries Into Our F80 M3 Sweepstakes

T#:588018

Part#: 025990TMS07

In Stock

Sale - Save 3% $ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 322.03 USD

Add to Wish List

Qty

Sale - Save 3%

$ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 322.03 USD

Add to Wish List

When lowering your BMW without changing your swaybar end links, a significant amount of preload is applied to the swaybar. This can negatively affect the handling characteristics of your vehicle and cause unwanted stress on a number of other suspension components. Luckily, this can easily be remedied with our very own Turner Performance Adjustable Swaybar End Links! These adjustable end links are designed specifically for your lowered BMW, featuring heat-treated chromoly studs, Teflon lined 1/2" solid bearings with 65 degrees of articulation, CNC machined 6061 and 2024 aluminum shafts, and high-grade hardware for unparalleled performance and reliability. These end links are made 100% in America from American sourced parts and materials!

Show More Show Less

BC Racing Rear Damping Adjustment Extenders - BR Type

T#:555864

Part#: DMP-EXT

Back Ordered

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

Turner Adjustable Toe Arms w/ Eccentric Lockout Plates - F80, F82, G8...

10X Entries Into Our F80 M3 Sweepstakes

T#:587754

Part#: 23672TMS03

In Stock

Starting at $ 432.99 USD

Add to Wish List

Starting at $ 432.99 USD

Add to Wish List

Eliminates any unwanted movement in the rear end associated with the the cumbersome factory eccentric toe adjustment point, opening up a wider range of adjustment for your alignment needs!

Turner Motorsport Performance Rear Sway Bar End Links - F8X M2 M3 M4 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:637368

Part#: 025990TMS011

In Stock

Sale - Save 3% $ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Looking to get the most out of your swaybar? We suggest upgrading to our brand new Performance Rear End Links. Our new line of F8X rear end links feature length-adjustability for eliminating preload on sway bars, Teflon lined FK 1/2" bearings which prove higher load capacities than stock rubber bushings, and heat-treated Chromoly High Misalignment studs that offer extreme articulation, 65 degrees in total, to prevent binding.

Show More Show Less

Turner Carbon Fiber Strut Brace - G80/G82/G87 M2/M3/M4

10X Entries Into Our F80 M3 Sweepstakes

T#:2617092

Part#: 013800LA01

In Stock

Sale - Save 36% $ 1,574.99

This product was last offered at the strikethrough price on
04-03-2026

$ 1,012.66 USD

Add to Wish List

Qty

Sale - Save 36%

$ 1,574.99

This product was last offered at the strikethrough price on
04-03-2026

$ 1,012.66 USD

Add to Wish List

Reduces chassis flex for increased handling, by triangulating the front end for improved handling and control, while enhancing your vehicle's appearance with this beautiful, unique carbon fiber strut brace.

Show More Show Less

Turner Motorsport - Performance Adjustable Rear Traction Links - BMW ...

10X Entries Into Our F80 M3 Sweepstakes

T#:5471050

Part#: 00501TMS08

In Stock

$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD

Limited Qty Sale

Add to Wish List

The stock Genuine BMW rear trailing arms (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Traction Links increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Thanks to their adjustable design, these allow fine tuning of rear bumpsteer and anti-squat characteristics. These arms are designed for use in high-performance street and race vehicles. These traction links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA

Show More Show Less

Turner Motosport - Performance Adjustable Rear Toe Links - BMW F8X M2...

10X Entries Into Our F80 M3 Sweepstakes

T#:5471051

Part#: 00501TMS09

In Stock

Sale - Save 5% $ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD

Add to Wish List

The stock Genuine BMW rear toe links (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Toe Links increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustment allows you to maximize grip on a track car and extend tire life on a street car. The factory rear toe arms utilize an eccentric bolt and washer for adjustment and lack precision and range. These toe links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. Best if tightened to 73.7 ft. lbs. (100 N/M). DO NOT OVERTORQUE! ECS is not liable for any issues due to overtorque. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA

Show More Show Less

2-Piece Rear Subframe Bushing - Rear Position (95A) - F8X G2X G8X ...

10X Entries Into Our F80 M3 Sweepstakes

T#:53326250

Part#: 056755LAKT

In Stock

$ 104.98

This product was last offered at the strikethrough price on
05-07-2026

$ 100.98 USD

Add to Wish List

Qty

$ 100.98 USD

Add to Wish List

Enhance rear-end control and put more power to the ground with a straightforward 3-piece design that installs with ease. The factory rubber may favor ride comfort, but it struggles to keep up when driving gets aggressive. As it wears, the OEM bushing can soften and deform, reducing stability and allowing wheel hop to creep in when you need traction most.

Our 95A durometer polyurethane bushings solve that problem. Engineered to strike the perfect balance between soft factory rubber and harsh solid mounts, they significantly reduce differential movement without introducing excessive vibration. The result is more efficient power transfer, so your torque goes straight to the rear wheels instead of being lost in drivetrain flex.

Features & Benefits:

Minimizes differential movement and instability to help eliminate wheel hop
Two-piece 95A split polyurethane design for easier installation
Precision-fit insert reinforces the bushing and strengthens mounting points
Resistant to road salt, oils, and harsh chemicals
Compatible with dual mount differential plates
Design:

Type II Anodized 6061-T6 CNC billet aluminum inserts for superior corrosion resistance and durability.
95A Polyurethane 2-Piece Isolator.
Product Development:

Our Rear Differential Bushings are designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Show More Show Less

Performance Adjustable Front Sway Bar End Links - Pair - G8X M3 M4 Ba...

10X Entries Into Our F80 M3 Sweepstakes

T#:5471062

Part#: 00501TMS021

In Stock

Sale - Save 3% $ 300.99

This product was last offered at the strikethrough price on
06-14-2026

$ 291.96 USD

Add to Wish List

Qty

Sale - Save 3%

$ 300.99

This product was last offered at the strikethrough price on
06-14-2026

$ 291.96 USD

Add to Wish List

If you plan to upgrade your sway bar, we highly recommend complementing this purchase with the new Turner Performance Front Sway Bar End Links! While great for a daily driver, the stock BMW end links (31308091445 & 31308091446) aren't as strong as we'd desire them to be to stand up to demanding track use and abuse. These upgraded Adjustable End Links feature massive Teflon-lined FK 1/2" bearings to provide the highest load capacity for use with stiffer aftermarket sway bars. Heat-treated Chromoly High Misalignment Studs connect to the sway bar and offer extreme articulation capability (65 degrees) to prevent the end links from binding when used with different adjustment holes on aftermarket sway bars. Thanks to their adjustable design, these allow you to eliminate preload on the sway bars. Preload can result from uneven settling of springs or uneven suspension heights from corner weighting/leveling. Blue Anodized 6061-T6 Aluminum Turnbuckles work in conjunction with the left and right-hand threaded rod ends for simple and precise adjustment. NOTE: These end links are designed to work with vehicles that are at the stock ride height or slightly lowered (less than 1 inch).

Show More Show Less

Performance Adjustable Front Lower Control Arms - Pair - G8X M2 M3 M4...

10X Entries Into Our F80 M3 Sweepstakes

T#:5471061

Part#: 00501TMS020

In Stock

Sale - Save 3% $ 910.99

This product was last offered at the strikethrough price on
06-14-2026

$ 883.66 USD

Add to Wish List

Qty

Sale - Save 3%

$ 910.99

This product was last offered at the strikethrough price on
06-14-2026

$ 883.66 USD

Add to Wish List

The stock Genuine BMW front "lower" control arms (31108095665 & 31108095666) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics. In order to address this issue, Turner now offers new Performance Adjustable Front Lower Control Arms! These control arms offer multiple benefits over stock control arms, helping to keep your BMW under control and on the track. In order to get the most out of your BMW M3/M4, these new control arms provide roll center, camber, and track width adjustment to dial in your alignment for optimal handling! Additionally, the ball joint angle has been corrected to allow for full articulation. Stainless Steel spacers are provided to correct roll center for lowered vehicles. The use of FK Rod Ends and High Misalignment Spherical Bearings eliminates the flex and binding found in the OEM control arms while allowing smooth articulation. Another great feature of these control arms is the Double Adjuster Lock Down. This allows camber and track width settings to be adjusted and locked in without the use of finicky jam nuts. This double adjuster is machined from 4130 Chromoly; gun-drilled to reduce weight, then electroless nickel plated for corrosion resistance. A ride height sensor bracket is also integrated to maintain factory ride height sensor location, regardless of the length of the arm to keep BMW's chassis electronics happy. Front Lower Control Arm Features: Lightweight 6061-T6 Billet Aluminum Electroless nickel plated 4130 Chromoly Double Adjuster for quick adjustment Correct ball joint angle for full articulation Rotating Clamp design allows for easy access to lock down alignment settings Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends Multiple size Stainless Steel roll center spacers for precise adjustment Sold as a pair. Made in the USA.

Show More Show Less

Performance Adjustable Front Tension Rods - Pair - G8X M3 M4 Base & C...

10X Entries Into Our F80 M3 Sweepstakes

T#:5471046

Part#: 00501TMS04

Ships on Jan 11, 2027

$ 672.99 USD

Add to Wish List

Qty

$ 672.99 USD

Add to Wish List

The stock Genuine BMW front "upper" control arms (31108095667 & 31108095668) are great for standard daily driving and occasional spirited driving, but tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics. In order to address this issue, Turner now offers new Performance Front Tension Rods with upgraded FK Spherical Bearings! These tension rods offer multiple benefits over stock control arms, helping to keep your BMW under control and on the track. The biggest upgrade over the stock control arm is the replacement of the rubber bushing with JMX hardened Teflon-lined low-friction FK Spherical Bearings. This allows for smooth control arm articulation, without the standard mushy feel you'd expect from rubber bushings. As a result, you get a more responsive feel that inspires confidence lap after lap! The PTFE liner is chemically bonded to the inner diameter of the race. The liner offers a very high load carrying capacity and has greatly increased dynamic wear characteristics, offering robust reliability for both street and track use. Another benefit of these Performance Tension Rods is increased caster adjustment, allowing precise alignment for optimal turn-in response and to compensate for variances between left and right caster. Adjustable Tension Rod Features: Gun drilled and Blue Anodized 2024 Aluminum links to reduce unsprung weight Rotating 6061-T6 Aluminum Clamp design Hardened JMX high misalignment low friction 3-piece Teflon lined FK Heim joints/rod ends Stainless steel anti-dive spacers ASTM A574 socket head cap bolts are used for maximum articulation with a minimum tensile strength of 170,000 psi Sold as a pair. Made in the USA.

Show More Show Less

AST Suspension Adjustable Top Mount Camber Plates - OEM Damper - BMW ...

T#:32980571

Part#: TMA-B20-A2-20F

In Stock at Vendor

$ 1,140.00 USD

Add to Wish List

Qty

$ 1,140.00 USD

Add to Wish List

The latest innovative design from the expert engineers at AST Suspension is a solution for BMW owners seeking additional camber adjustment while retaining the factory struts. AST Suspension’s lowering spring and adjustable lowering spring sets can be combined with the camber-adjustable top mounts, meaning customers who have already equipped their vehicles with those components can now improve camber adjustability without losing the electronic dampers’ OE functionality. These new top mounts provide an additional 0° to -4.2° of camber adjustment, improving on factory adjustments done via the OE arms. AST Suspension opted for solid bushings made from 7075 high-grade aluminum with stainless steel inserts, manufactured in Japan. AST Suspension has employed these bearings in various applications for over 25 years, and they are trusted for their long-lasting anti-wear characteristics that have led to success in endurance racing. As an added benefit, these motorsport-quality bearings are effectively silent, preserving factory NVH. AST Suspension specializes in producing suspension components for vehicles serving regular street use and competition purposes such as race, rally, autocross, and more. The company has continuously evolved since its establishment in 2000 and has always taken pride in its work. By combining in-house design and production with technical know-how, industry experience, and road-and-track testing, AST Suspension consistently produces exceptional suspension components at a competitive price. Features: Adjustment from 0 degrees to -4.2 degrees of camber Retains full functionality of OE dampers Compatible with AST Lowering Springs and Adjustable Lowering Springs

Show More Show Less

Active Autowerke "G-Brace" - G80 G82 G83 G87 M2 M3 M4 S58

T#:25109039

Part#: AAG8XGBRACE

Ships in 3 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

Active Autowerke designed this piece to allow for more clearance with aftermarket mid-pipes. Factory clearance is tight and not conducive for larger than factory diameter piping. This piece allows for more clearance without sacrificing any structural rigidity and is made from high-strength 6061 aluminum to match the strength of the OEM brace.

Show More Show Less

Rod End Boot (14-18mm) - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:599632

Part#: RERS3

In Stock

Sale - Save 43% $ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Qty

Sale - Save 43%

$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.

Show More Show Less

G8X M2 / M3 / M4 CSL Carbon Front Strut Brace

T#:26471475

Part#: G8XSB02-CF-AB

Ships in 3 Business Days

$ 3,115.00 USD

Add to Wish List

Qty

$ 3,115.00 USD

Add to Wish List

M4 CSL brace has been designed to enhance the sportive character of M cars, at the same time as it brings the best rigidity to the chassis. Designed and manufactured in Spain under strict quality requirements according to UNE-EN ISO 9001:2015. This piece is made by hand with the best carbon fiber prepreg. This piece is manufactured by combining craft and technology. On the one hand, with the care and attention to detail that characterizes our company, and on the other, with the use of the most modern equipment in some critical points of the process, such as 3D scanning, autoclave curing, and robotic cutting. The G8X CSL strut brace has been manufactured with monobloc tubular technology, avoiding unnecessary joints that could result in weak points. Lamination has been carefully designed, and we include 3 different fabrics, all best quality, including high-modulus unidirectional carbon. 6061 aluminum machined components complete the piece providing great resistance to wear in the area of joint to the chassis. Not just to save weight, but to achieve the strength and rigidity necessary for a functional part with similar characteristics to the OEM part. The result? A piece with an OEM finish and fitment, but with an awesome appearance and only 1.8 kilos, which is a significant weight reduction compared to the original bar which is 3.5 kilos.

Show More Show Less

Karbonius Carbon Fiber Front Strut Brace - Matte Twill - G8X M2 M3 M4...

T#:28836370

Part#: G8XSBM22B

Ships in 3 Business Days

$ 1,646.99 USD

Add to Wish List

Qty

$ 1,646.99 USD

Add to Wish List

Experience the pinnacle of performance and style with our fully redesigned Carbon Fiber Strut Brace Bar. Meticulously crafted from 100% Prepreg carbon fiber using an autoclave tubular system, this brace bar sets a new standard in durability and engineering precision.

Featuring a striking 2x2 twill weave matte carbon fiber finish, complemented by black accents on the CNC mounting brackets, this front strut brace not only enhances your vehicle's appearance but also delivers unparalleled functionality.

Key Features:

Enhanced Rigidity: Exceptional chassis rigidity improves handling and responsiveness, enhancing your driving experience. Weight Reduction: Our design sheds 5.5 lbs of weight, boosting performance and agility on the road or track. Sporty Appearance: Elevate your car's aesthetic with a sleek, sporty look that perfectly complements its performance category. Integrated CNC Machined Aluminum: Reinforced with CNC machined 6061 aluminum components, anodized in a natural color, for added strength and a touch of style. Easy Installation: Quick and straightforward installation means you can enjoy the benefits of a sportier ride without any hassle or extensive downtime. Upgrade your driving dynamics and make a statement with our Carbon Fiber Strut Brace Bar, transforming your car into a true performance machine.

Show More Show Less

Karbonius Carbon Fiber Front Strut Brace - Gloss Twill - G8X M2 M3 M4...

T#:29035354

Part#: G8XSB02CF2AS

Ships in 3 Business Days

$ 2,995.00 USD

Add to Wish List

Qty

$ 2,995.00 USD

Add to Wish List

Experience the pinnacle of performance and style with our fully redesigned Carbon Fiber Strut Brace Bar. Meticulously crafted from 100% Prepreg carbon fiber using an autoclave tubular system, this brace bar sets a new standard in durability and engineering precision.

Featuring a striking 2x2 twill weave matte carbon fiber finish, complemented by black accents on the CNC mounting brackets, this front strut brace not only enhances your vehicle's appearance but also delivers unparalleled functionality.

Key Features:

Enhanced Rigidity: Exceptional chassis rigidity improves handling and responsiveness, enhancing your driving experience. Weight Reduction: Our design sheds 5.5 lbs of weight, boosting performance and agility on the road or track. Sporty Appearance: Elevate your car's aesthetic with a sleek, sporty look that perfectly complements its performance category. Integrated CNC Machined Aluminum: Reinforced with CNC machined 6061 aluminum components, anodized in a natural color, for added strength and a touch of style. Easy Installation: Quick and straightforward installation means you can enjoy the benefits of a sportier ride without any hassle or extensive downtime. Upgrade your driving dynamics and make a statement with our Carbon Fiber Strut Brace Bar, transforming your car into a true performance machine.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW G82 M4 S58 3.0L

Sub-Categories

BC Racing BR Series Coilover Suspension Kit - BMW G80 M3, G82 M4 ...

G80 M3 BR Series Coilover Suspension Kit - Extreme Low

AST 5300 Series Coilovers - 2021+ BMW M3 G80 / M4 G82

Performance Front Adjustable Swaybar End Link Set - E9x M3, E82 1 M ...

BC Racing Rear Damping Adjustment Extenders - BR Type

Turner Adjustable Toe Arms w/ Eccentric Lockout Plates - F80, F82, G8...

Turner Motorsport Performance Rear Sway Bar End Links - F8X M2 M3 M4 ...

Turner Carbon Fiber Strut Brace - G80/G82/G87 M2/M3/M4

Turner Motorsport - Performance Adjustable Rear Traction Links - BMW ...

Turner Motosport - Performance Adjustable Rear Toe Links - BMW F8X M2...

2-Piece Rear Subframe Bushing - Rear Position (95A) - F8X G2X G8X ...

Performance Adjustable Front Sway Bar End Links - Pair - G8X M3 M4 Ba...

Performance Adjustable Front Lower Control Arms - Pair - G8X M2 M3 M4...

Performance Adjustable Front Tension Rods - Pair - G8X M3 M4 Base & C...

AST Suspension Adjustable Top Mount Camber Plates - OEM Damper - BMW ...

Active Autowerke "G-Brace" - G80 G82 G83 G87 M2 M3 M4 S58

Rod End Boot (14-18mm) - Priced Each

G8X M2 / M3 / M4 CSL Carbon Front Strut Brace

Karbonius Carbon Fiber Front Strut Brace - Matte Twill - G8X M2 M3 M4...

Karbonius Carbon Fiber Front Strut Brace - Gloss Twill - G8X M2 M3 M4...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results