Burger Motorsports BMW Intake Parts for BMW G82 M4 S58 3.0L

BMS Drop-In Performance Air Filters - S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38621427

Part#: BMS-DAF-S58

Ships on Jul 27, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Burger Motorsports Performance S58 G8X BMW Drop-In Air Filters exceed OE standards, featuring oiled cotton media for enhanced airflow, effective contaminant filtration, and increased horsepower. These high-performance filters are washable and reusable, designed to last the lifetime of your vehicle. They easily install into your factory airboxes. Replaces OEM BMW part numbers: 🔹 Left: 13-71-8-095-807 🔹 Right: 13-71-8-095-805

Show More Show Less

BMS Elite Performance Intake With Red Filters - G80/G82 M3/M4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3943329

Part#: G8X-ELT-INTK-R

Ships on Jul 27, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The BMS Elite Performance Intake retains everything that's good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow 3.5" ducting and quality BMS inverted cone air filters to match.

Show More Show Less

BMS Elite Performance Intake with Blue Filters - G80/G82 M3/M4 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3886580

Part#: G8X-ELT-INTK-B

Ships on Jul 27, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The BMS Elite Performance Intake retains everything that's good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow 3.5" ducting and quality BMS inverted cone air filters to match.

Show More Show Less

CANbus Flex Fuel Kit - Complete Kit W/ CABbus ECA & Universal Harness...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49613450

Part#: G8XS58CANFFUH

Ships on Jul 27, 2026

$ 479.99

This product was last offered at the strikethrough price on
05-22-2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

Buger Motorsports 700HP Package - Blue Filters - BMW G8X S58 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41255925

Part#: S58700HP-BLUKT

Ships on Jul 27, 2026

$ 2,075.99

This product was last offered at the strikethrough price on
05-23-2026

$ 2,066.00 USD

Add to Wish List

Qty

$ 2,066.00 USD

Add to Wish List

Unleash 700+ HP with safe, proven JB4 tuning on your locked ECU while maintaining reliability and drivability. This package delivers maximum power, optimized airflow, and real-time performance monitoring—all with easy plug-and-play installation and no permanent modifications.

Show More Show Less

BMS Drop-In Performance Air Filters - S63/68

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38688928

Part#: BMS-DAF-S6368

Ships on Jul 27, 2026

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

Burger Motorsports Performance S63/S68 BMW X5, X5M, X7, and XM Drop-In Air Filters exceed OE standards, utilizing layered, oiled cotton media that maximizes airflow while effectively trapping contaminants and increasing horsepower. These high-performance filters are washable, reusable, and engineered to last the life of your vehicle. Easy to install, they fit directly into your factory airboxes for a quick upgrade.

Show More Show Less

Burger Motorsports S58 Port Injection Intake Manifold And Intercooler...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46993579

Part#: BMSS58PIIM

Ships on Jul 24, 2026

Starting at $ 2,499.00 USD

Add to Wish List

Starting at $ 2,499.00 USD

Add to Wish List

When it comes to S58 intake manifolds it doesn't get any better than this. The Burger Motorsports intake manifold replaces your factory plastic S58 manifold and intercooler with a direct-fit, high-flow, high-strength aluminum manifold. The intercooler core is double the size of the factory unit, and the manifold features port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern. Includes high-quality o-rings and all required hardware. The BMS manifold has approximately 76.1% more internal volume than the OEM manifold

Show More Show Less

BMW 5bar Sensor - B58/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49822565

Part#: BMSB585BS

Ships on Jul 27, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.

Show More Show Less

BMS Front Mount Performance Silicone Intake - Blue Filters

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41255920

Part#: S58FMSILINT-BLU

Ships on Jul 27, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Elevate the capabilities of your G8x or F9x S58-powered BMW with an intake system engineered to true motorsport standards. The BMS Front-Mount Performance Intake completely eliminates the restrictive OEM induction setup, replacing it with a continuous 3.5" high-flow tract designed for maximum volumetric efficiency.

Show More Show Less

BMS Elite Performance Intake - Flat Black W/ Blue Filters

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:39633149

Part#: G8XELTINFBBF

Ships on Jul 27, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

BMS Elite Performance Front Mount Intake - Red - G8X S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:12413839

Part#: S58FMINTAKERED

Ships on Jul 27, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Red Filter with Front Mount Relocation. An intake system worthy of your S58 G80 M3 and G82 G83 M4! The Front Mount (behind the grille) BMS Elite G8x S58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.

Show More Show Less

BMS Elite Performance Front Mount Intake - Blue - G8X S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:12413838

Part#: S58FMINTAKEBLUE

Back Ordered

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Blue Filter with Front Mount Relocation. An intake system worthy of your S58 G80 M3 and G82 G83 M4! The Front Mount (behind the grille) BMS Elite G8x S58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558165

Part#: 1G-MT-CL

Ships in 4 Business Days

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558163

Part#: BMS-WMI

Ships on Jul 24, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Jul 27, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Water/Methanol Injection Hose - 20'

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176934

Part#: BMS-WMI-SOL

Ships on Jul 27, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

BMS Water/Methanol Port Injection (WMI) Kit - S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308440

Part#: WMIK-S58

Ships on Jul 24, 2026

Starting at $ 1,899.00 USD

Add to Wish List

Starting at $ 1,899.00 USD

Add to Wish List

The Fuel-It! S58 BMW Port Injection Kit is the ultimate fueling solution for your S58 powered BMW. It adds six supplemental low-pressure fuel injectors allowing fueling of up to 1000+ whp using water/methanol blends. This kit includes stainless steel BMS Elite braided lines. They feature an inner Teflon seal for leak-free operation, stainless steel braid, a black outer nylon mesh for abrasion resistance and a stealthy look. These lines not only look great they are also equipped with BMS Elite AN fittings and can withstand extreme pressure and temperature conditions. The included Burger Motorsports DDP 5800 water/methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. Stealth Tank for G20 G22 & G80 M3 & G82 M4 BMW tucks neatly in the side pocket of your trunk! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Features & Benefits Included tank leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank Includes 2-way vented black plastic cap Includes all mounting hardware What's included: (1) Fuel-It! S58 Billet Fuel Rail (6) 550cc Fuel Injectors (1) 15' Stainless steel braided water/Methanol line with black nylon sheathing (1) BMS Water/Methanol Pump (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) -6AN ORB fitting (1) -6AN ORB plug (2) 1/8" NPT plugs (3) 14 x 1 Stainless steel screws to secure the rail to your manifold (1) Injector installation jig (1) 8 x 3/4" screw for the installation jig (1) 21/64 drill bit to open the factory injector bosses (1) Superlube® (1) BMS JB4 Port Injection Controller (7) Wire nuts (1) inline fuse holder (1) 12V Relay (1) 15' of red power wire (1) 15' of black power wire 3.5 Gallon Tank: What's included: (1) 3.5 Gallon Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of 1/4" nylon meth line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) Billet 1/4 push male to -4AN male 90º (pump out) (1) 1/4 push male to female 90º (pump in) (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Show More Show Less

WMI Inline Filter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21176933

Part#: BMS-WMI-FIL

Ships on Jul 27, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

BMS 3.5 Gallon Stealth Water/Methanol Injection (WMI) Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815187

Part#: BMW35G28

Ships on Jul 24, 2026

Starting at $ 279.00 USD

Add to Wish List

Starting at $ 279.00 USD

Add to Wish List

Safe, sleek, and ready to install out of the box! Your choice of color and accessories! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve (ES4714530) Burger Motorsports DDP 5800 water methanol alcohol Injection pump (ES4714532) Features & Benefits Leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank (pump sold separately) Tank dimensions: L 20.5" x W 11" X H 13.5" What's included: (1) Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (2) 1/4 push male to female 90º to pump in (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Show More Show Less

Super Atomizing Water/Methanol Injection Nozzles

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Aug 6, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less

Project Cars

SELECT YOUR BMW

Burger Motorsports BMW Intake Parts for BMW G82 M4 S58 3.0L

Sub-Categories

BMS Drop-In Performance Air Filters - S58

BMS Elite Performance Intake With Red Filters - G80/G82 M3/M4 ...

BMS Elite Performance Intake with Blue Filters - G80/G82 M3/M4 ...

CANbus Flex Fuel Kit - Complete Kit W/ CABbus ECA & Universal Harness...

Buger Motorsports 700HP Package - Blue Filters - BMW G8X S58 ...

BMS Drop-In Performance Air Filters - S63/68

Burger Motorsports S58 Port Injection Intake Manifold And Intercooler...

BMW 5bar Sensor - B58/S58

BMS Front Mount Performance Silicone Intake - Blue Filters

BMS Elite Performance Intake - Flat Black W/ Blue Filters

BMS Elite Performance Front Mount Intake - Red - G8X S58

BMS Elite Performance Front Mount Intake - Blue - G8X S58

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

1 Gallon Methanol Tank - Clear/White

BMS DDP5800 Water/Methanol Injection Pump

2 Gallon Low Profile Universal Methanol Tank

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

1.25 Gallon Heavy-Duty Universal Methanol Tank

Water/Methanol Injection Hose - 20'

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

BMS Water/Methanol Port Injection (WMI) Kit - S58

WMI Inline Filter

BMS 3.5 Gallon Stealth Water/Methanol Injection (WMI) Tank

Super Atomizing Water/Methanol Injection Nozzles

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results