BMW Intake Parts for BMW G82 M4 S58 3.0L

Turner Gloss Carbon Fiber Cold Air Intake - G80 G82 G87 M2/M3/M4 S58 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:13036529

Part#: 013859LA10

Ships on Oct 9, 2026

Sale - Save 3% $ 2,042.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,981.70 USD

Add to Wish List

Qty

Sale - Save 3%

$ 2,042.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,981.70 USD

Add to Wish List

At Turner, all our Carbon Fiber Intake Systems are top-of-the-line custom-engineered products that we develop in house. Our G8x Intake is no exception. Turner Carbon Fiber Intakes start with a 3D scan of the factory intake and engine bay. Our engineers use these 3D images of the chassis to design the intake in SolidWorks modeling software. Using a Flow Bench, our Intake is then airflow tested against the factory intake, to ensure optimal airflow improvement against stock. The final product is a beautiful and functional Carbon Fiber Intake, CAD designed for perfect integration with the OEM inlet ducting and stock mounting locations and proven to flow better than factory.

Our G8x carbon fiber airbox sport entirely carbon fiber construction, with a removable carbon fiber lid for easy air filter access. Our enclosed carbon fiber intake systems are also proven to lower intake temps vs. open filter intakes. Plus, they further enhance the appearance of the engine bay, by adding more beautiful carbon fiber. The carbon airbox and lid is manufactured using 2X2 twill weave carbon fiber and protected with a gloss finish clear coat for UV resistance. The Best part? The airbox mount in the stock location with all supplied hardware included.

The oval intake tube design matches the OE look, allowing the intake to be used with the factory structural brackets that the intake goes through. However, the cross-sectional area of the Turner Carbon Fiber intake tube is greater than the stock intake tube, with a smooth interior for even better flow. The carbon intake tube is manufactured using 2X2 twill weave carbon fiber, and the intake tube is protected by a gloss finish clear coat for UV protection.

With the oval design of the intake tube, the custom air filter had to be designed for this intake system. The air filter is specially designed to seal against the carbon fiber airbox, eliminating any opening for hot air to enter the airbox! We created a conical hi-flow reusable air filter; featuring 8 ply oiled cotton gauze construction to maximize filtration efficiency. This filter features a Bellmouth (velocity stack) filter flange inlet to reduce turbulence in order to maximize flow.

Overall, the less restrictive intake design allows for more flow to the engine. The Drivers side Stock intake flows 336.2 CFM @ -15 inH20. The Drivers side Turner intake flows 374.3 CFM @ -15 inH20. This is about a 12% increase over stock The Passenger side stock intake flows 274.2 CFM @ -15 inH20.The Passenger side Turner intake flows 296.3 CFM @ -15 inH20. This is about an 8% increase over stock. Flows over 10% more air than factory intake system!

Our G8x M2/M3/M4 Carbon Fiber Intakes not only look great but they also really perform. Transform your vehicle's performance and appearance today!

Features:

Carbon fiber airboxes and intake tubes, with gloss clear coat for UV protection
CAD-Designed for perfect Integration
Includes Turbo Inlets
Custom high flow air filters specially designed to seal against the carbon fiber airboxes, eliminating any opening for hot air to enter the airboxes.
Key Benefits:

- CAD designed Intake System for perfect integration with the OEM inlet ducting and stock mounting locations.

Carbon Fiber Intake Tubes
- Carbon fiber intake tubes replace factory plastic turbo inlet pipes. The carbon tubes feature a smoother interior without corrugations for increased flow.

- The integrated carbon flange allows secure mounting of the tubes to the carbon air boxes.

- The intake tubes are manufactured using 2x2 twill weave carbon fiber for a great look in the engine bay.

- The inlet tubes are protected by a gloss finish clear coat for UV protection.

- The carbon intake tubes are connected to the turbo by a 4-ply reinforced silicone coupler and 6061-T6 black anodized aluminum flange that utilizes the factory o-ring and retaining clip.

Air Boxes
- Carbon fiber airboxes are manufactured using 2X2 twill weave carbon fiber and protected with a gloss finish clear coat for UV resistance to match the intake tube.

- Air box mounts in stock location with supplied hardware.

Air Filter
- Conical hi-flow reusable air filter; featuring 8 ply oiled cotton gauze construction to maximize filtration efficiency.

- Bellmouth (velocity stack) filter flange inlet to reduce turbulence in order to maximize flow.

Performance:

- The less restrictive intake design allows for more flow to the engine.

Drivers side Stock intake flows 336.2 CFM @ -15 inH20.

Drivers side Turner intake flows 374.3 CFM @ -15 inH20.

This is about a 12% increase over stock

Passenger side stock intake flows 274.2 CFM @ -15 inH20.

Passenger side Turner intake flows 296.3 CFM @ -15 inH20.

This is about an 8% increase over stock

Show More Show Less

Dinan High Flow Drop-In Replacement Filters - BMW G80 G82 G83 G87 S58...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:32516359

Part#: D401-0047

In Stock

11% off MSRP $ 107.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 95.89 USD

Add to Wish List

Qty

11% off MSRP

$ 107.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 95.89 USD

Add to Wish List

Dinan High Flow Drop-in Replacement Filters are a direct upgrade to your factory intake system and will instantly provide better flow to assist your engine in achieving maximum performance and efficiency! While factory paper filters function admirably, they can be restrictive to performance goals given the material used. They also require being replaced numerous times during the lifespan of the vehicle which can add up to a substantial amount in maintenance costs. Limited performance and increased maintenance costs are never ideal but can be resolved effectively and economically in the case of filters. Dinan High Flow Drop-in Replacement Filters are constructed of 4 layers of cotton gauze that allow better flow and less pressure drop than the stock media. This equates to the engine not needing to work as hard to make the same or more power. Additionally, the use of oiled cotton media means that the Dinan filters are washable/reusable while still retaining excellent filtration and ensuring your engine runs clean for the duration. When upgrading to a complete Dinan intake system for best performance, is not available, possible, or within the budget, Dinan High Flow Drop-in Replacement Filters have you covered! Features & Benefits: Less restrictive and better flowing than stock allowing maximum engine performance and efficiency Direct replacement for stock air filter 4 layers of proprietary high flow oiled cotton gauze material for exceptional filtration Washable and reusable for the life of the engine Quick and easy installation

Show More Show Less

Dinan Carbon Fiber Cold Air Intake - Gloss - G80 M3, G82/83 M4, G87 M...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:13069367

Part#: D760-0063

In Stock

11% off MSRP $ 2,081.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,849.99 USD

Add to Wish List

Qty

11% off MSRP

$ 2,081.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,849.99 USD

Add to Wish List

With the most potent BMW inline-6 to date, the S58, the newest iteration of the M3 has set itself apart from its predecessors; given the option for AWD, a model first, the M3 breaks boundaries long maintained by the quintessential brand icon. Being the signature chassis Dinan modifies, development on the G8x needed to similarly raise the bar and distinguish itself from the pack; a difficult task but one we relished the opportunity to embark upon. After months of comprehensive design and validation, that journey has come to its conclusion for the first of those ambitious aspirations - the Dinan G8x Carbon Fiber Cold Air Intake. Equal parts function, sound, and beauty, the intake not only looks and sounds the part of something special but performs the part as well. With a 12% increase in airflow to the engine without any negative effects on inlet temperatures or pressure, the Dinan G8x system delivers on all fronts. Drawing in more unimpeded air for consumption yields more efficient turbos (less work to make the same power) with the capacity for greater power potential on modified builds. Central to the design and our obsessive-compulsive need for a symmetrical engine bay is a singular plenum that replaces the separated driver and passenger intake ducting on the stock setup. The combination of the two tracks into one enlarged and distinctive shared pathway allows 50% more volume to be achieved in this tight space in addition to simplifying the installation and improving the overall look. The center plenum gives way to enlarged airboxes that house 11% larger cotton air filters delivering superb filtration while maximizing flow. Feeding the filters are the factory grill inlets as well as additional cutouts on the top of each airbox lid. The semi-open design was analyzed extensively to ensure that these additional inlets had no ill effect on temperatures or flow. However, the secondary airbox passages do allow an avenue for the induction soundtrack to escape the confines of its former plastic prison for everyone's benefit. Whether under hard acceleration, deceleration, or just spooling the amplified sounds are sure to make an impression. Beyond improvements to flow and sound, the appearance of the Dinan G8x M2/M3/M4 intake system is unrivaled. One need not do more than take a casual glance to know that care was taken with the system to blend in naturally with the factory engine bay while sufficiently augmenting it to a tier above. Playing off the hard angular edges that are present throughout, the Dinan intake system carefully takes these queues and carries them throughout for a true OEM+ look and feel. A 2x2 twill carbon fiber weave is used throughout and available in either gloss or matte - a first for Dinan, further setting the intake apart from those that came before. Features: Reduced intake restriction for Increased turbo efficiency with greater power potential on modified builds More robust and aggressive induction soundtrack Improved throttle response More Flow: 12.4% increase over stock system (Stock: 815 CFM, Dinan: 916 CFM @ 28" H2O). Larger volume air boxes (26% larger than stock) and tubes/plenum (50% larger than stock) allowing an increased volume of air to be utilized 11% increase in filter area (stock: 65in², Dinan: 72in² per side) for optimum flow Multiple finish options: Available in 2x2 Gloss or Matte Twill Carbon (Gloss Twill shown) Bolt-on installation NOTE: OEM M4 CSL strut brace is not compatible with the Dinan intake.

Show More Show Less

Dinan Foundation Package - BMW G8X M3 M4

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:32814619

Part#: G8X-M3M4-F-GBKT

Ships in 8 Business Days

$ 4,022.99 USD

Add to Wish List

Qty

$ 4,022.99 USD

Add to Wish List

Foundation packages represent the most direct path to increased power while retaining drivability and safety. The combination of Dinan modifications work harmoniously with one another and offer a balanced blend of enhanced engine efficiency, improved acceleration and increased power to go along with a tasteful high-performance look and unmistakable Dinan sound. Whether you start with the base Foundation package that includes the core hardware building blocks (intake and exhaust), or opt for packages that further enhance your vehicles power output and abilities you will be well on your way to an elevated experience. WHY GET A PACKAGE? We understand the building a modified car in stages is often preferred for various reasons. Not knowing how deep into the modification journey you may go or simply for financial reasons are common justifications for a measured approach. However, often when building in stages, parts are mixed and matched that were not designed to interact with one another which can lead to sub-par results and unhappiness with a vehicle you should be enjoying. By purchasing and installing popular curated packages of parts that were all designed to work with one another you bypass these common faults and receive a complete solution you can enjoy to the fullest from day one. As a bonus, a 10% discount is applied to package purchases compared to buying the same components a la carte. WHAT'S INCLUDED IN THE BASE G8x M3/M4 FOUNDATION PACKAGE (F)? Dinan Carbon Fiber Cold Air Intake (D760-0063) for increased flow, efficiency as well as underhood visual appeal Dinan Free Flow Axle-Back Exhaust w/ Black Tips (D660-0093-BLK) and corresponding X-Pipe (D660-0094) for maximum aural pleasure Features: Maximum gains of +6 HP and +5 lb-ft of torque (Exhaust) Smoother, louder and sportier sound (Exhaust + X-Pipe) Computer controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonators between the secondary catalysts and rear muffler for increased volume (X-Pipe) 11-pounds lighter than the stock (Stock: 66-pounds vs. Dinan: 55-pounds) (Exhaust + X-Pipe) Reduced intake restriction for Increased turbo efficiency with greater power potential on modified builds (Intake) More robust and aggressive induction soundtrack (Intake) Improved throttle response (Intake) 7 points towards the illustrious Dinan deck lid badge

Show More Show Less

High Performance Drop-In Air Filter Upgrade - Black - S58 G80, G82, G...

2X Entries Into Our F80 M3 Sweepstakes

T#:5802145

Part#: VTT-S58-FILTER-B

In Stock

$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.99 USD

Limited Qty Sale

Add to Wish List

Features: 50 States Emissions Legal Easy to install 15-30 minutes even for a novice Filters can be cleaned forever meaning never buy new filters Up to 13WHP gains Completely reversible if you ever want to remove VTT is proud to offer high-performance drop-in replacement filters for the 2021+ G8X M3/M4. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. On the dyno, VTT saw more than 13WHP gains with these filters and our Carbon Fiber intake Tops. These filters will also work perfectly with the stock tops. We recommend removing the pre-filter for best flow if the stock top is used. Black.

Show More Show Less

BMS Elite Performance Intake with Blue Filters - G80/G82 M3/M4 ...

T#:3886580

Part#: G8X-ELT-INTK-B

Ships on Sep 17, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The BMS Elite Performance Intake retains everything that's good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow 3.5" ducting and quality BMS inverted cone air filters to match.

Show More Show Less

BMS Drop-In Performance Air Filters - S58

T#:38621427

Part#: BMS-DAF-S58

Ships on Sep 17, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Burger Motorsports Performance S58 G8X BMW Drop-In Air Filters exceed OE standards, featuring oiled cotton media for enhanced airflow, effective contaminant filtration, and increased horsepower. These high-performance filters are washable and reusable, designed to last the lifetime of your vehicle. They easily install into your factory airboxes. Replaces OEM BMW part numbers: 🔹 Left: 13-71-8-095-807 🔹 Right: 13-71-8-095-805

Show More Show Less

High Performance Drop-In Air Filter Upgrade - Red - S58 G80, G82, G83...

2X Entries Into Our F80 M3 Sweepstakes

T#:5802144

Part#: VTT-S58-FILTER-R

Ships on Sep 16, 2026

$ 178.99 USD

Add to Wish List

Qty

$ 178.99 USD

Add to Wish List

Features: 50 States Emissions Legal Easy to install 15-30 minutes even for a novice Filters can be cleaned forever meaning never buy new filters Up to 13WHP gains Completely reversible if you ever want to remove VTT is proud to offer high-performance drop-in replacement filters for the 2021+ G8X M3/M4. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. On the dyno, VTT saw more than 13WHP gains with these filters and our Carbon Fiber intake Tops. These filters will also work perfectly with the stock tops. We recommend removing the pre-filter for best flow if the stock top is used. Red.

Show More Show Less

BMS Elite Performance Intake With Red Filters - G80/G82 M3/M4 ...

T#:3943329

Part#: G8X-ELT-INTK-R

Ships on Sep 17, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The BMS Elite Performance Intake retains everything that's good about the OEM intake including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with higher flow 3.5" ducting and quality BMS inverted cone air filters to match.

Show More Show Less

Replacement Filter

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:25805751

Part#: D401-0032

Ships on Sep 25, 2026

11% off MSRP $ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 63.99 USD

Add to Wish List

Qty

11% off MSRP

$ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 63.99 USD

Add to Wish List

Dinan Carbon Fiber Cold Air Intake - Matte - G80 M3, G82/83 M4, G87 M...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:13069370

Part#: D760-0063-B

In Stock

11% off MSRP $ 2,081.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,849.99 USD

Add to Wish List

Qty

11% off MSRP

$ 2,081.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,849.99 USD

Add to Wish List

With the most potent BMW inline-6 to date, the S58, the newest iteration of the M3 has set itself apart from its predecessors; given the option for AWD, a model first, the M3 breaks boundaries long maintained by the quintessential brand icon. Being the signature chassis Dinan modifies, development on the G8x needed to similarly raise the bar and distinguish itself from the pack; a difficult task but one we relished the opportunity to embark upon. After months of comprehensive design and validation, that journey has come to its conclusion for the first of those ambitious aspirations - the Dinan G8x Carbon Fiber Cold Air Intake. Equal parts function, sound, and beauty, the intake not only looks and sounds the part of something special but performs the part as well. With a 12% increase in airflow to the engine without any negative effects on inlet temperatures or pressure, the Dinan G8x system delivers on all fronts. Drawing in more unimpeded air for consumption yields more efficient turbos (less work to make the same power) with the capacity for greater power potential on modified builds. Central to the design and our obsessive-compulsive need for a symmetrical engine bay is a singular plenum that replaces the separated driver and passenger intake ducting on the stock setup. The combination of the two tracks into one enlarged and distinctive shared pathway allows 50% more volume to be achieved in this tight space in addition to simplifying the installation and improving the overall look. The center plenum gives way to enlarged airboxes that house 11% larger cotton air filters delivering superb filtration while maximizing flow. Feeding the filters are the factory grill inlets as well as additional cutouts on the top of each airbox lid. The semi-open design was analyzed extensively to ensure that these additional inlets had no ill effect on temperatures or flow. However, the secondary airbox passages do allow an avenue for the induction soundtrack to escape the confines of its former plastic prison for everyone's benefit. Whether under hard acceleration, deceleration, or just spooling the amplified sounds are sure to make an impression. Beyond improvements to flow and sound, the appearance of the Dinan G8x M2/M3/M4 intake system is unrivaled. One need not do more than take a casual glance to know that care was taken with the system to blend in naturally with the factory engine bay while sufficiently augmenting it to a tier above. Playing off the hard angular edges that are present throughout, the Dinan intake system carefully takes these queues and carries them throughout for a true OEM+ look and feel. A 2x2 twill carbon fiber weave is used throughout and available in either gloss or matte - a first for Dinan, further setting the intake apart from those that came before. Features: Reduced intake restriction for Increased turbo efficiency with greater power potential on modified builds More robust and aggressive induction soundtrack Improved throttle response More Flow: 12.4% increase over stock system (Stock: 815 CFM, Dinan: 916 CFM @ 28" H2O). Larger volume air boxes (26% larger than stock) and tubes/plenum (50% larger than stock) allowing an increased volume of air to be utilized 11% increase in filter area (stock: 65in², Dinan: 72in² per side) for optimum flow Multiple finish options: Available in 2x2 Gloss or Matte Twill Carbon (Matte Twill shown) Bolt-on installation NOTE: OEM M4 CSL strut brace is not compatible with the Dinan intake.

Show More Show Less

VTT “Game Changer” S58 Charge Air Cooler (PI RAW)

2X Entries Into Our F80 M3 Sweepstakes

T#:13266403

Part#: VTTS58CHARGEPIRA

Ships on Sep 16, 2026

$ 5,458.99 USD

Add to Wish List

Qty

$ 5,458.99 USD

Add to Wish List

This VTT charge air cooler is perfectly designed to reduce heat soak and increase power and efficiency! This increased airflow lets the engine breathe better and perform under hard and light acceleration. The team at VTT was able to take the limited space given to them by the factory, and add not only a larger more efficient core, but also much better-designed/flowing runners, and end tanks.

Show More Show Less

CANbus Flex Fuel Kit - Complete Kit W/ CABbus ECA & Universal Harness...

T#:49613450

Part#: G8XS58CANFFUH

Ships on Sep 17, 2026

$ 479.99

This product was last offered at the strikethrough price on
05-22-2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

VTT “Game Changer” S58 Charge Air Cooler (DI Only Coated) ...

2X Entries Into Our F80 M3 Sweepstakes

T#:13266406

Part#: VTTS58DICOAT

Ships on Sep 16, 2026

$ 5,637.99 USD

Add to Wish List

Qty

$ 5,637.99 USD

Add to Wish List

This VTT charge air cooler is perfectly designed to reduce heat soak and increase power and efficiency! This increased airflow lets the engine breathe better and perform under hard and light acceleration. The team at VTT was able to take the limited space given to them by the factory, and add not only a larger more efficient core, but also much better-designed/flowing runners, and end tanks

Show More Show Less

VTT “Game Changer” S58 Charge Air Cooler (Di Only Raw)

2X Entries Into Our F80 M3 Sweepstakes

T#:13266396

Part#: : VTT-S58-CHARGE

Ships on Sep 16, 2026

$ 5,512.99 USD

Add to Wish List

Qty

$ 5,512.99 USD

Add to Wish List

This VTT charge air cooler is perfectly designed to reduce heat soak and increase power and efficiency! This increased airflow lets the engine breathe better and perform under hard and light acceleration. The team at VTT was able to take the limited space given to them by the factory, and add not only a larger more efficient core, but also much better-designed/flowing runners, and end tanks.

Show More Show Less

Buger Motorsports 700HP Package - Blue Filters - BMW G8X S58 ...

T#:41255925

Part#: S58700HP-BLUKT

Ships on Sep 17, 2026

$ 2,075.99

This product was last offered at the strikethrough price on
05-23-2026

$ 2,066.00 USD

Add to Wish List

Qty

$ 2,066.00 USD

Add to Wish List

Unleash 700+ HP with safe, proven JB4 tuning on your locked ECU while maintaining reliability and drivability. This package delivers maximum power, optimized airflow, and real-time performance monitoring—all with easy plug-and-play installation and no permanent modifications.

Show More Show Less

VTT “Game Changer” S58 Charge Air Cooler (PI Coated)

2X Entries Into Our F80 M3 Sweepstakes

T#:13266409

Part#: VTTS58PICOAT

Ships on Sep 16, 2026

$ 5,847.99 USD

Add to Wish List

Qty

$ 5,847.99 USD

Add to Wish List

This VTT charge air cooler is perfectly designed to reduce heat soak and increase power and efficiency! This increased airflow lets the engine breathe better and perform under hard and light acceleration. The team at VTT was able to take the limited space given to them by the factory, and add not only a larger more efficient core, but also much better-designed/flowing runners, and end tanks.

Show More Show Less

VTT Carbon Fiber Intake Kit - G80 G82 G83 - S58

2X Entries Into Our F80 M3 Sweepstakes

T#:5802143

Part#: VTT-S58-CARBON-I

Ships on Sep 16, 2026

$ 881.99 USD

Add to Wish List

Qty

$ 881.99 USD

Add to Wish List

The BMW S58 G8X M3/4 Carbon fiber intakes! BMW did a wonderful job designing these intakes and we have found they are only slightly restrictive at elevated power levels, mostly due to the secondary filter inside, and the factory paper filter. The factory setup is EXTREMELY efficient with only a couple of small changes. With this in mind, VTT decided to just take their cues, and make factory-style carbon fiber intake tops with no secondary filters, and high flow cotton pre-oiled filters. These are 8 layers of 100% carbon not a single layer wrapped over plastic and they are 1.3MM thick with the VTT logo vacuum printed onto the tops, with a UV resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. 50 States Emissions Legal Easy to install 15-30 minutes even for a novice Beautiful Carbon Fiber finish really adds class to the S58 engine bay Filters can be cleaned forever meaning never buy new filters Up to 13WHP gains Completely reversible if you ever want to remove

Show More Show Less

BMW 5bar Sensor - B58/S58

T#:49822565

Part#: BMSB585BS

Ships on Sep 17, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.

Show More Show Less

BMS Front Mount Performance Silicone Intake - Blue Filters

T#:41255920

Part#: S58FMSILINT-BLU

Ships on Sep 17, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Elevate the capabilities of your G8x or F9x S58-powered BMW with an intake system engineered to true motorsport standards. The BMS Front-Mount Performance Intake completely eliminates the restrictive OEM induction setup, replacing it with a continuous 3.5" high-flow tract designed for maximum volumetric efficiency.

Show More Show Less

BMS Drop-In Performance Air Filters - S63/68

T#:38688928

Part#: BMS-DAF-S6368

Ships on Sep 17, 2026

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

Burger Motorsports Performance S63/S68 BMW X5, X5M, X7, and XM Drop-In Air Filters exceed OE standards, utilizing layered, oiled cotton media that maximizes airflow while effectively trapping contaminants and increasing horsepower. These high-performance filters are washable, reusable, and engineered to last the life of your vehicle. Easy to install, they fit directly into your factory airboxes for a quick upgrade.

Show More Show Less

Burger Motorsports S58 Port Injection Intake Manifold And Intercooler...

T#:46993579

Part#: BMSS58PIIM

Ships on Sep 16, 2026

Starting at $ 2,499.00 USD

Add to Wish List

Starting at $ 2,499.00 USD

Add to Wish List

When it comes to S58 intake manifolds it doesn't get any better than this. The Burger Motorsports intake manifold replaces your factory plastic S58 manifold and intercooler with a direct-fit, high-flow, high-strength aluminum manifold. The intercooler core is double the size of the factory unit, and the manifold features port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern. Includes high-quality o-rings and all required hardware. The BMS manifold has approximately 76.1% more internal volume than the OEM manifold

Show More Show Less

BMS Elite Performance Intake - Flat Black W/ Blue Filters

T#:39633149

Part#: G8XELTINFBBF

Ships on Sep 17, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

AMS Performance BMW G8X M2/M3/M4 S58 Air Intakes (Open Top Airbox w/ ...

T#:49752776

Part#: 48.08.0001-1

Back Ordered

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

Unlock the full potential of your M2, M3, or M4 with these Air Intakes from AMS Performance.

BMS Elite Performance Front Mount Intake - Red - G8X S58

T#:12413839

Part#: S58FMINTAKERED

Ships on Sep 17, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Red Filter with Front Mount Relocation. An intake system worthy of your S58 G80 M3 and G82 G83 M4! The Front Mount (behind the grille) BMS Elite G8x S58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.

Show More Show Less

BMS Elite Performance Front Mount Intake - Blue - G8X S58

T#:12413838

Part#: S58FMINTAKEBLUE

Ships on Sep 17, 2026

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Blue Filter with Front Mount Relocation. An intake system worthy of your S58 G80 M3 and G82 G83 M4! The Front Mount (behind the grille) BMS Elite G8x S58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.

Show More Show Less

G8X M3 M4 Experience Package

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:30198000

Part#: G8X-M3M4-E-GBGA

Back Ordered

9% off MSRP $ 6,434.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,849.99 USD

Add to Wish List

Qty

9% off MSRP

$ 6,434.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,849.99 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go-to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders, the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience. Includes Dinan Exhaust Dinan Intake Dinan Strut Brace Dinan Pedal Covers Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +6 HP and +5 lb-ft of torque (Exhaust) Smoother, louder,and sportier sound (Exhaust + X-Pipe) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonators between the secondary catalysts and rear muffler for increased volume (X-Pipe) Between 11 and 16.6 pounds lighter than the stock depending on the package(Exhaust + X-Pipe and Strut Brace) Reduced intake restriction for Increased turbo efficiency with greater power potential on modified builds (Intake) More robust and aggressive induction soundtrack (Intake) Improved throttle response (Intake) Increased rigidity for sharper handling and reduced flex (Strut Brace) Elevated and stylish high-performance look to the interior (Pedal Pads) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge

Show More Show Less

AMS Performance BMW G8X M2/M3/M4 S58 Air Intakes (Carbon Fiber Lids w...

T#:49752779

Part#: 48.08.0001-2

In Stock

$ 1,499.99 USD

Add to Wish List

Qty

$ 1,499.99 USD

Add to Wish List

Unleash the beast of your S58 engine with these air intakes from AMS Performance.

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Sep 17, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Sep 16, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Water/Methanol Injection Hose - 20'

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

WMI Inline Filter

T#:21176933

Part#: BMS-WMI-FIL

Ships on Sep 17, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

BMS Water/Methanol Port Injection (WMI) Kit - S58

T#:21308440

Part#: WMIK-S58

Ships on Sep 16, 2026

Starting at $ 1,899.00 USD

Add to Wish List

Starting at $ 1,899.00 USD

Add to Wish List

The Fuel-It! S58 BMW Port Injection Kit is the ultimate fueling solution for your S58 powered BMW. It adds six supplemental low-pressure fuel injectors allowing fueling of up to 1000+ whp using water/methanol blends. This kit includes stainless steel BMS Elite braided lines. They feature an inner Teflon seal for leak-free operation, stainless steel braid, a black outer nylon mesh for abrasion resistance and a stealthy look. These lines not only look great they are also equipped with BMS Elite AN fittings and can withstand extreme pressure and temperature conditions. The included Burger Motorsports DDP 5800 water/methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. Stealth Tank for G20 G22 & G80 M3 & G82 M4 BMW tucks neatly in the side pocket of your trunk! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Features & Benefits Included tank leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank Includes 2-way vented black plastic cap Includes all mounting hardware What's included: (1) Fuel-It! S58 Billet Fuel Rail (6) 550cc Fuel Injectors (1) 15' Stainless steel braided water/Methanol line with black nylon sheathing (1) BMS Water/Methanol Pump (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) -6AN ORB fitting (1) -6AN ORB plug (2) 1/8" NPT plugs (3) 14 x 1 Stainless steel screws to secure the rail to your manifold (1) Injector installation jig (1) 8 x 3/4" screw for the installation jig (1) 21/64 drill bit to open the factory injector bosses (1) Superlube® (1) BMS JB4 Port Injection Controller (7) Wire nuts (1) inline fuse holder (1) 12V Relay (1) 15' of red power wire (1) 15' of black power wire 3.5 Gallon Tank: What's included: (1) 3.5 Gallon Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of 1/4" nylon meth line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (1) Billet 1/4 push male to -4AN male 90º (pump out) (1) 1/4 push male to female 90º (pump in) (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Show More Show Less

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

T#:21176934

Part#: BMS-WMI-SOL

Ships on Sep 17, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

BMS 3.5 Gallon Stealth Water/Methanol Injection (WMI) Tank

T#:20815187

Part#: BMW35G28

Ships on Sep 16, 2026

Starting at $ 279.00 USD

Add to Wish List

Starting at $ 279.00 USD

Add to Wish List

Safe, sleek, and ready to install out of the box! Your choice of color and accessories! This water/methanol injection (WMI) tank is a completely custom design that neatly hides away in the left side trunk cavity found in most G20 G22 & G80 M3 & G82 M4 BMW vehicles. The pump mounts directly to the back of the tank allowing for a quick, clean, and completely stealth installation. The bottom of the tank includes a rear sump allowing for consistent performance even as the tank drains. Includes 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) with 1-way check valve (ES4714530) Burger Motorsports DDP 5800 water methanol alcohol Injection pump (ES4714532) Features & Benefits Leaves trunk completely clear for full use of space Super low profile design tucks neatly into the existing left side trunk cavity 3.5 Gallon (13.25 liters) capacity Available in transparent white for visually checking fluid levels and opaque black for a stealth appearance. DDP 5800 pump mounts directly to the tank (pump sold separately) Tank dimensions: L 20.5" x W 11" X H 13.5" What's included: (1) Stealth Tank (1) 2-way vented black plastic filler cap (1) brass Compression Tube Fitting for 1/4" Tube OD x 1/4 NPT Male (1) 18" of line (2) Powder coated stainless lower bracket (2) Rubber lower bracket grommets (2) BMS custom bell washers (2) Stainless Steel Flanged Button Head Screws M6 x 1 mm Thread, 8 mm Long (1) Plastic upper bracket (2) Self Tapping upper bracket screws 1/4" Size, 1-1/2" Long (4) Pump Screws - Phillips Passivated Stainless 10-32 Thread, 1-1/4" Long (2) 1/4 push male to female 90º to pump in (1) Button Head Hex Drive Screw 18-8 Stainless M8 x 1.25 Thread Size, 15mm Long (bracket to chassis) (1) Nylon lock nut - M8 x 1.25 mm Thread, 9.5 mm High (bracket to chassis) (1) Button Head Hex Drive Screw Passivated 18-8 Stainless Steel, M10 x 1.50 mm Thread, 16mm Long (bracket to chassis)

Show More Show Less

Super Atomizing Water/Methanol Injection Nozzles

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Sep 29, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW G82 M4 S58 3.0L

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results