Home
Suspension
Control Arm Replacements & Upgrades

BMW Control Arm Replacements & Upgrades for BMW G82 M4 S58 3.0L

Clear BMW chassis

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

OEM Lemforder Trailing Arm Ball Joint - E82/E88 E9X F22/23 F3X F8X ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:377180

Part#: 33326792553

Ships in 6 Business Days

$ 34.99

This product was last offered at the strikethrough price on
04-25-2026

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Ball joints begin to pop and rattle after a long period of wear and tear. An OEM Lemforder ball joint is the perfect replacement to ensure complete reliability eliminate any noises from the suspension.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Turner Adjustable Toe Arms w/ Eccentric Lockout Plates - F80, F82, G8...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:587754

Part#: 23672TMS03

In Stock

Starting at $ 432.99 USD

Add to Wish List

Starting at $ 432.99 USD

Add to Wish List

Eliminates any unwanted movement in the rear end associated with the the cumbersome factory eccentric toe adjustment point, opening up a wider range of adjustment for your alignment needs!

Performance Adjustable Rear Traction Links - BMW F8X M2 M3 M4, G8X M3...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5471050

Part#: 00501TMS08

In Stock

$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD

Limited Qty Sale

Add to Wish List

The stock Genuine BMW rear trailing arms (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Traction Links increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Thanks to their adjustable design, these allow fine tuning of rear bumpsteer and anti-squat characteristics. These arms are designed for use in high-performance street and race vehicles. These traction links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA

Show More Show Less

Performance Adjustable Rear Toe Links - BMW F8X M2 M3 M4, G8X M3 M4 B...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5471051

Part#: 00501TMS09

In Stock

Sale - Save 5% $ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD

Add to Wish List

The stock Genuine BMW rear toe links (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Toe Links increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustment allows you to maximize grip on a track car and extend tire life on a street car. The factory rear toe arms utilize an eccentric bolt and washer for adjustment and lack precision and range. These toe links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. Best if tightened to 73.7 ft. lbs. (100 N/M). DO NOT OVERTORQUE! ECS is not liable for any issues due to overtorque. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA

Show More Show Less

Performance Adjustable Front Tension Rods - Pair - G8X M3 M4 Base & C...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5471046

Part#: 00501TMS04

In Stock

$ 672.99

This product was last offered at the strikethrough price on
05-03-2026

$ 575.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 672.99

This product was last offered at the strikethrough price on
05-03-2026

$ 575.99 USD

Limited Qty Sale

Add to Wish List

The stock Genuine BMW front "upper" control arms (31108095667 & 31108095668) are great for standard daily driving and occasional spirited driving, but tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics. In order to address this issue, Turner now offers new Performance Front Tension Rods with upgraded FK Spherical Bearings! These tension rods offer multiple benefits over stock control arms, helping to keep your BMW under control and on the track. The biggest upgrade over the stock control arm is the replacement of the rubber bushing with JMX hardened Teflon-lined low-friction FK Spherical Bearings. This allows for smooth control arm articulation, without the standard mushy feel you'd expect from rubber bushings. As a result, you get a more responsive feel that inspires confidence lap after lap! The PTFE liner is chemically bonded to the inner diameter of the race. The liner offers a very high load carrying capacity and has greatly increased dynamic wear characteristics, offering robust reliability for both street and track use. Another benefit of these Performance Tension Rods is increased caster adjustment, allowing precise alignment for optimal turn-in response and to compensate for variances between left and right caster. Adjustable Tension Rod Features: Gun drilled and Blue Anodized 2024 Aluminum links to reduce unsprung weight Rotating 6061-T6 Aluminum Clamp design Hardened JMX high misalignment low friction 3-piece Teflon lined FK Heim joints/rod ends Stainless steel anti-dive spacers ASTM A574 socket head cap bolts are used for maximum articulation with a minimum tensile strength of 170,000 psi Sold as a pair. Made in the USA.

Show More Show Less

Performance Adjustable Front Lower Control Arms - Pair - G8X M2 M3 M4...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5471061

Part#: 00501TMS020

In Stock

Sale - Save 3% $ 910.99

This product was last offered at the strikethrough price on
06-14-2026

$ 883.66 USD

Add to Wish List

Qty

Sale - Save 3%

$ 910.99

This product was last offered at the strikethrough price on
06-14-2026

$ 883.66 USD

Add to Wish List

The stock Genuine BMW front "lower" control arms (31108095665 & 31108095666) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics. In order to address this issue, Turner now offers new Performance Adjustable Front Lower Control Arms! These control arms offer multiple benefits over stock control arms, helping to keep your BMW under control and on the track. In order to get the most out of your BMW M3/M4, these new control arms provide roll center, camber, and track width adjustment to dial in your alignment for optimal handling! Additionally, the ball joint angle has been corrected to allow for full articulation. Stainless Steel spacers are provided to correct roll center for lowered vehicles. The use of FK Rod Ends and High Misalignment Spherical Bearings eliminates the flex and binding found in the OEM control arms while allowing smooth articulation. Another great feature of these control arms is the Double Adjuster Lock Down. This allows camber and track width settings to be adjusted and locked in without the use of finicky jam nuts. This double adjuster is machined from 4130 Chromoly; gun-drilled to reduce weight, then electroless nickel plated for corrosion resistance. A ride height sensor bracket is also integrated to maintain factory ride height sensor location, regardless of the length of the arm to keep BMW's chassis electronics happy. Front Lower Control Arm Features: Lightweight 6061-T6 Billet Aluminum Electroless nickel plated 4130 Chromoly Double Adjuster for quick adjustment Correct ball joint angle for full articulation Rotating Clamp design allows for easy access to lock down alignment settings Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends Multiple size Stainless Steel roll center spacers for precise adjustment Sold as a pair. Made in the USA.

Show More Show Less

OEM Lemforder Camber Adjustment Bushing - 33326770829 - F80 M3, F82 M...

The lowest arm housing the coil spring.

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:399341

Part#: 33326770829

In Stock

$ 18.99

This product was last offered at the strikethrough price on
04-06-2026

$ 13.48 USD

Add to Wish List

Qty

$ 13.48 USD

Add to Wish List

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F80 M3,F82 M4,F83

Show More Show Less

Rod End Boot (14-18mm) - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599632

Part#: RERS3

In Stock

$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.

Show More Show Less

Rear Upper Control Arm - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:594833

Part#: 33322284777

In Stock at Vendor

$ 290.28 USD

Add to Wish List

Qty

$ 290.28 USD

Add to Wish List

Lower Rear Control Arm - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:594832

Part#: 33322284534

In Stock at Vendor

$ 272.47

This product was last offered at the strikethrough price on
05-11-2026

$ 270.84 USD

Add to Wish List

Qty

$ 270.84 USD

Add to Wish List

Replacing your rear lower rear control arms on your ///M will often restore proper handling characteristics to your vehicle in the event that the bushings are worn.

Select Vehicle

Purpose

Category

Control Arm Replacements & Upgrades
- Front Control Arm (2)
- Rear Control Arm (6)

Brand

Price

Special Offers

On Sale (2)

Shipping