MINI

Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.

• Enhanced strength and safety
• Improved pit stop times
• Simplified wheel installation and removal
• Versatility with extended length wheel studs
• Reduced wear on hub threads
• Long-term durability and safety
• Simplified maintenance and improved efficiency

• The easiest software upgrade in the world!
• Dyno-developed power and torque gains - up to 15hp!
• Compatible with most-common performance upgrades
• Restore to stock at any time
  
• The Shark Injector installs through the OBD-II port in your car no need to remove your ECU and ship it! The Shark Injector software re-maps the fuel and ignition data at part-throttle and wide-open throttle to take advantage of high octane fuel. The Shark Injector was developed by Jim Conforti, whose BMW programs are generally regarded as the best performance software that money can buy. The Mini software was developed on the dyno to give you more horsepower and torque, quicker and smoother throttle response, a higher rev limit, and removal of the top speed limiter. The Shark Injector is compatible with many different modifications: 16-18% supercharger pulleys, cold air intake kit, and cat-back exhaust so there is no need to re-tune your car after every modification. This is the easiest software tool available for the Mini Cooper S with only a battery charger required for installation. Among the other benefits is the ability to restore your car back to stock at any time. Choose from 91 or 93 minimum octane.
   

  Shark Injector Info Center

  Shark Injector FAQ

  Mini Shark Injector installation instructions
  This item fits the following BMWs:
  2002-2006 R53 MINI MINI Cooper S (manual transmission only)

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

This kit contains:

4 Beru MINI spark plugs - 12ZR6-SPP2 -1
4 Bavarian Autosport High-Performance Coils
One packet of dielectric grease (AGS)
From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

This kit contains:

4 Beru MINI spark plugs - 12ZR6-SPP2 -1

4 Bavarian Autosport High-Performance Coils

One packet of dielectric grease (AGS)

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Unlock the full potential of your MINI R52 R53 W11 1.6L engine with the Shark Injector, providing a hassle-free solution to boost power and torque. Dyno-tuned by BMW legend Jim Conforti, this software is tailored for high-octane (93+) pump gas, enhancing mid-range torque and high-RPM horsepower. Experience improved performance, driveability, and responsiveness without compromising safety.

• Easy Installation: Plug-and-play design ensures a straightforward installation process, typically completed within an hour.
• Smart Tuning: The Shark Injector fine-tunes fuel and spark maps, raises the rev limit, and replaces stock software parts, optimizing your MINI's performance.
• Dyno-Developed Gains: Enjoy up to 15 hp power increase, with enhanced engine response and a higher rev limit by 200 RPM.
• Compatibility: Works seamlessly with modifications like a 16-18% crank pulley, intake, and cat-back exhaust, providing flexibility for further enhancements without re-tuning worries.
• Versatile Use: Ideal for part-throttle and wide-open throttle acceleration, offering a vastly improved driving experience.
• Safety First: Shark Injector software is compatible only with NORTH AMERICAN SPEC BMWs, ensuring proper operation and safety.