MSD Performance Coil Pack for MINI

Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.

This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.

Kits Include:

• MSD Coil Pack
• MSD Wire Set - Red
• Inductance: 7mH
• Maximum Voltage: 36,000 Volts
• Primary Resistance: 0.51 OHMs
• Secondary Resistance: 12K OHMs
• Turns Ratio: 77:1

Key Benefits:

• Upgraded performance over stock coil pack
• Enhances ignition efficiency and engine performance
• High voltage output of 36,000 volts for stronger sparks
• Low primary resistance of 0.51 OHMs for efficient energy transfer
• High secondary resistance of 12K OHMs for improved performance
• Durable construction for long-lasting use

The Mini is considered a car that always brings a smile to ones face with its playful look and particularly its position on the road, which is reminiscent of driving a go-kart. The engineers from Akrapovic prepared solutions for the little devil that further increase the performance of the Mini Cooper S and the Cooper S Cabrio as well make it sound even more appealing. Just by looking at the rear, we can see that it's an Akrapovic - namely, the rear boasts a dual exhaust system outlet of a larger diameter, shaped like racing exhausts. The homologated stainless steel aftermarket Evolution exhaust system with an integrated resonator and end muffler is equipped with adjustable tail pipes made of titanium or carbon fiber. The most demanding customers can also upgrade the Evolution exhaust system by using a down pipe with catalyst.

The Akrapovic exhaust system also improves sound characteristic, reduces drone and vibrations and makes driving even more enjoyable. The Evolution system, with the optional down pipe, greatly improves the motor's performance at all revolutions, which is evident from the performance chart. The system offers an additional 7,6 HP and 7 Nm. Additionally, improvements to weight are not negligible, since the Akrapovic exhaust system, made of stainless steel, together with the optional down pipe, weights 3,67 kilograms less than a stock exhaust system. Part # ME-MIN/TI/1H.

Evolution system, homologated:

• exhaust system with integrated resonator and end muffler
• titanium or carbon fiber tail pipes
   

   Hard facts:

• plus 2,4 HP (at 5.500 rpm)
• plus 5,6 Nm (at 3.530 rpm)
• minus 2,3 kg
• Dyno Chart
  
  Evolution system with optional down pipe:
• down pipe (for off road use only)
• exhaust system with integrated resonator and end muffler
• titanium or carbon fiber tail pipes
  
  Hard facts:
• plus 7,6 HP (at 5.900 rpm)
• plus 7 Nm (at 3.400 rpm)
• minus 3,67 kg

Dyno Chart

​This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.

Not for sale outside the US or Canada.

This item fits the following MINIs:
2006+ R56 MINI MINI Cooper S
2007+ R57 MINI MINI Cooper S Convertible