Staggered Performance Wheel Sets for MINI

Clear BMW chassis

The term Staggered refers to running two pairs of wheels with differing widths on either end of the vehicle. For example, you may want to run an 8.5' wide wheel in the front while running a 10' wheel in the rear. This can be done to increase traction in the rear by increasing the contact patch, but will also provide a dramatic contrast when running deep dish wheels.

Sort By:

19" BBS CI-R Bronze - Staggered Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5484813

Part#: CI2402MBZKT

Ships on Jun 19, 2026

$ 3,907.99 USD

Add to Wish List

Qty

$ 3,907.99 USD

Add to Wish List

BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. One Piece Counter Pressure Cast Wheel with Flow-formed rim - Back-milled spoke area - Featuring stainless steel rim protector - Weight optimized by FEM analysis. Staggered set of BBS CI-R Wheels - Bronze Front - 19x8.5 ET35 72.5 CB FPS Rings Rear - 19x9.5 ET40 72.5 CB FPS Rings

Show More Show Less

19" BBS CI-R Nurburgring Edition - Staggered Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5484812

Part#: CI2402NEKT

Ships on Jun 19, 2026

$ 3,907.99 USD

Add to Wish List

Qty

$ 3,907.99 USD

Add to Wish List

BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. One Piece Counter Pressure Cast Wheel with Flow-formed rim - Back-milled spoke area - Featuring stainless steel rim protector - Weight optimized by FEM analysis. Staggered set of BBS CI-R Wheels - Nurburgring Edition Satin Black with Red Lip ring Front - 19x8.5 ET35 72.5 CB FPS Rings Rear - 19x9.5 ET40 72.5 CB FPS Rings

Show More Show Less

19" Style LM Wheels - Staggered Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:403173

Part#: LMDSPK19SKT

In Stock

$ 6,899.00 USD

Add to Wish List

Qty

$ 6,899.00 USD

Add to Wish List

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Silver with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling/pulling.

Specs: