ECS Tuning Silicone Turbo Inlet Hose – MINI Cooper S/JCW N14 (R55-R59)

Upgrade your MINI Cooper N14 with our high-flow silicone turbo inlet hose, featuring increased internal volume for greater airflow, a smooth interior finish for an uninterrupted flow path, and more available air for your turbo to consume, resulting in enhanced performance and throttle response.

Unlike the factory plastic inlet hose, which degrades over time and was never engineered with performance in mind, the ECS Tuning replacement features a durable, 4-ply silicone construction with wire reinforcement to handle higher temperatures and boost levels. Reinforced sections help prevent flex and collapse under load, and a smooth internal profile with a counterbored outlet reduces turbulence for optimized airflow to the turbocharger.

ECS Tuning also addresses a known issue where the OEM hose can walk off the turbo inlet and ingest the included gasket, often leading to premature turbo failure. This upgraded design provides a much more secure fit and peace of mind for performance-minded MINI owners.

Product Features

Constructed from heavy-duty, 4-ply fiberglass-reinforced silicone

Designed to resist collapse, distortion, and degradation from heat, oil, and fuel exposure

Smooth interior walls and gradual taper ensure unimpeded, efficient airflow

Includes spacers/adapters to accommodate factory or common upgraded turbo sizes

Gloss black finish adds a clean, high-performance appearance to the engine bay

Stainless steel smooth-band hose clamps are included for secure installation

Engineered to handle continuous operating temperatures up to 250°F

Direct replacement for the OE turbo inlet hose—no tuning required

Kit Includes

(1) Silicone turbo inlet hose
(2) Silicone turbo inlet rings for size adaptation
(3) Smooth-band stainless steel hose clamps
Engineering and Development
Designed, tested, and quality-inspected at ECS Tuning’s in-house R&D facility in Wadsworth, Ohio. Utilizing precision tools like FARO laser scanning, SolidWorks 3D CAD modeling, and in-house rapid prototyping, ECS ensures perfect fitment and long-term durability.

Installation Notes
Installation is simple and fully reversible. Remove the stock inlet hose and install the ECS silicone hose using the included clamps and spacers as needed. No permanent modifications required.

Not legal for sale or use in California on any pollution-controlled motor vehicle in accordance with the California Air Resources Board (CARB).

M7 Speed Silicone Intake Hose for N14 Turbocharged MINIs

Elevate your MINI's performance and style with the M7 Speed 100% silicone four-ply fiber reinforced intake hose. This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds the coveted under-hood WOW factor that MINIs need.

M7 Speed proudly introduces its newly developed intake hose designed for all MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose ensures a seamless integration into your MINI's engine bay while providing exceptional performance.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size. This means you can install it without any modifications, ensuring no disruption to the PCV electrical connection and eliminating the risk of initiating a DTC code (Check Engine Light). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions for hassle-free setup.

Crafted from 100% silicone materials resistant to oil and most chemical damage, this intake hose is designed for high-temperature continuous service up to 300°F (149°C). Its four-ply fiber reinforced construction ensures maximum strength and durability. With no modifications or cutting required for installation, this hose offers a 33% larger inside flow volume compared to the stock part, promoting better airflow to the turbocharger.

Key Features:

• Direct OE replacement part
• Superior durability
• Improved airflow
• Virtually unlimited service life
• Retains stock PCV connection location and size
• Easy DIY installation
• Available in four standard M7 colors
• Dimensions: 2.75” (70mm) ID at the MAF sensor, 1.97” (46mm) ID at the turbo inlet

MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is an essential upgrade for Mini enthusiasts looking to enhance the performance of their MINI N18 1.6L engine. This high-quality charge pipe, in sleek black finish, is designed to increase airflow and reduce turbo lag for improved throttle response and power delivery.

Crafted with precision engineering and durable materials, the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black ensures a perfect fit and reliable performance. It effectively increases the efficiency of the intercooler system, allowing for cooler and denser intake air for better engine performance.

• Enhances performance of MINI N18 1.6L engine
• Increases airflow and reduces turbo lag
• Improves throttle response and power delivery
• Sleek black finish adds aesthetic appeal
• Crafted with precision engineering and durable materials
• Ensures perfect fit and reliable performance

Investing in the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is a smart choice for Mini owners looking to unlock the full potential of their vehicle's engine.

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit to fully upgrade your intake system with matching silicone parts for your engine bay.

Introducing M7 Speed’s newly developed 100% silicone, four-ply fiber-reinforced intake hose for MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. It not only boosts performance but also adds a striking under-hood WOW factor that MINIs crave.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This means no disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code). The kit includes three stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, which has one large PCV vent hose connected from the intake hose to the cam cover.

Features:

• Made from 100% silicone, resistant to oil and most chemicals
• Designed for continuous service at high temperatures (300°F [149°C])
• Four-ply fiber-reinforced construction for maximum strength and durability
• Retains stock PCV connection location and size for easy installation
• No modifications or cutting required for installation
• 33% larger inside flow volume compared to the stock part
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger
• Available in four standard M7 colors
• 2.75” [70mm] ID at the MAF sensor and 1.97” [50mm] ID at the turbo inlet
• Easy DIY installation

Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as other popular M7 silicone hose products, this OE replacement elbow offers enhanced durability and performance.

Key Features:

• Direct factory OE replacement with no modifications required
• Smooth and larger bend compared to the convoluted molded rubber OE part
• Resistant to age, oil reaction, high boost applications, and environmental damage
• Designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure
• Includes one silicone elbow and two high-quality lined stainless steel clamps
• Easy installation with basic hand tools
• Currently available only in BLACK

Upgrade your MINI's performance with the M7 Speed Cold Side Lower Intercooler Elbow, designed to replace the OE rubber elbow prone to failure over time. With its durable silicone construction and easy installation, this elbow is perfect for high-performance MINIs running increased boost.

M7 Pre-Intercooler Charge Pipe for MINI

Upgrade your MINI's performance with the M7 Pre-Intercooler Charge Pipe, a silicone hose designed to replace the stock piping between the turbocharger's outlet and the intercooler's inlet. Unlike OEM parts that feature restrictive piping and baffles, this charge pipe ensures uninterrupted airflow for enhanced turbocharger sound and performance.

Benefits:

• Smooth inner walls and mandrel bends allow uninterrupted airflow
• Enhances turbocharger sound for a more exhilarating driving experience
• Dyno-tested gains of 3.6 horsepower and 11.3 ft-lb of torque at the wheels
• Available in BLACK, RED, and BLUE to complement your MINI's engine bay
• Proudly made in the USA for quality assurance

BMW F56 B46 B48 JCW Charge And Boost Pipes are designed to elevate your Mini Cooper's performance to new heights. Tailored specifically for the F55, F56, F57, and F54 models, these pipes are crafted to enhance airflow and durability, delivering optimal turbocharged efficiency. Turner Motorsport's Charge and Boost Pipes minimize restrictions, resulting in improved throttle response and increased power output. Upgrade your Mini with these precision-engineered pipes to enjoy superior turbo performance and a sleek, high-quality appearance.

• Enhanced Airflow: Boosts airflow for optimal turbocharged efficiency.
• Increased Power Output: Reduces restrictions for better throttle response and power.
• Durable Construction: Engineered for lasting performance and reliability.
• Sleek Design: Adds a high-quality, attractive look to your Mini Cooper.

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI's performance with the newly developed M7 Speed 100% silicone four-ply fiber-reinforced intake hose. Designed as a direct OE replacement part for all MINIs equipped with the N14 turbocharged engine, this hose offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds a striking under-hood WOW factor that MINIs desperately need.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part only fits MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.

MINI N14 N18 1.6L High Flow Pre-Intercooler Charge Pipe - Red is designed to replace the stock piping between the turbocharger's outlet and the intercooler's inlet. This silicone hose eliminates restrictive factory piping and baffles, allowing for uninterrupted airflow and improved performance.

• Enhances airflow from turbocharger to intercooler
• Smooth inner walls and mandrel bends for optimal air path
• Increases horsepower and torque
• Reveals the pure sound of the turbo
• Made from durable silicone material
• Available in multiple colors: Black, Red, Blue, Green
• Proudly made in the USA

Elevate your Mini's performance with the combined strength of the M7 Speed COLD SIDE Intercooler Elbow Kit and the sought-after HOT SIDE Charge Pipe, both in an eye-catching Red hue. Engineered for superior airflow and reduced pressure drop from the turbo to the throttle body, this intercooler pipe kit is your key to unlocking enhanced power for your vehicle. Crafted from premium four-ply fabric-reinforced 100% silicone material, this kit not only boosts power and throttle response but also adds a striking visual appeal under your hood. Bid farewell to high boost failures common with OE parts. Furthermore, the M7 kit eliminates the OE hose side muffler and cold side sound chamber, resulting in improved throttle response and increased power in the mid-range to top-end.

Key Benefits:

• Maximizes airflow for increased power
• Enhances throttle response
• Eliminates high boost failures seen in OE parts
• Improves under-hood aesthetics