BMW Drivetrain Parts for MINI

Elevate your MINI Cooper S or JCW driving experience with our passenger side high-performance replacement axle, meticulously crafted for manual transmissions in R53 and R52 models.

These are the very same axles trusted by our racing team, ensuring that they meet the rigorous demands of high-performance racing. With an impressive power rating of 450 horsepower, you can be confident in their ability to deliver exceptional performance while maintaining robustness.

What's more, we back our axles with an exceptional 2-year unlimited warranty, providing you with the ultimate assurance in their quality and durability.

It's worth noting that these axles are rebuilt units, and as a result, they may exhibit minor marks acquired during the rebuilding process. Additionally, their appearance may feature a variety of paint colors, which can occasionally include blue hues.

Experience the difference and upgrade your MINI Cooper with race-proven, high-performance axles, purpose-built for superior performance and reliability.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The factory dual-mass flywheel in MINI N14 and N18 engines is engineered for comfort, minimizing drivetrain vibrations and smoothing out gear transitions. However, that comfort comes at a price—28.3 lbs. of rotational mass that dulls throttle response, slows acceleration, and hampers precise rev-matching. Dual-mass flywheels are also notoriously prone to failure under high-performance or tuned driving conditions, and their replacement costs can be steep.

The ECS Performance Lightweight Flywheel Kit eliminates these compromises with a precision-engineered, single-mass flywheel that delivers true enthusiast-grade performance. Weighing in at just 18.8 lbs, this flywheel sheds nearly 10 lbs. of rotating mass compared to OEM—instantly sharpening throttle response, improving clutch feel, and delivering quicker acceleration that transforms the driving dynamics of your MINI.

Performance-Oriented Design: This flywheel is specifically engineered to work with OE and aftermarket unsprung clutch discs. While dual-mass setups provide damping on stock vehicles, switching to a single-mass flywheel with an unsprung disc introduces more direct engagement—ideal for spirited daily driving or track-ready builds. Expect a more aggressive, performance-focused clutch feel.

Key Features:

Lightweight Construction: Sheds nearly 10 lbs. of rotating mass for faster revs and improved acceleration

4140 Chromoly Steel: Heat-treated to HRC 28–32 for outstanding strength, wear resistance, and dimensional stability

Precision-Balanced: Exceeds OEM G16 specification (175 g-mm) for smooth, high-RPM operation

Black Oxide Coating: Offers corrosion resistance and a professional finish

OE-Compatible Fitment: Designed to work seamlessly with N14 architecture clutch kits

SFI 1.1 Certified: Proven safe and reliable under extreme operating conditions

Optimized Step Height: Ensures maximum clutch clamping force and long-term durability

Performance Gains:

OEM Dual-Mass Flywheel Weight: 28.3 lbs

ECS Single-Mass Flywheel Weight: 18.8 lbs

Weight Savings: Nearly 10 lbs of reduced rotational mass

Results: Sharper throttle response, more precise rev-matching, and a more engaging driving experience

Kit Includes:

ECS N14/N18 Lightweight Performance Flywheel

South Bend Stage Two “Daily” Clutch Kit

Pilot Bearing

Throw-Out Bearing

Clutch Alignment Tool

(6) Genuine MINI Flywheel Bolts