BMW Engine Parts for MINI

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

MSD Performance - Corporate Logo
T#:31324148
Part#: 8239KT2KT
In Stock
$ 268.99 USD
Free Shipping on orders $49 and up

MSD Performance Coil Pack for MINI

Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.

This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.

Kits Include:

  • MSD Coil Pack
  • MSD Wire Set - Red
  • Inductance: 7mH
  • Maximum Voltage: 36,000 Volts
  • Primary Resistance: 0.51 OHMs
  • Secondary Resistance: 12K OHMs
  • Turns Ratio: 77:1

Key Benefits:

  • Upgraded performance over stock coil pack
  • Enhances ignition efficiency and engine performance
  • High voltage output of 36,000 volts for stronger sparks
  • Low primary resistance of 0.51 OHMs for efficient energy transfer
  • High secondary resistance of 12K OHMs for improved performance
  • Durable construction for long-lasting use
Show More Show Less
TurboSmart - Corporate Logo
T#:590053
Part#: TS-0223-1093
In Stock
10% off MSRP $ 350.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 315.99 USD
Free Shipping
10% off MSRP
$ 350.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 315.99 USD
Free Shipping
TurboSmart - Corporate Logo
T#:590054
Part#: TS-0223-1293
In Stock at Vendor
10% off MSRP $ 309.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 278.99 USD
Free Shipping
10% off MSRP
$ 309.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 278.99 USD
Free Shipping

MSD Performance - Corporate Logo
T#:15777320
Part#: 32879
In Stock
11% off MSRP $ 152.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 135.99 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 152.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 135.99 USD
Free Shipping on orders $49 and up

Revitalize your Mini's performance with these spark plug wires and boots, designed to restore power and ensure smooth engine operation. Replace them at 60,000-mile intervals to maintain optimal performance. If you experience low spark or misfires and it's not due to the coil or spark plugs, faulty wires may be the culprit. Don't let rust buildup hinder performance—replace these wires to ensure happy motoring and reliable spark.

  • Restores power and performance to your Mini
  • Recommended replacement at 60,000-mile intervals
  • Addresses issues such as low spark and misfires
  • Prevents rust buildup for consistent spark delivery
  • Includes plug wires for cylinder 1
Show More Show Less

TurboSmart - Corporate Logo
T#:22591972
Part#: TS-0551-1011
In Stock
10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD
Free Shipping on orders $49 and up

The Gen V WG38 Ultra-Gate 38 external wastegate is your cost-effective, high-performance solution. This 38mm external wastegate is meticulously designed for hassle-free bolt-on applications that make use of the 2-bolt flange.

Show More Show Less
TurboSmart - Corporate Logo
T#:598851
Part#: TS-0720-1006
Ships on Aug 10, 2026
10% off MSRP $ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 60.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping on orders $49 and up

TurboSmart - Corporate Logo
T#:4921469
Part#: TS-0551-1012
Ships on Aug 10, 2026
10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD
Free Shipping
10% off MSRP
$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD
Free Shipping
The Turbosmart GenV range is the Highest Flowing Wastegate range in the World. The GenV WG38 UltraGate38 External Wastegate is a Motorsport proven, cost-effective external wastegate. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap, and base for easy, 360-degree optional routing of reference hoses, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.
Show More Show Less
TurboSmart - Corporate Logo
T#:23615502
Part#: TS-0101-1101
In Stock at Vendor
10% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 112.99 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 112.99 USD
Free Shipping on orders $49 and up

Upgrade your Mini's turbocharger system with the All New Boost Tee by Turbosmart, a redesigned and more compact version of the beloved Boost Tee. With a 33% smaller and ergonomic design, it retains the beloved features like the Gate Feature for optimal boost response, anti-tamper locking, and user-friendly operation. Here are the key benefits:

  • Pneumatic bleed valve allowing increased boost on turbocharger systems
  • Suitable for internal and external wastegate systems
  • Achieves 100-200% boost increase over base spring pressure
  • Proven detent system for defined boost control
  • Locking mechanism for secure boost level setting
  • Manufactured in Australia from High-Grade Brass and Billet Aluminum
  • Simple, elegant, and robust solution for boost control and maximum response

This Boost Tee is a value-packed upgrade for your Turbocharged engine, ensuring reliable and precise boost control for enhanced performance.

Show More Show Less

TurboSmart - Corporate Logo
T#:598852
Part#: TS-0203-1103
In Stock at Vendor
10% off MSRP $ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 44.99 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 44.99 USD
Free Shipping on orders $49 and up

Schrick - Corporate Logo
T#:2114
Part#: TMS2114
Ships on Nov 10, 2026
$ 2,069.99 USD
Free Shipping
$ 2,069.99 USD
Free Shipping
This MINI Cooper S turbo R56 Schrick 248 Degree Intake & Exhaust Camshaft Set with 10.7mm lift provides a power boost at mid-high RPM range while idle smoothness is retained. This kit includes titanium valve retainers.

This item fits the following MINIs:
2006+ MINI R56 MINI Cooper S
2008+ MINI R55 MINI Cooper S Clubman
2008+ MINI R57 MINI Cooper S Convertible

BMW Schrick Technical Specs Schrick Technical Information / Specs
Show More Show Less
Schrick - Corporate Logo
T#:2480
Part#: TMS2480
Ships on Nov 10, 2026
$ 2,827.73 USD
Free Shipping
$ 2,827.73 USD
Free Shipping
This MINI Cooper S turbo R56 Schrick 248 Degree Intake & Exhaust Camshaft Set with 10mm lift provides a power boost at mid-high RPM range while idle smoothness is retained.

This item fits the following MINIs:
2006+ MINI R56 MINI Cooper S
2008+ MINI R55 MINI Cooper S Clubman
2008+ MINI R57 MINI Cooper S Convertible

BMW Schrick Technical Specs Schrick Technical Information / Specs
Show More Show Less


Schrick - Corporate Logo
T#:466
Part#: 042401641-03
Special Order: No Guaranteed ETA
$ 1,138.99 USD
Free Shipping
$ 1,138.99 USD
Free Shipping
As Used on our Project Mini Cooper S
This 264/272 degree cam for the MINI Cooper S provides a smooth linear power gain from midrange to redline, while idle smoothness is retained. We have seen a 6-8 Horsepower gain from the install of this cam on a stock car - more if the car has been "Sharked" or has have the boost increased.

BMW Schrick Technical Specs Schrick Technical Information / Specs
Show More Show Less
Schrick - Corporate Logo
T#:386697
Part#: 042401521-00
Special Order: No Guaranteed ETA
$ 531.99 USD
Free Shipping
$ 531.99 USD
Free Shipping
Schrick - Corporate Logo
T#:2115
Part#: TMS2115
Ships on Nov 10, 2026
$ 937.90 USD
Free Shipping
$ 937.90 USD
Free Shipping
This MINI Cooper S turbo R56 Schrick 252 Degree Intake & Exhaust Camshaft Set with 10mm lift provides a power boost at mid-high RPM range while idle smoothness is retained.

This item fits the following MINIs:
2006+ MINI R56 MINI Cooper S
2008+ MINI R55 MINI Cooper S Clubman
2008+ MINI R57 MINI Cooper S Convertible

BMW Schrick Technical Specs Schrick Technical Information / Specs
Show More Show Less

Schrick - Corporate Logo
T#:540
Part#: 042401601-00
Special Order: No Guaranteed ETA
$ 531.99 USD
Free Shipping
$ 531.99 USD
Free Shipping
This 260 degree cam for the MINI Cooper provides a smooth linear power gain from midrange to redline, while idle smoothness is retained.

BMW Schrick Technical Specs Schrick Technical Information / Specs
Show More Show Less