BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

Includes:

• 3 Liter (3.17 qts) storage tank
• Pressure cap with 0-30 lb gauge and pressure relief valve
• 40" hose
• Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end

Note:

• Recommend working at 10 PSI
• Dimensions for cap seal: 12x21x4 mm
• LIFETIME REPLACEMENT

CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.

BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Experience an upgrade in your turbo system with the NM Eng Turbo Oil Line, which boasts a stainless steel braided line featuring precisely clocked banjo ends. This essential oil line provides a solution to a common issue – the oil leak that frequently occurs from the factory hard line. It's a must-have upgrade that's recommended every time you need to access the turbo by removing the bumper, replace the water pump housing, or enhance your intercooler.

It's important to note that an unchecked turbo oil line leak can result in serious consequences, including a messy oil spill, potential turbo starvation, and even the risk of fire when oil drips onto the catalytic converter, which happens to be the hottest part of your vehicle.

For a comprehensive solution, NM recommends replacing the return oil tubing simultaneously, utilizing the OEM part #: 11658617069.

The turbocharger oil supply line is one of the most common failure points on N14 and N18-equipped R5X MINIs. Responsible for delivering a steady stream of pressurized oil to the turbocharger’s center housing (CHRA), this line keeps the turbo’s bearings properly cooled and lubricated. Unfortunately, its location directly alongside the exhaust manifold and catalytic converter exposes it to extreme heat. Over time, this heat causes the oil inside the line to harden or “coke,” creating a permanent restriction that starves the turbo of vital lubrication.

MINI attempted to address this issue by adding a retrofit heat shield to N14 models, but the problem continues to plague MINI owners. Furthermore, the OEM banjo bolts rely on copper crush washers that become brittle and warp under heat, leading to persistent oil leaks at the back of the engine.

To eliminate these issues, ECS developed a high-performance replacement for the factory turbocharger oil feed line (11657534454). Built from premium stainless steel braided -4 AN hose and engineered to withstand the harsh thermal environment of the N14/N18 engine bay, this upgrade ensures consistent, dependable oil delivery. A PTFE inner lining provides exceptional chemical and temperature resistance, while black zinc–coated fittings and banjo bolts offer improved corrosion protection and long-term sealing. The result is a durable, leak-free solution that outperforms the factory design in every way.

Features:

-4 AN stainless steel braided hose eliminates the OE swivel fittings for superior sealing and consistent oil flow

PTFE inner lining delivers outstanding chemical and temperature resistance

Black-anodized aluminum AN fittings offer improved durability and a refined appearance

Black zinc–coated banjo bolts resist corrosion for a long-lasting repair

Includes four new crush washers to ensure proper sealing during installation

Whether you're fixing an oil leak or performing preventative maintenance, choose the ECS upgraded turbocharger oil feed line for lasting durability and leak-proof performance.

Product Description:

M7 Speed proudly presents the Limited Edition Turbo Heat Shield for all Gen 2 Turbocharged 1.6-liter MINI Coopers. This exclusive release features the same top-selling heat shield, now in a custom Hacienda Wrinkle Red powder coat finish. Perfectly complementing the limited edition MAXX Flo intake system also available in this striking red finish.

This new color has gained popularity among young tuner enthusiasts, adding a vibrant touch under the hood and a distinct WOW effect for MINI owners aiming to stand out. Made in the USA from 0.09in [2.2mm] heavy gauge aluminum material, CNC laser cut, and CNC formed, this heat shield ensures consistently high quality. Lined with ceramic thermal insulation on the underside, it minimizes heat transfer to the hood and top side of the engine compartment, proven effective even on professional race cars subjected to extreme heat.

Features and Benefits:

• Fits both the N14 and N18 MINI 1.6-liter turbocharged engines.
• Open design allows heat to escape down and away from the turbo, enhancing heat rejection through radiator airflow.
• Ceramic thermal insulation reduces heat transfer, preserving the engine bay, hood, hood scoop, and hood graphics.
• Simple DIY installation, mounting directly to the engine at easily accessible factory holes.
• All necessary mounting hardware included, with a 15-30 minute installation using basic hand tools.
• Adds a finished look to the engine compartment, enhancing the WOW! effect.
• Acts as an additional layer of protection for the hood and hood scoop, used alongside the factory turbo heat shield.
• PROUDLY MADE IN THE USA.

M7 Speed leads the way in MINI adventure motoring, overlanding, and ultimate performance products. Committed to exceptional customer service and product innovation, we engineer and produce high-quality, easy-to-install aftermarket performance products. Located in Mooresville, North Carolina, known as Race City USA, we're at the heart of North American motorsports.

Enhance the performance of your MINI with the BladeRunner GT Series Turbocharger designed for the MINI N14 and N18 engines. This turbocharger from BladeRunner offers significant improvements in power and reliability, making it an ideal choice for enthusiasts seeking enhanced performance without compromising on durability.

• Increased horsepower and torque output.
• Improved turbo response and throttle response.
• Enhanced durability and reliability.
• Direct-fit replacement for easy installation.

Upgrade your MINI N14 or N18 engine with the BladeRunner GT Series Turbocharger and experience a new level of performance.

Upgrade Your MINI Cooper with the M7 Speed MAXX-FLO Intake System

Upgrade your 2007-2016 R55-R61 Turbocharged MINI Cooper with the ultimate in affordability and high performance: the MAXX-FLO (TM) Low Restriction Intake System from M7. Engineered for super easy installation, this C.A.R.B. listed intake system is designed to solve common issues found in aftermarket fresh air systems.

Paired with the redesigned M7 Tuning Turbo Heat Shield, not only does this system protect your Gen 2 MINI from turbocharger heat damage, but it also adds a polished finish to your engine compartment. Available in red (56-315102) or black (56-315101), choose the perfect match for your MINI or gift one to the MINIAC in your life today!

Additionally, the M7 Speed exclusive Vacuum Line Relocator Kit is included, providing parts and instructions to safely remove the unsightly OE line and reroute it out of sight, enhancing the visual appeal of your open-hood setup.

Bundle Includes:

• M7 Speed MAXX-FLO (TM) Air Intake System with Red Pleated Filter and Silicone Elbow
• M7 Speed Turbo Heat Shield with Thermal Insulation
• M7 Speed Vacuum Line Relocator Kit for Improved Visual Appearance

Both kits are equipped with all necessary installation hardware and easy-to-follow instructions for a hassle-free upgrade experience.

M7 Speed leads the world in MINI Cooper adventure motoring, overlanding, and ultimate performance products. Committed to exceptional customer service and product innovation, we engineer and produce high-quality, easy-to-install aftermarket performance products. Located in Mooresville, North Carolina, at the heart of North American motorsports, M7 Speed is situated in Race City USA.

Optimize Your MINI with Heated Oxygen Sensors

Is your Check Engine light persistently on, accompanied by troublesome error codes? The solution may be right here. Our Oxygen sensor package for your MINI serves a vital role in monitoring the fuel-air mixture, communicating the ideal fuel level mix to the ECU for optimal performance.

Key Features:

• Includes two heated O2 sensors—one for pre-catalytic and one for post-catalytic use.
• Detect issues before the Check Engine light with a significant drop in gas mileage.
• Ensure your MINI's engine runs at peak performance.
• Also referred to as a Lambda Probe.

Upgrade your Mini's performance with the TTE300 turbocharger from Turbo Engineers (TTE). Built on a brand new Genuine BorgWarner twin-scroll turbocharger, the TTE300 undergoes a meticulous transformation. Featuring a larger TTE billet compressor wheel, CNC re-profiled compressor cover, and intake porting for optimized airflow, this turbocharger ensures rapid response and maximum efficiency. The CNC re-profiled exhaust turbine housing with a larger 9Blade turbine provides higher flow and reduced back pressure. Equipped with a special profile 360-degree high-performance BorgWarner motorsport journal bearing and a sprung Genuine BorgWarner actuator, the TTE300 guarantees durability and excellent transient response. Delivering 300PS+ with proven 98Ron fuel, this plug-and-play turbocharger is a testament to TheTurboEngineers' quality, meticulously assembled and balanced for high-speed performance.

Benefits:

• Larger TTE billet compressor wheel for faster response
• Optimized airflow and reduced turbulence
• Higher flow turbine with less back pressure
• Durable BorgWarner motorsport journal bearing
• Plug-and-play installation for easy setup
• Made in Germany with meticulous assembly and high-speed balancing