Protect your Mini with the Turbo Heat Shield, an essential accessory to prevent hood paint discoloration, scoop warping, and underhood heat damage caused by excessive turbocharger heat. Additionally, it enhances the underhood appearance of your MINI. This metal plate mounts to factory points using supplied hardware, effectively reducing the amount of heat that bypasses the factory shield. While not encasing the turbocharger entirely, it serves as a secondary defense, complementing the factory-installed heat shield that isn't fully effective in preventing long-term hood paint and scoop damage.

• Prevents hood paint discoloration and scoop warping
• Guards against underhood heat damage caused by excessive turbocharger heat
• Enhances underhood appearance
• Mounts to factory points with supplied hardware
• Acts as a secondary defense in addition to the factory heat shield

Product Description:

M7 Speed proudly presents the Limited Edition Turbo Heat Shield for all Gen 2 Turbocharged 1.6-liter MINI Coopers. This exclusive release features the same top-selling heat shield, now in a custom Hacienda Wrinkle Red powder coat finish. Perfectly complementing the limited edition MAXX Flo intake system also available in this striking red finish.

This new color has gained popularity among young tuner enthusiasts, adding a vibrant touch under the hood and a distinct WOW effect for MINI owners aiming to stand out. Made in the USA from 0.09in [2.2mm] heavy gauge aluminum material, CNC laser cut, and CNC formed, this heat shield ensures consistently high quality. Lined with ceramic thermal insulation on the underside, it minimizes heat transfer to the hood and top side of the engine compartment, proven effective even on professional race cars subjected to extreme heat.

Features and Benefits:

• Fits both the N14 and N18 MINI 1.6-liter turbocharged engines.
• Open design allows heat to escape down and away from the turbo, enhancing heat rejection through radiator airflow.
• Ceramic thermal insulation reduces heat transfer, preserving the engine bay, hood, hood scoop, and hood graphics.
• Simple DIY installation, mounting directly to the engine at easily accessible factory holes.
• All necessary mounting hardware included, with a 15-30 minute installation using basic hand tools.
• Adds a finished look to the engine compartment, enhancing the WOW! effect.
• Acts as an additional layer of protection for the hood and hood scoop, used alongside the factory turbo heat shield.
• PROUDLY MADE IN THE USA.

M7 Speed leads the way in MINI adventure motoring, overlanding, and ultimate performance products. Committed to exceptional customer service and product innovation, we engineer and produce high-quality, easy-to-install aftermarket performance products. Located in Mooresville, North Carolina, known as Race City USA, we're at the heart of North American motorsports.

JM Turbo Cooper - Extreme GTD47 K04 Turbocharger Upgrade

JM Turbo Cooper offers the Extreme GTD47 K04 turbocharger upgrade designed to deliver outstanding reliability and high-performance gains for the 2007+ MINI Cooper. This upgrade is a top choice for Mini and Peugeot owners, providing exceptional power output for applications exceeding 280hp.

Update: The improved gasket design on the back side now features a seamless gasket inset, and the package includes a new gasket for your convenience.

The JMTC Extreme GTD47 upgrade boasts a high-pressure, high-flow, dual-scrolling turbo that features a substantial 50mm compressor wheel. This design ensures maximum boost at the top end of the RPM range, making it ideal for track, off-road, and extreme street applications. The large GTX exhaust turbine complements the setup, delivering extra boost at high RPMs and preventing torque loss compared to the stock K03 turbine.

Whether you seek extreme track performance, drag strip dominance, or unrivaled street upgrades, this turbocharger is the perfect choice. It offers impressive torque and durability, outperforming many other options on the market. To fully unleash its potential, we recommend pairing it with one of our aftermarket exhaust systems.

It's important to note that to harness the additional power, a custom tune is required. Running without a tune will result in minimal to no HP gain.

Estimated Power Gains:

• Approximately 60hp with a tune, intercooler, downpipe, cold air intake, new plugs, basic maintenance, and carbon blasting/cleaning.
• 120hp or more with all the above modifications, plus a ported head, larger valves, ICE pipe, intercooler, and a 3"+ or larger exhaust system.

Extreme GTD Upgrade Features:

• Brand new turbo!
• 47mm billet compressor
• High-flow GTX exhaust turbine
• High-strength K04 internals
• Upgraded 360-degree bearing
• Designed for higher pressure
• High-temperature alloy turbine housing
• Dual-scrolling turbine housing
• Water-cooled bearing housing

For engine and turbocharger reliability, JMTC recommends a 3.0" or larger downpipe/exhaust size for the GTD turbochargers. Please avoid using the stock downpipe or stock-sized catalytic converter.

The OEM intake boot can be used with the removal of the inner sleeve for N14 engines. For N18 engines, the OEM boot at the turbo connection will need to be heated and expanded slightly, which can be done with a heat gun. This turbocharger also fits AEM intake, NM Eng intake, and Forge Intake (Boot). Please note that the hose might need to be warmed and stretched over with a hose expander.

Upgrade Your MINI with M7 Speed's High-Performance Fresh Air System!

Looking for an affordable yet high-performance fresh air system for your 2007-2016 R55-R61 Turbocharged MINI Cooper? Look no further than M7 Speed's MAXX-FLO™ low restriction intake system. Engineered for easy installation and unparalleled performance, this system is the ultimate solution for MINI enthusiasts.

Features:

• Super Easy Installation: Say goodbye to complex installations. M7 Speed has engineered a system that's a breeze to install, saving you time and hassle.
• C.A.R.B. Listed: Our MAXX-FLO™ intake system is C.A.R.B. listed, ensuring compliance with emissions standards while maximizing airflow for optimal performance.
• Turbo Heat Shield: Protect your Gen 2 MINI from damage caused by radiant heat from the turbocharger with the M7 Tuning Turbo Heat Shield. Not only does it safeguard your engine, but it also adds a sleek, finished look to your compartment.
• Vacuum Line Relocator Kit: Included in the bundle is an exclusive vacuum line relocator kit. Say goodbye to unsightly OE lines as you configure a new routing, keeping them out of sight for a cleaner visual appearance.

Bundle Includes:

• M7 Speed MAXX-FLO™ Air Intake System with a Red Pleated filter and silicone Elbow
• M7 Speed Turbo Heat Shield with thermal insulation
• M7 Speed Vacuum Line Relocator Kit for improved open-hood visual appearance

Both kits come complete with all necessary installation hardware and easy-to-follow instructions, ensuring a hassle-free upgrade experience.

About M7 Speed:

As the world leader in MINI Cooper adventure motoring, overlanding, and ultimate performance products, M7 Speed is committed to exceptional customer service and product innovation. Based in Mooresville, North Carolina—known as Race City USA—our focus is on engineering and producing high-quality, easy-to-install aftermarket performance products.

Choose between red (56-315102) or black (56-315101) and elevate your MINI driving experience today!

Upgrade Your MINI Cooper with the M7 Speed MAXX-FLO Intake System

Upgrade your 2007-2016 R55-R61 Turbocharged MINI Cooper with the ultimate in affordability and high performance: the MAXX-FLO (TM) Low Restriction Intake System from M7. Engineered for super easy installation, this C.A.R.B. listed intake system is designed to solve common issues found in aftermarket fresh air systems.

Paired with the redesigned M7 Tuning Turbo Heat Shield, not only does this system protect your Gen 2 MINI from turbocharger heat damage, but it also adds a polished finish to your engine compartment. Available in red (56-315102) or black (56-315101), choose the perfect match for your MINI or gift one to the MINIAC in your life today!

Additionally, the M7 Speed exclusive Vacuum Line Relocator Kit is included, providing parts and instructions to safely remove the unsightly OE line and reroute it out of sight, enhancing the visual appeal of your open-hood setup.

Bundle Includes:

• M7 Speed MAXX-FLO (TM) Air Intake System with Red Pleated Filter and Silicone Elbow
• M7 Speed Turbo Heat Shield with Thermal Insulation
• M7 Speed Vacuum Line Relocator Kit for Improved Visual Appearance

Both kits are equipped with all necessary installation hardware and easy-to-follow instructions for a hassle-free upgrade experience.

M7 Speed leads the world in MINI Cooper adventure motoring, overlanding, and ultimate performance products. Committed to exceptional customer service and product innovation, we engineer and produce high-quality, easy-to-install aftermarket performance products. Located in Mooresville, North Carolina, at the heart of North American motorsports, M7 Speed is situated in Race City USA.