Select Vehicle
BMW
Mini
Category
- Strut Braces & Stress Bars
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.
Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.
This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.
The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.
We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.
Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.
Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.
The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).
If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!
Please note:
Strengthen your BMW's chassis with NM Engineering’s Upper Tie-Bar, meticulously designed to fortify the exceptional MINI Cooper chassis. This installation effectively minimizes fore and aft, as well as side-to-side chassis flex during spirited driving, reducing undesired geometry/alignment changes. Experience improved steering response and superior handling with this exceptional addition.
ALL Gen 3 MINI Coopers, including F56, F55, 2.0T, and 1.5T models
**Works with or without DDC factory suspension option.
MINI F55 F56 F57 NM Billet Aluminum Tie-Bar – Blue enhances the rigidity of the MINI Cooper chassis, providing superior handling and steering response. Designed to minimize chassis flex during aggressive driving, this tie-bar helps maintain alignment and geometry, resulting in a more precise driving experience.
Compatible with all Gen 3 MINI Coopers, including F56, F55, 2.0T, and 1.5T, and works with or without the DDC factory suspension option.
Reinforce your MINI Cooper's chassis and elevate its performance with NM Engineering's Upper Tie-Bar. This innovative solution effectively reduces fore and aft, as well as side-to-side chassis flex during spirited driving, resulting in improved geometry and alignment. The outcome is enhanced steering response and superior handling.
Compatible with ALL Gen 3 MINI Coopers, including F56, F55, 2.0T, and 1.5T models, this NM Engineering bar is built for excellence. Its mounting bases and tube ends are meticulously machined from solid 6061-T6 aluminum billets, offering a robust alternative to cheap welded sheet metal components. Crafted from 1" round 6061-T6 aluminum tubing with a 1/4" thick wall, this bar strikes the perfect balance between stiffness and weight. Unlike single-bolt designs, NM Engineering's solution utilizes two bolts to firmly secure the tube end to the mounting base, preventing pivoting and skewing.
Key Features:
Enhance your MINI's handling by stiffening its chassis with the newly redesigned M7 Rear Chassis Brace. This upgrade is crucial for maximizing tire grip, allowing your suspension components—such as springs, shocks, and sway bars—to function optimally and keep your tires in better contact with the ground, resulting in improved grip.
Upgrade your MINI's chassis with the M7 Rear Chassis Brace and experience a significant improvement in grip and handling.
A stylish and functional upgrade for Mini enthusiasts. This tie-bar enhances the structural rigidity of the Mini R55+ chassis, providing improved handling and stability on the road. Crafted from high-quality billet aluminum, it offers durability and corrosion resistance for long-lasting performance. The vibrant red color adds a touch of style to your Mini's engine bay. Upgrade your Mini R55+ with this billet aluminum tie-bar for enhanced driving experience.
Enhance your Mini's performance with the MINI R60 R61 M7 R60 R61 Rally Sport Suspension Kit - Stage 1. This Stage 1 suspension kit from M7 is designed to deliver improved handling and stability for an exhilarating driving experience.
MINI R55+ NM Billet Aluminum Tie-Bar - Blue is the perfect upgrade for Mini R55 and newer models seeking improved stability and performance. Crafted from high-quality billet aluminum, this tie-bar offers superior strength and durability compared to stock components. With its stylish blue finish, this NM tie-bar adds a touch of customization to your Mini while providing enhanced chassis rigidity and responsiveness.
Upgrade your Mini R55 and newer models with the MINI R55+ NM Billet Aluminum Tie-Bar - Blue to experience improved stability, performance, and aesthetics. Invest in this high-quality tie-bar to take your Mini to the next level.
Elevate your Mini's performance with the M7 Tuning J-Brace, specially designed for R56 MINI Coopers equipped with the factory John Cooper Works intake. This brace enhances front-end stiffness, protects strut towers from mushrooming, and adds a stylish touch to your vehicle.
Note: The J-Brace has been slightly modified for the 2011-2013 model year MINI Cooper S for better clearance to stock parts. This brace does not fit the base model Cooper (non 'S' model) or the JCW GP2 model.
MINI R50 R52 R53 M7 Stage I Suspension Kit is the ultimate upgrade for Mini R50, R52, and R53 models seeking improved handling and performance. Engineered by M7, this Stage I Suspension Kit includes carefully selected components to enhance the driving experience of your Mini. With its premium quality construction and precise fitment, this suspension kit offers improved stability, cornering ability, and overall responsiveness.
Upgrade your Mini R50, R52, or R53 with the MINI R50 R52 R53 M7 Stage I Suspension Kit to elevate your driving experience to the next level. Invest in this high-quality suspension kit to unlock the full potential of your Mini.
Experience heightened MINI Cooper performance with the M7 Tuning Stage III Bundle, combining three cutting-edge suspension components to optimize your vehicle's capabilities. This package includes the M7 Strut Tower Brace Kit, the exclusive Under Strut System (USS), and the M7 Rear Chassis Brace, meticulously designed for MINI Cooper models.
The ultimate upgrade for MINI enthusiasts seeking top-tier performance. Enhance your driving experience with improved handling and control, designed specifically for rally sport enthusiasts.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
A high-performance upgrade designed to enhance the handling and stability of your Mini R60/R61 model. Engineered by M7, a trusted name in Mini performance parts, this strut tower brace reinforces the chassis structure, reducing flex and improving cornering stability. Its durable construction and precise fit ensure long-lasting performance, while its sleek design adds a sporty aesthetic to your Mini. Experience improved handling and driving dynamics with the M7 R60/R61 Monster Strut Tower Brace.
Strengthen your Mini's chassis with the MINI R50 F53 Rear Chassis Brace. Specifically designed for Mini R50 and F53 models, this rear chassis brace improves rigidity for enhanced handling and cornering performance. Upgrade your Mini's suspension with this high-quality chassis brace for a more responsive and enjoyable driving experience.