Dinan Intake Resonator Delete Pipe - B46 2.0L

Call In Or Chat For Best Price!

T#:22921260

Part#: D760-0064

In Stock

11% off MSRP $ 168.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD

Add to Wish List

Qty

11% off MSRP

$ 168.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 149.99 USD

Add to Wish List

Enjoy the raw, unfettered sounds of the intake/turbo with the Dinan Intake Resonator Delete Pipe! The direct replacement upgrade eliminates the sound deadening element of the factory pipe resulting in the natural voice of the intake/turbo to be noticeably restored. While impressive on its own, coupled with a Dinan intake the full uninhibited chorus of the entire system is put on full display for everyone's enjoyment. Beyond sound suppression, the OEM intake resonator also hinders flow with its disruptive multi-directional flow path. This obstructive factory component is instead replaced by larger diameter, durable, and lightweight smooth-bore aluminum piping that not only improves flow but minimizes pressure drop for improved turbo efficiency. The black powder-coated piping incorporates TIG welded fittings that guarantee seamless fitment with the factory connections in and a nearly concealed aesthetic within the engine bay. Whether or not you are running completely stock or with a variety of 3rd party modifications the Dinan assembly will fit right in. Short of the tempered, outlined, DINAN logo peeking out from just underneath the cowling you will be hard pressed to even realize it's there - that is, until you hear it. Features: Eliminates factory intake resonator to restore natural unfiltered intake/turbo sounds Larger diameter smooth-bore aluminum piping (Dinan: 76mm; OEM: 70mm) for improved airflow and minimization of pressure-drop Upgraded durability and visual appeal via billet aluminum construction w/ TIG welding Direct replacement of OEM pipe Bolt-On Installation Perfect complementary piece to a Dinan intake for maximum sound and flow

Show More Show Less

Cone Filter 2.75" Mouth For ALTA Intake Systems - Mini R5X

T#:7244439

Part#: XAMPINT208

In Stock

Sale - Save 10% $ 79.00

This product was last offered at the strikethrough price on
07-17-2026

$ 71.10 USD

Add to Wish List

Qty

Sale - Save 10%

$ 79.00

This product was last offered at the strikethrough price on
07-17-2026

$ 71.10 USD

Add to Wish List

ALTA Performance Open Cell Foam Filter

Improve your BMW's performance with the ALTA Performance Open Cell foam filter, designed to enhance horsepower, filtration efficiency, and ease of installation. This direct replacement filter is compatible with all ALTA Cold Air Intake Systems and universal applications requiring a 2.75" mouth filter.

Benefits:

Increases horsepower
Improves filtration efficiency
Simple and easy to install
Compatible with ALTA Cold Air Intake Systems and universal applications

Show More Show Less

BMW & MINI B46 B48 Air Filter Dinan High Flow Drop-in Replacement ...

Call In Or Chat For Best Price!
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:18236087

Part#: D401-0034

In Stock

11% off MSRP $ 70.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Qty

11% off MSRP

$ 70.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

BMW & MINI B46 B48 Air Filter Dinan High Flow Drop-in Replacement is designed to enhance engine performance while reducing maintenance costs. This high-flow, washable air filter provides superior airflow compared to standard filters, allowing your engine to breathe easier and perform better. Ideal for BMW and MINI vehicles, this drop-in replacement filter is a cost-effective alternative to a full intake system upgrade. Dinan's advanced filter materials ensure increased power and efficiency without the need for a full system replacement.

High Flow Performance: Increases airflow for improved engine performance.
Washable and Reusable: Reduces long-term maintenance costs with a durable, washable filter.
Easy Installation: Drop-in design for a straightforward replacement without modifications.
Enhanced Engine Efficiency: Allows the engine to make more power with less effort.

Show More Show Less

MINI R56 Air Filter - Dinan High Flow Drop-in Replacement

Call In Or Chat For Best Price!
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:18236082

Part#: D401-0033

Ships on Aug 13, 2026

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

MINI R56 Air Filter - Dinan High Flow Drop-in Replacement enhances your vehicle's performance and reduces maintenance costs with its advanced high-flow design. This washable, drop-in air filter allows your engine to breathe more efficiently, increasing power and reducing strain.

Improved Engine Performance: High-flow design increases airflow to the engine, boosting power and acceleration.
Cost-Effective Maintenance: Washable filter reduces the need for frequent replacements, lowering maintenance costs.
Enhanced Efficiency: Allows the engine to work less hard, contributing to better overall performance.
Easy Installation: Drop-in replacement makes for a hassle-free upgrade without the need for a full intake system.
Reliable Quality: Crafted by Dinan, a trusted name in performance parts, ensuring high standards and durability.

Upgrade to the Dinan High Flow Drop-in Air Filter for your MINI R56 and experience noticeable improvements in engine performance and efficiency.

Show More Show Less

Dinan Intake Resonator Delete Pipe - B48 2.0L

Call In Or Chat For Best Price!

T#:22921261

Part#: D760-0067

In Stock

12% off MSRP $ 190.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 168.99 USD

Add to Wish List

Qty

12% off MSRP

$ 190.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 168.99 USD

Add to Wish List

Enjoy the raw, unfettered sounds of the intake/turbo with the Dinan Intake Resonator Delete Pipe! The direct replacement upgrade eliminates the sound-deadening element of the factory pipe resulting in the natural voice of the intake/turbo to be noticeably restored. Beyond sound suppression, the OEM intake resonator also hinders flow with its disruptive multi-directional flow path. This obstructive factory component is instead replaced by 76mm diameter, durable, and lightweight smooth-bore aluminum piping that improves flow for increased turbo efficiency. The black powder-coated piping incorporates TIG welded fittings that guarantee seamless fitment with the factory connections in and a nearly concealed aesthetic within the engine bay. Whether or not you are running completely stock or with a variety of 3rd party modifications the Dinan assembly will fit right in. Short of the tempered, outlined, DINAN logo peeking out from just underneath the cowling you will be hard-pressed to even realize it's there - that is, until you hear it. Features: Eliminates factory intake resonator to restore natural unfiltered intake/turbo sounds 76mm diameter smooth-bore aluminum piping for improved airflow Upgraded durability and visual appeal via billet aluminum construction w/ TIG welding Direct replacement of OEM pipe Bolt-On Installation

Show More Show Less

ECS Tuning Intake Pipe Upgrade - Rear Section - BMW F48/49/39, MINI F...

T#:6908157

Part#: 090758ECS09

In Stock

Sale - Save 20% $ 319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 255.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 255.99 USD

Add to Wish List

BMW's OE intake pipe (13717619268) leaves a lot to be desired thanks to its plastic construction and tight bends. This leads to potential cracking from heat cycle fatigue as well as limited, turbulent airflow. Improve the airflow to your BMW's turbos with this ECS Tuning Intake Pipe Upgrade! Featuring full aluminum construction, black powder coating, and smooth bends, this intake pipe is an easy plug-and-play addition to your BMW or MINI! Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume Sound chamber delete for increased turbo response and mid-to-top end power

Show More Show Less

ECS Kohlefaser Luft-Technik Intake System

T#:393472

Part#: 001849ECSKT1

Ships on Nov 18, 2026

Sale - Save 5% $ 573.99

This product was last offered at the strikethrough price on
06-13-2026

$ 545.29 USD

Add to Wish List

Qty

Sale - Save 5%

$ 573.99

This product was last offered at the strikethrough price on
06-13-2026

$ 545.29 USD

Add to Wish List

The ECS Tuning Kohlefaser Luft-Technik (Carbon fiber Air Technology) line is a premium intake system designed to fit like OEM with added performance gains and appearance. This intake allows you to maintain a factory like seal enclosure and the ability to work with the JCW and GP2 strut tower brace.

The ECS Tuning Kohlefaser Luft-Technik Intake System features:

Gains of +3 WHP / +4 FT-LBS TQ on 100% Stock Vehicle Cooper S
Gains of +11 WHP / +10 FT-LBS TQ on 100% Stock Vehicle JCW
Broader and smoother torque curve for an enhanced driving experience
Sealed Carbon Fiber Upper, Lower Intake Box & Upper Intake Tube
4.5" - 5.0" ECS Tuning Performance Cone, Cotton Gauze, Reusable Air Filter
MINI Factory location clips
4-Ply Silicone Couplers, Stainless Steel Hose Clamps, and Hardware

*Not CARB Approved.

Show More Show Less

Dinan Carbon Fiber Air Intake - 2020+ BMW & MINI B46/B48

Call In Or Chat For Best Price!

T#:20946757

Part#: D760-0057

In Stock

11% off MSRP $ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 415.99 USD

Add to Wish List

Qty

11% off MSRP

$ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 415.99 USD

Add to Wish List

NOTE: **Please check MAF sensor, at this point it will only fit the slant edge design sensor (not round edge design) More info here: https://www.northamericanmotoring.com/forums/f55-f56-hatch-talk-2014/334044-eventuri-intake-functional-hood-scoop-review.html (post #14) Dinan's highly successful 3rd generation MINI intake has been tweaked and a new variant engineered that supports LCI models as well as 2020+ F48/F39 BMW X1/X2's! Like its predecessor, the Dinan carbon fiber intake for the MINI/BMW transverse B46/B48 engines is tantamount to an exercise in efficiency. Given a confined space with limited options and an even smaller budget; create an intake that provides power, sound, and throttle response in an aesthetically pleasing package. While not the easiest of things to accomplish, we embarked upon the task with our team of engineers determined to provide a solution. Through a bevy of flow bench testing, it was quickly determined that the biggest hindrance to improved flow on the stock intake was the factory snorkel. Unfortunately, the snorkel was also the piece that would cause the largest increase in cost to a potential kit. As a result, it was quickly abandoned as a potential area of improvement. Instead, attention was turned to finding a way to introduce a secondary inlet for additional airflow. With limited room to work with, traditional secondary ducting was not possible. This, in turn, led to multiple experiments being conducted on the effectiveness of a possible open-air inlet on the upper lid. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where lots of overheated engine bay air is utilized in the intake tract. The results of these tests showed that a 12 square-inch opening for additional air on the opposite side of the upper lid from the engine provided a perfect balance of additional volume to assist the factory snorkel all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). With more air being pulled into the system, throttle response is improved, and additional power is realized in the form of maximum gains of +12 WHP / +23 ft-lbs of torque in the low/mid-range. The secondary air inlet also allows the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased power and sound, the system is made of immaculate carbon fiber, so it looks the role as well. The result of an optimized lid, an improved filter, and thorough testing, yields an incredibly efficient and cost-effective solution that you will be hard-pressed to beat. Features: More Power: Max gains of 12 WHP and 23 lb-ft of torque (see chart for details) Enjoyably louder, sportier sound Improved throttle response Large carbon fiber air box lid allows increased volume of air to be utilized taking advantage of the free flowing filter Bell-mouthed side inlet creates a secondary air intake source with optimal flow characteristics and no increase in intake air temperature Bolt-On Installation **NOT Compatible for B48E MINIs**

Show More Show Less

Dinan Carbon Fiber Air Intake - BMW F48 X1 28i F39 X2 28i B46/48 ...

Call In Or Chat For Best Price!

T#:587296

Part#: D760-0051

In Stock

11% off MSRP $ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 415.99 USD

Add to Wish List

Qty

11% off MSRP

$ 467.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 415.99 USD

Add to Wish List

The Dinan carbon fiber intake for the MINI B46/B48 engines (as well as the BMW F48 X1 and F39 X2) is tantamount to an exercise in efficiency. Given a confined space with limited options and an even smaller budget-- create an intake that provides power, sound, and throttle response in an aesthetically pleasing package. While not the easiest of things to accomplish, we embarked upon the task with our team of engineers determined to provide a solution. With more air being pulled into the system, throttle response is improved and additional power is realized in the form of max gains of +5 HP / +5 ft-lbs of torque. The secondary air inlet also allows the intake system to be more audible so the turbo spool and BOV can be appreciated. Not to be outdone by the increased power and sound, the system is made of immaculate carbon fiber so it looks the role as well. The end result of an optimized lid, an improved filter and thorough testing, yields an incredibly efficient and cost effective solution that you will be hard pressed to beat. Benefits of the Dinan Carbon Fiber High Flow Air Intake System: More Power: +5 HP & +5 lb-ft of torque at 5000 RPM Enjoyable louder, sportier sound Improved throttle response Large carbon fiber air box lid allows increased volume of air to be utilized taking advantage of the free flowing filter Bell-mouthed side inlet creates a secondary air intake source with optimal flow characteristics and no increase in intake air temperature Free flowing injection molded Air Mass Meter housing Quick and easy installation

Show More Show Less

R55/R56/R57/R58/R59/R60/R61 MINI Cooper S/JCW Charge Pipe Kit ...

T#:6908156

Part#: 090707ECS09

Ships in 1-3 days

Sale - Save 3% $ 317.99

This product was last offered at the strikethrough price on
06-14-2026

$ 308.45 USD

Add to Wish List

Qty

Sale - Save 3%

$ 317.99

This product was last offered at the strikethrough price on
06-14-2026

$ 308.45 USD

Add to Wish List

BMW F56 B46 B48 JCW Charge And Boost Pipes

T#:6908158

Part#: 090750ECS09

Special Order: No Guaranteed ETA

$ 305.99 USD

Add to Wish List

Qty

$ 305.99 USD

Add to Wish List

BMW F56 B46 B48 JCW Charge And Boost Pipes are designed to elevate your Mini Cooper's performance to new heights. Tailored specifically for the F55, F56, F57, and F54 models, these pipes are crafted to enhance airflow and durability, delivering optimal turbocharged efficiency. Turner Motorsport's Charge and Boost Pipes minimize restrictions, resulting in improved throttle response and increased power output. Upgrade your Mini with these precision-engineered pipes to enjoy superior turbo performance and a sleek, high-quality appearance.

Enhanced Airflow: Boosts airflow for optimal turbocharged efficiency.
Increased Power Output: Reduces restrictions for better throttle response and power.
Durable Construction: Engineered for lasting performance and reliability.
Sleek Design: Adds a high-quality, attractive look to your Mini Cooper.

Show More Show Less

F55/F56/F57/F54 Cooper S Charge and Boost Pipes Kit

T#:6908160

Part#: 090716ECS09

Ships in 1-3 days

Sale - Save 3% $ 407.99

This product was last offered at the strikethrough price on
06-14-2026

$ 395.75 USD

Add to Wish List

Qty

Sale - Save 3%

$ 407.99

This product was last offered at the strikethrough price on
06-14-2026

$ 395.75 USD

Add to Wish List

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

T#:369781

Part#: 30-3000

Ships in 1 Business Day

11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Qty

11% off MSRP

$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing

Show More Show Less

AEM V3 Water/Methanol Injector Kit (Qty 2)

T#:20815166

Part#: 30-3313

In Stock

12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

Qty

12% off MSRP

$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.

Show More Show Less

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

T#:590418

Part#: 30-3304

In Stock at Vendor

11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Qty

11% off MSRP

$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

Enhances performance and efficiency for BMW and MINI vehicles
Maximizes power output while ensuring engine safety
Internal MAP sensor for precise control
35PSI maximum pressure capacity for reliability
Improves horsepower, torque, and fuel economy

Show More Show Less

AEM Water/Methanol Injection System

T#:20815164

Part#: 30-3326

In Stock at Vendor

11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

Qty

11% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for MINI

Sub-Categories

Dinan Intake Resonator Delete Pipe - B46 2.0L

Cone Filter 2.75" Mouth For ALTA Intake Systems - Mini R5X

ALTA Performance Open Cell Foam Filter

Benefits:

BMW & MINI B46 B48 Air Filter Dinan High Flow Drop-in Replacement ...

MINI R56 Air Filter - Dinan High Flow Drop-in Replacement

Dinan Intake Resonator Delete Pipe - B48 2.0L

ECS Tuning Intake Pipe Upgrade - Rear Section - BMW F48/49/39, MINI F...

ECS Kohlefaser Luft-Technik Intake System

Dinan Carbon Fiber Air Intake - 2020+ BMW & MINI B46/B48

Dinan Carbon Fiber Air Intake - BMW F48 X1 28i F39 X2 28i B46/48 ...

R55/R56/R57/R58/R59/R60/R61 MINI Cooper S/JCW Charge Pipe Kit ...

BMW F56 B46 B48 JCW Charge And Boost Pipes

F55/F56/F57/F54 Cooper S Charge and Boost Pipes Kit

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

AEM V3 Water/Methanol Injector Kit (Qty 2)

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

AEM Water/Methanol Injection System

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results