Elevate your Mini Turbo Models, including Cooper S and JCW, with the ALTA BOV Spring Upgrade. This replacement spring offers a cost-effective, high-performance solution for your stock Blow Off Valve (BOV). By holding more boost between shifts, it significantly reduces turbo lag, enhancing overall performance. The carefully designed stiffer spring ensures normal BOV operation while maintaining increased pressure in the boost tubes, preventing power gaps.

• Simple and cost-effective upgrade for improved turbo response
• Reduces turbo lag between shifts, boosting overall performance
• Designed with a custom-made heat-treated 17-7 Stainless Steel Spring
• Rated for over 7,000,000 cycles for long-lasting durability
• Holds and vents up to 40psi efficiently

Enhance your Generation 2 MINI Cooper's cooling system with the M7 Speed Cold Side Lower Intercooler Elbow. Crafted from top-quality four-ply 100% silicone material, this OE replacement elbow offers superior durability and performance over the factory rubber part. Its mandrel tooling construction ensures a smoother and larger bend compared to the stock elbow. Engineered to withstand up to 58 PSI [4.0 BAR] of charge air pressure, it's an ideal fit for high-performance MINIs running increased boost. This kit includes one silicone elbow and two high-quality stainless steel clamps, offering a hassle-free installation process for DIY enthusiasts using basic hand tools.

• Direct bolt-on OE replacement with no modifications needed.
• OE-quality four-ply 100% silicone construction ensures enhanced durability.
• Resistant to age, environmental exposure, heat, and high boost pressure.
• Simple installation using basic hand tools.
• Kit includes two stainless steel-lined hose clamps.

MINI R52 R53 Silicone Intercooler Boots - Red are designed to enhance the performance and reliability of your MINI's intercooler system. These high-quality silicone boots are ideal for use with most aftermarket intercoolers and older versions of the DFIC. Their extended length ensures a superior seal between the intercooler core and the inlet/outlet horns, providing more surface area for a secure clamp fit.

The MINI R52 R53 Silicone Intercooler Boots offer several advantages:

• Enhanced Sealing: Longer boots provide a better seal, reducing the risk of leaks.
• Improved Fit: Tighter fit around both the intercooler and OEM intercooler horns prevents slipping.
• Increased Durability: Made from high-quality silicone for long-lasting performance.
• Easy Installation: Designed for straightforward installation with no special tools required.
• Color Options: Available in red, black, or blue to match your vehicle’s style.
• Proudly Made in the USA: Ensures high manufacturing standards and quality control.

MINI R52 R53 Intercooler Couplers Red - Pair offer a stylish and practical upgrade for your MINI's intercooler system. These high-temperature silicone couplers replace the OEM rubber connectors on either side of the intercooler, addressing common issues such as lost horsepower, decreased fuel economy, and poor drivability.

The MINI R52 R53 Intercooler Couplers Red - Pair provide the following benefits:

• Enhanced Durability: Made from high-temperature silicone to withstand extreme conditions and prevent cracking.
• Improved Performance: Replaces thin rubber connectors that can degrade over time, ensuring a more reliable seal and optimal intercooler function.
• Stylish Upgrade: Available in vibrant red, adding a touch of color to your engine bay.
• Versatile Fit: Compatible with both stock and aftermarket intercoolers.
• Easy Installation: Designed for straightforward replacement with no modifications required.

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete your MINI's intake system with silicone components. It offers a matching set for your engine bay.

M7 Speed proudly announces the release of its newly developed 100% silicone, four-ply fiber reinforced intake hose for all MINIs equipped with the N14 turbocharged engine. This direct OE replacement part provides superior durability, enhanced airflow, and virtually unlimited service life. Beyond its outstanding performance, it also adds a striking under-hood appearance that MINIs desperately need.

Unlike other similar hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit comes complete with three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part is only compatible with MINIs equipped with the N14 turbocharged engine that have one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.97” (50mm) ID at the turbo inlet.
• Easy DIY installation.

Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as other popular M7 silicone hose products, this OE replacement elbow offers enhanced durability and performance.

Key Features:

• Direct factory OE replacement with no modifications required
• Smooth and larger bend compared to the convoluted molded rubber OE part
• Resistant to age, oil reaction, high boost applications, and environmental damage
• Designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure
• Includes one silicone elbow and two high-quality lined stainless steel clamps
• Easy installation with basic hand tools
• Currently available only in BLACK

Upgrade your MINI's performance with the M7 Speed Cold Side Lower Intercooler Elbow, designed to replace the OE rubber elbow prone to failure over time. With its durable silicone construction and easy installation, this elbow is perfect for high-performance MINIs running increased boost.

Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as our other popular silicone hose products, this OE replacement elbow offers enhanced durability and performance.

• Direct bolt-on OE replacement. No modifications required.
• OE part is not available from MINI
• Four-ply 100% silicone construction.
• Eliminates OE hose failure caused by age, environmental exposure, heat, and high boost pressure.
• Easy to install with basic hand tools.
• Comes with two stainless steel lined hose clamps.

Perfect for high-performance MINIs running increased boost, this M7 Speed Cold Side Lower Intercooler Elbow is designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure. The kit includes one silicone elbow and two high-quality lined stainless steel clamps. Currently available only in BLACK, this elbow is easy to install by any moderately skilled DIY car enthusiast using basic hand tools.

ALTA Cold Air Intake System, specially designed for the R53 6-speed manual. Crafted from laser-cut aluminum sheet metal and precision CNC bent, this intake system ensures perfection in form and function. Finished with a durable black texture powder coating, it not only offers long-term protection but also delivers an OEM appearance.

The airbox of the ALTA Cold Air Intake seals to the underside of the hood, effectively preventing under-hood heat from infiltrating the intake airstream. This enhancement ensures cooler, denser air intake, resulting in improved engine performance. With the ALTA intake system, your BMW will produce a distinct throaty, deep tone on throttle, accentuating its modified nature. Additionally, it amplifies the sound of your supercharger, whether stock or aftermarket.

Featuring a high-flow foam filter, this intake system significantly reduces intake restriction while expanding the surface area for the engine to intake clean air. Unlike cotton or gauze-type filters, the foam-based filter facilitates multi-layer filtration, effectively trapping dirt at various levels. This superior filtration capability results in improved particulate restriction without compromising horsepower, even as the filter accumulates dirt.

Benefits:

• Precision-crafted aluminum construction for durability
• Under-hood heat prevention for cooler, denser air intake
• Enhanced engine performance and modified engine tone
• High-flow foam filter for reduced intake restriction
• Multi-layer filtration without compromising horsepower

MINI R55 to R61 Foam Filter Panel features high-flowing, super-cleaning foam media that enhances air intake efficiency while maintaining excellent dirt-holding capacity. This advanced design allows for a thinner filter with double the volume compared to the OEM intake box, promoting superior airflow and performance.

The MINI R55 to R61 Foam Filter Panel offers several key benefits:

• Enhanced Airflow: The foam media enables more air to be drawn across the entire filter, improving overall engine performance.
• Increased Volume: Provides up to twice the volume of the OEM intake box, allowing the intake system to breathe more freely.
• Consistent Performance: Unlike OEM and K&N filters, which can lose horsepower as they clog, the foam media continues to flow effectively even when full of dirt.
• Improved Horsepower: Maintains maximum horsepower between filter cleanings, ensuring sustained engine performance.

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI's performance with the newly developed M7 Speed 100% silicone four-ply fiber-reinforced intake hose. Designed as a direct OE replacement part for all MINIs equipped with the N14 turbocharged engine, this hose offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds a striking under-hood WOW factor that MINIs desperately need.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part only fits MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed as a direct OE replacement part for all MINIs equipped with the N14 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds a striking under-hood WOW factor that MINIs desperately need.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for hassle-free installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit, offering a complete silicone solution for your intake system. Get a matching set for your engine bay that not only enhances performance but also looks fantastic.

M7 Speed is proud to release its 100% silicone, four-ply fiber-reinforced intake hose for all MINIs equipped with the N14 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this direct OE replacement part offers superior durability, enhanced airflow, and virtually unlimited service life. It not only boosts performance but also adds a stunning under-hood WOW factor that MINIs desperately need.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit comes with three stainless steel clamps and easy-to-follow installation instructions. Note that this part fits only MINIs equipped with the N14 turbocharged engine with one large PCV vent hose connected from the intake hose to the cam cover.

Features:

• Made from 100% silicone, resistant to oil and most chemicals.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber-reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

Upgrade your MINI's performance with the MINI R Chassis N14 N18 High Flow Pre-Intercooler Charge Pipe in Green. Engineered for optimal airflow and durability, this charge pipe is a must-have for MINI enthusiasts looking to enhance their driving experience.

• Increases airflow for improved performance
• Durable construction ensures long-lasting reliability
• Easy installation with basic hand tools
• Vibrant green color adds a stylish touch to your engine bay

MINI R52 R53 Cold Air Intake System Automatic - Black is engineered to enhance your MINI's performance with a sleek and durable design. The ALTA Cold Air Box is meticulously crafted from laser-cut aluminum sheet metal and CNC bent for precision. Finished in a rich black texture powder coating, it offers long-term protection and a stylish OEM look. This airbox seals tightly to the underside of the hood, preventing under-hood heat from contaminating the intake airstream.

With the ALTA intake system, your vehicle will produce a deep, throaty tone under throttle, making the presence of your supercharger unmistakable. The high-flow foam filter improves airflow and increases the surface area for clean air intake, featuring multi-layer filtration for superior dirt capture without reducing horsepower as it accumulates dirt.

The ALTA Cold Air Intake System consistently delivers a 10-12 WHP gain and is available in black or red texture powder coating.

• Made from laser-cut aluminum and CNC bent for precision
• Rich black texture powder coating for durability and OEM look
• Seals to the underside of the hood to prevent heat contamination
• Produces a deep, throaty engine tone
• High-flow foam filter with multi-layer filtration for superior dirt capture
• Proven 10-12 WHP gain
• Available in black or red texture powder coating

Upgrade Your MINI with the MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side

The MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side is an essential component for optimal performance. Crafted with precision and quality materials, this lower intercooler elbow ensures efficient airflow and durability for your MINI.

Key Benefits:

• Enhances airflow for improved engine performance
• Constructed with quality materials for durability
• Precision-engineered for a perfect fit
• Easy installation with no modifications required

Upgrade your MINI's performance with the MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side. This essential component enhances airflow, improving engine performance and ensuring durability. With its precision engineering and quality materials, installation is a breeze, requiring no modifications to your MINI.

Elevate your Mini's performance with the combined strength of the M7 Speed COLD SIDE Intercooler Elbow Kit and the sought-after HOT SIDE Charge Pipe, both in an eye-catching Red hue. Engineered for superior airflow and reduced pressure drop from the turbo to the throttle body, this intercooler pipe kit is your key to unlocking enhanced power for your vehicle. Crafted from premium four-ply fabric-reinforced 100% silicone material, this kit not only boosts power and throttle response but also adds a striking visual appeal under your hood. Bid farewell to high boost failures common with OE parts. Furthermore, the M7 kit eliminates the OE hose side muffler and cold side sound chamber, resulting in improved throttle response and increased power in the mid-range to top-end.

Key Benefits:

• Maximizes airflow for increased power
• Enhances throttle response
• Eliminates high boost failures seen in OE parts
• Improves under-hood aesthetics

MINI R55+ Cold Side Intercooler Elbow Kit | Gen 2 Turbocharged MINI Cooper - Black

MINI R55+ Cold Side Intercooler Elbow Kit | Gen 2 Turbocharged MINI Cooper - Black is a premium upgrade for Mini owners seeking improved performance and style. Specifically designed for MINI R55 and newer models with Gen 2 Turbocharged engines, this cold side intercooler elbow kit enhances airflow and reduces turbulence for better engine efficiency. With its sleek black finish and durable construction, it not only adds a stylish touch to your Mini's engine bay but also ensures long-lasting performance.

• Specifically designed for MINI R55 and newer models with Gen 2 Turbocharged engines
• Enhances airflow and reduces turbulence for improved engine efficiency
• Sleek black finish adds a stylish touch to your Mini's engine bay
• Durable construction ensures long-lasting performance
• Easy installation for convenience

Upgrade your Mini's performance and style with the MINI R55+ Cold Side Intercooler Elbow Kit and experience the difference on the road.

Upgrade your Mini with the M7 Speed MAXX-FLO (TM) fresh air system, specially designed for Generation 2 MINIs including R55 through R59 models equipped with N14 & N18 Turbocharged engines, as well as the R60 Countryman and R61 Paceman. This system replaces the restrictive stock air box with a sturdy heavy gauge aluminum frame, ensuring seamless installation via factory mounting points. Included in the MAXX-FLO(TM) kit is a low restriction foam air filter that amplifies airflow, improves engine performance, and adds a compelling sound to your Mini.

• Sturdy heavy gauge aluminum & TIG welded construction
• Red super durable powder coat finish with a laser cut stainless steel M7 medallion
• 12" long x 5 " diameter dual-stage super high flow/low restriction washable foam filter
• Optional 8" long x 6" dia pleated washable filter available
• 100% silicone connection elbow in BLACK, BLUE, or RED
• MAF sensor remains in the stock location without modifications
• Heat shield compatibility for optimal performance and heat management
• Made in the USA with ease of installation

TECH NOTES: If your vehicle is not equipped with a MAF Sensor (most early non-USA models) you will need the optional MAF Spacer|Adapter to connect properly to stock components on your car. If using a stock scoop, removal of the factory blocking plate is recommended. This product has passed C.A.R.B. approval.