Silicone Coupler - Straight 3" ID (76.20mm) x 3" L

No matter the project, ECS Tuning silicone couplers and elbows offer a high-quality, precision-engineered solution to your needs. Whether you're installing an intercooler, fabricating a custom intake system, or whatever else you can dream up, ECS Tuning has you covered.

• High-quality silicone construction for durability
• Precision-engineered design ensures a perfect fit
• Versatile solution for various automotive projects
• Enhances performance and reliability
• Compatible with BMW and other vehicles

ECS Tuning Silicone Turbo Inlet Hose – MINI Cooper S/JCW N14 (R55-R59)

Upgrade your MINI Cooper N14 with our high-flow silicone turbo inlet hose, featuring increased internal volume for greater airflow, a smooth interior finish for an uninterrupted flow path, and more available air for your turbo to consume, resulting in enhanced performance and throttle response.

Unlike the factory plastic inlet hose, which degrades over time and was never engineered with performance in mind, the ECS Tuning replacement features a durable, 4-ply silicone construction with wire reinforcement to handle higher temperatures and boost levels. Reinforced sections help prevent flex and collapse under load, and a smooth internal profile with a counterbored outlet reduces turbulence for optimized airflow to the turbocharger.

ECS Tuning also addresses a known issue where the OEM hose can walk off the turbo inlet and ingest the included gasket, often leading to premature turbo failure. This upgraded design provides a much more secure fit and peace of mind for performance-minded MINI owners.

Product Features

Constructed from heavy-duty, 4-ply fiberglass-reinforced silicone

Designed to resist collapse, distortion, and degradation from heat, oil, and fuel exposure

Smooth interior walls and gradual taper ensure unimpeded, efficient airflow

Includes spacers/adapters to accommodate factory or common upgraded turbo sizes

Gloss black finish adds a clean, high-performance appearance to the engine bay

Stainless steel smooth-band hose clamps are included for secure installation

Engineered to handle continuous operating temperatures up to 250°F

Direct replacement for the OE turbo inlet hose—no tuning required

Kit Includes

(1) Silicone turbo inlet hose
(2) Silicone turbo inlet rings for size adaptation
(3) Smooth-band stainless steel hose clamps
Engineering and Development
Designed, tested, and quality-inspected at ECS Tuning’s in-house R&D facility in Wadsworth, Ohio. Utilizing precision tools like FARO laser scanning, SolidWorks 3D CAD modeling, and in-house rapid prototyping, ECS ensures perfect fitment and long-term durability.

Installation Notes
Installation is simple and fully reversible. Remove the stock inlet hose and install the ECS silicone hose using the included clamps and spacers as needed. No permanent modifications required.

Not legal for sale or use in California on any pollution-controlled motor vehicle in accordance with the California Air Resources Board (CARB).

Upgrade your BMW or MINI with the BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm). This high-quality silicone coupler is designed to provide a secure and leak-free connection for your vehicle's intake or cooling system. Engineered for durability and flexibility, it ensures optimal performance under various conditions. With its straight design and precise dimensions, this silicone coupler offers easy installation and a perfect fit for your BMW or MINI.

• Provides a secure and leak-free connection
• Engineered for durability and flexibility
• Straight design for easy installation
• Perfect fit for BMW and MINI vehicles

MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is an essential upgrade for Mini enthusiasts looking to enhance the performance of their MINI N18 1.6L engine. This high-quality charge pipe, in sleek black finish, is designed to increase airflow and reduce turbo lag for improved throttle response and power delivery.

Crafted with precision engineering and durable materials, the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black ensures a perfect fit and reliable performance. It effectively increases the efficiency of the intercooler system, allowing for cooler and denser intake air for better engine performance.

• Enhances performance of MINI N18 1.6L engine
• Increases airflow and reduces turbo lag
• Improves throttle response and power delivery
• Sleek black finish adds aesthetic appeal
• Crafted with precision engineering and durable materials
• Ensures perfect fit and reliable performance

Investing in the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is a smart choice for Mini owners looking to unlock the full potential of their vehicle's engine.

M7 MINI Cooper S Cold Air Intake

Upgrade your MINI Cooper S with the M7 Cold Air Intake, a high-performance solution designed for enhanced engine efficiency and power. This innovative intake system features a fully enclosed custom metal housing that seals a dual-stage high-flow foam filter, offering superior filtration and heat resistance. With a focus on delivering optimal airflow, the M7 Cold Air Intake significantly improves your MINI's performance. Its pressurized, cold air supply from the cowl area beneath the windshield enhances power without the need for any factory parts modifications. Installation is quick and hassle-free, allowing you to enjoy the ride in no time.

Key Features:

• Fully enclosed custom metal housing
• Dual-stage high-flow foam filter
• Over-sized filter for ample filtering capacity
• Velocity stack for improved air flow
• Pressurized cold air supply from the cowl area
• Simple, non-destructive installation
• Matte black powder-coated intake box
• Includes pre-oiled filter and installation hardware
• Proudly made in the USA
• Now 50 State Legal in the USA

Upgrade your Mini's intake system with the M7 Speed Silicone Intake Hose Kit, including the intake boot, hot side boot, and cold side elbow kit. Crafted from 100% silicone materials resistant to oil and chemicals, this kit offers superior durability, improved airflow, and virtually unlimited service life. Benefits include:

• Direct OE replacement part for easy installation.
• Superior durability and airflow compared to stock parts.
• Retains stock PCV connection location and size.
• No modifications or cutting required for installation.
• 33% larger inside flow volume for enhanced performance.
• Available in four standard M7 colors for customization.
• Easy DIY installation with included stainless steel clamps and instructions.

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete your MINI's intake system with silicone components. It offers a matching set for your engine bay.

M7 Speed proudly announces the release of its newly developed 100% silicone, four-ply fiber reinforced intake hose for all MINIs equipped with the N14 turbocharged engine. This direct OE replacement part provides superior durability, enhanced airflow, and virtually unlimited service life. Beyond its outstanding performance, it also adds a striking under-hood appearance that MINIs desperately need.

Unlike other similar hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit comes complete with three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part is only compatible with MINIs equipped with the N14 turbocharged engine that have one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.97” (50mm) ID at the turbo inlet.
• Easy DIY installation.

Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as other popular M7 silicone hose products, this OE replacement elbow offers enhanced durability and performance.

Key Features:

• Direct factory OE replacement with no modifications required
• Smooth and larger bend compared to the convoluted molded rubber OE part
• Resistant to age, oil reaction, high boost applications, and environmental damage
• Designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure
• Includes one silicone elbow and two high-quality lined stainless steel clamps
• Easy installation with basic hand tools
• Currently available only in BLACK

Upgrade your MINI's performance with the M7 Speed Cold Side Lower Intercooler Elbow, designed to replace the OE rubber elbow prone to failure over time. With its durable silicone construction and easy installation, this elbow is perfect for high-performance MINIs running increased boost.

M7 Pre-Intercooler Charge Pipe for MINI

Upgrade your MINI's performance with the M7 Pre-Intercooler Charge Pipe, a silicone hose designed to replace the stock piping between the turbocharger's outlet and the intercooler's inlet. Unlike OEM parts that feature restrictive piping and baffles, this charge pipe ensures uninterrupted airflow for enhanced turbocharger sound and performance.

Benefits:

• Smooth inner walls and mandrel bends allow uninterrupted airflow
• Enhances turbocharger sound for a more exhilarating driving experience
• Dyno-tested gains of 3.6 horsepower and 11.3 ft-lb of torque at the wheels
• Available in BLACK, RED, and BLUE to complement your MINI's engine bay
• Proudly made in the USA for quality assurance

This ECS intercooler replaces the stock MINIature intercooler with a MASSIVE 250% larger surface area and a 125% thicker base core! This increase in core size improves flow while cooling compressed air into the intake manifold. Cast aluminum end tanks are TIG welded and feature machined transitions for maximum flow. This intercooler features a special black powder coating to prevent fin corrosion, as well as improve overall heat transfer to insure the lowest possible outlet temperatures.

FEATURES:

250% larger surface area compared to the OEM intercooler 125% thicker intercooler core TIG welded transitions Flat black powder-coated finish BENEFITS:

Drastically lower intercooler outlet temperatures/intake air temperatures Increased airflow Reduces the likelihood of heat soak DESIGN:

The limitations of the stock intercooler were apparent throughout our testing and design process. The stock part consistently struggled to manage charge air temperatures, even under normal driving conditions. Our ECS Intercooler has been designed to improve on every restrictive element of the stock cooler, enhancing cooling efficiency by lowering intake air temperatures even compared to the R56 Cooper S aluminum intercooler, allowing you to continuously push your car without the detriment of heat soak!

This ECS Front Mount Intercooler Kit was designed, engineered, tested, and quality inspected by our Research and Development team at our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

NOTE: A performance tune is not required to run this intercooler. A tune will only increase the output of the engine when equipped with this intercooler.

**Some Prefacelift & GP2 models require slight modification inside the front bumper**

MINI R56 M7 Speed MAXX-FLO Air Intake System is the ultimate performance upgrade for your Generation 2 MINI, specifically designed to fit all R55 through R59 models with N14 & N18 Turbocharged engines, as well as the R60 Countryman and R61 Paceman. This system replaces the restrictive stock air box with a precision-fabricated aluminum frame that connects securely to the factory mounting points, making installation straightforward and hassle-free. The M7 Speed design addresses common issues found in other aftermarket systems, offering a robust and efficient solution for enhanced engine performance and sound.

• Precision Fabrication: Sturdy aluminum frame with TIG-welded construction ensures durability.
• Enhanced Airflow: Includes a 12" long x 5" diameter dual-stage super high-flow washable foam filter.
• Stylish Design: Matte black powder-coated finish with a laser-cut stainless steel M7 medallion.
• Optimal Fit: 100% silicone connection elbow fits perfectly to the factory MAF housing, available in three colors (Black, Blue, Red).
• Easy Installation: Direct replacement with no modifications required, fits securely to the factory mounting points.
• Made in the USA: Ensures top-quality construction and materials.
• Heat Protection: Recommended to pair with M7 Turbo Heat Shield (sold separately) for additional engine protection.

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit, offering a complete silicone solution for your intake system. Get a matching set for your engine bay that not only enhances performance but also looks fantastic.

M7 Speed is proud to release its 100% silicone, four-ply fiber-reinforced intake hose for all MINIs equipped with the N14 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this direct OE replacement part offers superior durability, enhanced airflow, and virtually unlimited service life. It not only boosts performance but also adds a stunning under-hood WOW factor that MINIs desperately need.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit comes with three stainless steel clamps and easy-to-follow installation instructions. Note that this part fits only MINIs equipped with the N14 turbocharged engine with one large PCV vent hose connected from the intake hose to the cam cover.

Features:

• Made from 100% silicone, resistant to oil and most chemicals.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber-reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI's performance with the newly developed M7 Speed 100% silicone four-ply fiber-reinforced intake hose. Designed as a direct OE replacement part for all MINIs equipped with the N14 turbocharged engine, this hose offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds a striking under-hood WOW factor that MINIs desperately need.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part only fits MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.

Upgrade Your MINI with the MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side

The MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side is an essential component for optimal performance. Crafted with precision and quality materials, this lower intercooler elbow ensures efficient airflow and durability for your MINI.

Key Benefits:

• Enhances airflow for improved engine performance
• Constructed with quality materials for durability
• Precision-engineered for a perfect fit
• Easy installation with no modifications required

Upgrade your MINI's performance with the MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side. This essential component enhances airflow, improving engine performance and ensuring durability. With its precision engineering and quality materials, installation is a breeze, requiring no modifications to your MINI.

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed as a direct OE replacement part for all MINIs equipped with the N14 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds a striking under-hood WOW factor that MINIs desperately need.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for hassle-free installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.

MINI N14 N18 1.6L High Flow Pre-Intercooler Charge Pipe - Red is designed to replace the stock piping between the turbocharger's outlet and the intercooler's inlet. This silicone hose eliminates restrictive factory piping and baffles, allowing for uninterrupted airflow and improved performance.

• Enhances airflow from turbocharger to intercooler
• Smooth inner walls and mandrel bends for optimal air path
• Increases horsepower and torque
• Reveals the pure sound of the turbo
• Made from durable silicone material
• Available in multiple colors: Black, Red, Blue, Green
• Proudly made in the USA