BMW A90 MKV Supra B58 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:
Stage 3 Performance Clutch Kit (for SPEC single-mass flywheel)
Stage 3 Performance Clutch Kit (for SPEC single-mass flywheel) ...
Spec Clutches - Corporate Logo
T#:394254
Part#: SB533-2
In Stock at Vendor
$ 799.00 USD
Free Shipping
Add to Wish List
$ 799.00 USD
Free Shipping
Add to Wish List
The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)
Show More Show Less
BMW N54 N55 B58 SPEC Stage 2 Performance Clutch Kit (for SPEC single-mass flywheel)
BMW N54 N55 B58 SPEC Stage 2 Performance Clutch Kit (for SPEC single-...
Spec Clutches - Corporate Logo
T#:341710
Part#: SB532-2
In Stock
$ 790.99 USD
Free Shipping
Add to Wish List
$ 790.99 USD
Free Shipping
Add to Wish List

SPEC's Stage 2 clutch features a full faced pure Kevlar disc complete with steel backing. This lining offers outstanding drivability like the Stage 1 kit, with an increased torque capacity and a longer life. The hub is double sprung with built-in spring reliefs for flexibility, along with heat treatment for added strength and durability. This clutch is best served in any situation from daily driven on the street, to drag or autocross racing events.

Kit includes:

Pressure plate
Clutch disc
Pilot bearing
Clutch Release Bearing
Clutch Alignment Tool
Clutch fork
Designed to be used with billet single mass flywheel

Show More Show Less
BFI Billet Engine Mounts - A90/A91 Supra And G29 Z4
BFI Billet Engine Mounts - A90/A91 Supra And G29 Z4
Black Forest Industries - Corporate Logo
T#:18401885
Part#: EBFI77-KA90-661
In Stock
$ 639.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 639.99 USD
Free Shipping on orders $49 and up
Add to Wish List
After being thoroughly designed and tested, BFI has released their A90/Z4 line of billet engine mounts. While maintaining comfort and reliability, these engine mounts allow your engine to perform under increased power thanks to their billet and urethane construction. Features: Creates a sturdier and longer-lasting connection to the engine. Laser-scanned to ensure perfect fitment. Billet aluminum construction
Show More Show Less
BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four
BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four ...
Black Forest Industries - Corporate Logo
T#:31158762
Part#: WBFI77-E88-501
In Stock
$ 229.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 229.99 USD
Free Shipping on orders $49 and up
Add to Wish List

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

  • Provide a polished, high-quality look by covering the open center hole
  • Are machined from 6061-T5611 aluminum for superior strength and durability
  • Feature a hand-brushed finish for a seamless OEM appearance
  • Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
  • Are sold in sets of four, with center caps not included
Show More Show Less
BMW / Supra A90 Stage 4 Performance Clutch Kit (for SPEC single-mass flywheel)
BMW / Supra A90 Stage 4 Performance Clutch Kit (for SPEC single-mass ...
Spec Clutches - Corporate Logo
T#:568757
Part#: SB534-2
Ships in 3 Business Days
$ 799.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 799.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Stage 3+ Performance Clutch Kit (for SPEC single-mass flywheel)
Stage 3+ Performance Clutch Kit (for SPEC single-mass flywheel) ...
Spec Clutches - Corporate Logo
T#:209171
Part#: SB533F-2
Ships in 1 Business Day
$ 979.00 USD
Free Shipping
Add to Wish List
$ 979.00 USD
Free Shipping
Add to Wish List
The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)
Show More Show Less
BFI Billet Engine Mounts - A90/A91 Supra And G29 Z4 - Stage 2
BFI Billet Engine Mounts - A90/A91 Supra And G29 Z4 - Stage 2 ...
Black Forest Industries - Corporate Logo
T#:18401888
Part#: EBFI77-KA90-662
Ships on Oct 30, 2026
$ 659.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 659.99 USD
Free Shipping on orders $49 and up
Add to Wish List
After being thoroughly designed and tested, BFI has released their A90/Z4 line of billet engine mounts. While maintaining comfort and reliability, these engine mounts allow your engine to perform under increased power thanks to their billet and urethane construction. Features: Creates a sturdier and longer-lasting connection to the engine. Laser-scanned to ensure perfect fitment. Billet aluminum construction
Show More Show Less
Extended Wheel Bolt - M12x1.5 - 35mm
Extended Wheel Bolt - M12x1.5 - 35mm
Black Forest Industries - Corporate Logo
T#:50899204
Part#: BFI-906-LUG
Ships on Oct 30, 2026
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Specifically engineered for vehicles utilizing a wheel stud conversion.

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Shipping