Performance Clutch Kits for BMW A90 MKV Supra B58 3.0L

Clear BMW chassis

Please ensure your correct model is selected

A performance clutch kit will allow you to drive harder under increased power levels while making sure there is nothing lost to the drivetrain. If you track your vehicle or have raised the maximum horsepower through tuning or modification, chances are you will see increased benefit by installing a high performance aftermarket clutch.
Sort By:

Spec Clutches - Corporate Logo
T#:394254
Part#: SB533-2
In Stock at Vendor
$ 799.00 USD
Free Shipping
$ 799.00 USD
Free Shipping
The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)
Show More Show Less
Spec Clutches - Corporate Logo
T#:341710
Part#: SB532-2
In Stock
$ 790.99 USD
Free Shipping
$ 790.99 USD
Free Shipping

SPEC's Stage 2 clutch features a full faced pure Kevlar disc complete with steel backing. This lining offers outstanding drivability like the Stage 1 kit, with an increased torque capacity and a longer life. The hub is double sprung with built-in spring reliefs for flexibility, along with heat treatment for added strength and durability. This clutch is best served in any situation from daily driven on the street, to drag or autocross racing events.

Kit includes:

Pressure plate
Clutch disc
Pilot bearing
Clutch Release Bearing
Clutch Alignment Tool
Clutch fork
Designed to be used with billet single mass flywheel

Show More Show Less
Spec Clutches - Corporate Logo
T#:209171
Part#: SB533F-2
Ships in 4 Business Days
$ 979.00 USD
Free Shipping
$ 979.00 USD
Free Shipping
The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)
Show More Show Less


SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41931290
Part#: SBB58A2STG3KT
Ships on Dec 14, 2026
$ 1,668.99 USD
$ 1,668.99 USD
The SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 3 is the smart choice for BMW drivers demanding uncompromised performance and dependable power delivery for both street and sport applications.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:42099841
Part#: SBB58A2STG5KT
Ships on Dec 14, 2026
$ 1,868.99 USD
$ 1,868.99 USD
This Clutch kit is rebuildable, offering long-term reliability for BMW owners pushing their vehicles to the extreme. For drivers seeking uncompromised power transfer and race-ready performance, the Stage 5 clutch kit is the ultimate choice.
Show More Show Less

ACT - Corporate Logo
T#:57543718
Part#: T1SS-B02
Ships in 7 Business Days
New Item
$ 2,136.00 USD
$ 2,136.00 USD
Engineered for high output applications, the Mod-Twin 225 HD Sprung Street Kit delivers increased torque capacity and precision driveline dampening.
ACT - Corporate Logo
T#:57543713
Part#: T1R-B02
Ships in 7 Business Days
New Item
19% off MSRP $ 2,638.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,137.00 USD
19% off MSRP
$ 2,638.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,137.00 USD
The T1R-B02 Mod-Twin 225 HD Rigid Race Kit drops into high powered setups to deliver instant, zero slip power transfer

ACT - Corporate Logo
T#:57543719
Part#: T2R-B02
Ships in 7 Business Days
New Item
$ 2,141.00 USD
$ 2,141.00 USD
When high horsepower launches demand zero slop and maximum power transfer, the Mod-Twin 225 XT Rigid Race Kit is built to deliver. Engineered for severe track abuse and fast shifts

ACT - Corporate Logo
T#:57543723
Part#: T2RS-B02
Ships in 7 Business Days
New Item
$ 2,132.00 USD
$ 2,132.00 USD
The T2RS-B02 Mod-Twin 225 XT Sprung Race Kit brings thermal endurance to aggressive street and circuit applications. Featuring a twin disc modular architecture, this kit doubles ceramic friction surface area
Show More Show Less
ACT - Corporate Logo
T#:57543716
Part#: T1RS-B02
Ships in 7 Business Days
New Item
19% off MSRP $ 2,715.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,199.00 USD
19% off MSRP
$ 2,715.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,199.00 USD
Built to withstand violent launches and relentless track abuse, the T1RS-B02 Mod-Twin 225 HD Sprung Race Kit brings true competition durability to high output platforms.
Packaged by Turner - Corporate Logo
T#:42099840
Part#: SBB58A2STG4KT
Ships on Dec 14, 2026
$ 1,668.99 USD
$ 1,668.99 USD
This Clutch kit is rebuildable, ensuring long-term reliability and performance for BMW owners pushing their vehicles to the limit. For drivers seeking a balance between race-ready performance and street drivability, this Stage 4 clutch kit is the ultimate upgrade.
Show More Show Less


ACT - Corporate Logo
T#:57543721
Part#: T2SS-B02
Ships in 7 Business Days
New Item
19% off MSRP $ 2,632.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,132.00 USD
19% off MSRP
$ 2,632.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,132.00 USD
The Mod-Twin 225 XT is built for aggressive, high boost applications that demand maximum holding power and track ready engagement. Featuring a dual plate organic layout
ACT - Corporate Logo
T#:57543720
Part#: T2S-B02
Ships in 7 Business Days
New Item
$ 2,069.00 USD
$ 2,069.00 USD
The T2S-B02 Mod-Twin 225 XT Rigid Street Kit is built for aggressive street and track drivers who need fast gear changes and high torque hold without enduring a grueling clutch pedal
ACT - Corporate Logo
T#:57543717
Part#: T1S-B02
Ships in 7 Business Days
New Item
19% off MSRP $ 2,549.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,065.00 USD
19% off MSRP
$ 2,549.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,065.00 USD
the Mod-Twin 225 HD Rigid Street Kit replaces soft factory clutches with serious motorsport hardware. By locking twin organic friction surfaces onto a single continuous spline chromoly hub, this kit eliminates hub flex and shields your transmission's input shaft
Show More Show Less

Packaged by Turner - Corporate Logo
T#:41931291
Part#: SBB58A2STG3PKT
Ships on Dec 14, 2026
$ 1,848.99 USD
$ 1,848.99 USD
The ultimate high-performance upgrade for BMW drivers seeking race-proven torque capacity, faster throttle response, and enhanced drivability for both street and track applications.

Packaged by Turner - Corporate Logo
T#:41931286
Part#: SBB58A2STG2PKT
Ships on Dec 14, 2026
$ 1,708.99 USD
Free Shipping on orders $49 and up
The SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 2+ is engineered for BMW drivers who refuse to compromise between daily comfort and serious performance.
SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 1
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:41931283
Part#: SBB58A2STG1KT
Ships on Dec 14, 2026
$ 1,552.99 USD
Free Shipping on orders $49 and up
Whether upgrading your BMW's clutch system for the first time or replacing a worn-out OEM unit, the SPEC Clutch Kit With Billet Single Mass Flywheel – Stage 1 offers the perfect blend of daily comfort and performance reliability.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:41931285
Part#: SBB58A2STG2KT
Ships on Dec 14, 2026
$ 1,659.99 USD
Free Shipping on orders $49 and up
For BMW enthusiasts who demand more from their drivetrain without sacrificing comfort, the SPEC Clutch Kit With Billet Single Mass Flywheel – Stage 2 delivers the perfect balance of performance, durability, and everyday usability.
Show More Show Less

Select Vehicle