BMW Engine Parts for BMW A90 MKV Supra B58 3.0L

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Starting at $ 52.99 USD

Add to Wish List

Starting at $ 52.99 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

VTT B58 GC-MID 2-Port Turbocharger Upgrade W/ 4" Connector & Install ...

2X Entries Into Our F80 M3 Sweepstakes

T#:9416039

Part#: B58GCMID2-4-INS

Ships in 10 Business Days

$ 2,640.99 USD

Add to Wish List

Qty

$ 2,640.99 USD

Add to Wish List

Ready to take your B58 to the next level? Don’t want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting B58 “GC” “GC-MID” and “GC+” turbocharger upgrade. VTT starts by keeping the great design elements of the factory B58 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else that could be improved upon. With the basics covered, VTT stepped it up a level adding in proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious B58 power made easy; GC’s are a drop-in B58 turbocharger upgrade that supports over 600WHP while maintaining factory spool and all factory connections including oil, water, downpipe, and charge pipe. NOTE: A tune is highly recommended to get the best performance out of this upgrade. Key Design Elements: All new castings with factory restrictions removed. No oversized wheels stuffed into factory housings here! GC is cold side and bearing housing only, GC+ is a complete unit Full 3' turbocharger inlet size with an included 3-4' silicone inlet elbow that removes ALL factory inlet restrictions 9 blade Mar-M 246 turbine wheel with the latest aero technology for increased flow while maximizing spool 9 blade “point-milled” compressor wheels with the latest aero technology to maximize flow while virtually eliminating surge Direct connection to ALL factory lines including oil, water, downpipe, and factory charge pipe Redesigned, and improved internal components including bearing housing oiling, and an upgraded thrust bearing NO CORE CHARGES. The new unit is sold to you outright. Keep your old unit in case you ever want to go back to stock. Or sell it to recoup your investment -it’s up to you! No long lead times; once fully released production units will be on the shelf for same to next day shipping (please inquire about stock levels when ordering) Full 12-month unlimited mileage/No Hassle Warranty. If you have an issue we will replace the unit no questions asked Turbocharger Purchase includes: 1 – VTT B58 “GC” turbocharger 1 – VTT B58 “GC” 3'-4' Silicone inlet elbow with adapters for factory connections 1 – 3' hose clamp for silicone inlet elbow 1 – 4' connector for inlet elbow for use with different intakes (if you are not sure you need this, order it just in case) 1 – Turbo Installation Kit from VTT

Show More Show Less

JE Piston Kit B58B30-3.228/.866/-11.1CC

T#:33746530

Part#: 371718

Back Ordered

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

JE Pistons for BMW/TOYOTA B58B30 - 3.228" Bore, .866" Pin, -11.1CC Dish Volume

Boost Your Engine’s Performance with JE Forged Pistons

These JE Pistons are built for the modern high-performance BMW B58B30 and Toyota B58 engines, providing the perfect balance of strength, precision, and durability.

Engine Compatibility: Designed for BMW B58 and Toyota B58 engines, such as those found in the Toyota Supra and BMW G20 models.
Bore Size: 3.228" (82mm) ensures proper cylinder fitment for high-performance builds.
Pin Size: 0.866" (22mm) wrist pin diameter for secure, reliable piston-rod connections.
Dish Volume: -11.1cc, designed for turbocharged applications to reduce compression and prevent detonation under high boost.
Forged 2618 Aluminum: Provides excellent strength and durability, allowing the pistons to withstand extreme conditions in both street and track environments.
Lower Compression Ratio: Specifically engineered for boosted setups, ensuring optimal performance with turbo or superchargers.
High-Temperature Coatings: Thermal coatings on the piston crowns reduce heat absorption, improving durability under high-stress conditions.
Lightweight Design: Improves throttle response and engine rev speed by reducing the overall weight of the rotating assembly.

Ready for Extreme Boost Applications

Perfect for turbocharged and high-horsepower setups, these JE pistons are built to withstand extreme boost pressures, delivering reliable performance and power gains. Whether on the track or the street, these pistons will help extract maximum potential from your BMW or Toyota B58 engine.

Show More Show Less

BMW - Toyota ULTRA SERIES B58

T#:33612885

Part#: 389616

Back Ordered

$ 1,722.99 USD

Add to Wish List

Qty

$ 1,722.99 USD

Add to Wish List

The JE Pistons for the B58 engine are high-performance forged pistons designed for BMW's 3.0L inline-six turbocharged engine. These pistons are built with aerospace-grade materials, offering superior strength and durability under extreme conditions. They feature precision-machined surfaces, optimized for high boost applications, reduced friction, and enhanced thermal management. JE Pistons are known for their lightweight design, which improves engine response, while maintaining reliability for both street and track use. Customizable options for compression ratios and coatings are often available to suit specific performance goals.

Show More Show Less

JE Piston BMW/TOYOTA B58B30

T#:33746539

Part#: 371720

Back Ordered

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

JE Pistons for BMW/TOYOTA B58B30 - 3.268" Bore, .866" Pin, -12.3CC Dish

Precision-Forged Performance for BMW and Toyota B58 Engines

Unlock the full potential of your BMW B58B30 or Toyota B58 engine with JE’s forged piston set, designed to provide durability, lower compression, and efficiency for turbocharged or high-performance builds. Whether you’re aiming for street performance or track dominance, these pistons offer the strength and reliability needed for modern forced induction engines.

Engine Compatibility: Fits both BMW B58B30 and Toyota B58 engines, making it ideal for vehicles like the Toyota Supra (A90) and BMW models such as the G29 Z4 and G20 3-Series.
Bore Size: 3.268" (83mm) bore for precise fitment, ensuring optimal sealing and performance in high-horsepower applications.
Pin Diameter: 0.866" (22mm) wrist pin for secure and reliable piston-rod engagement, even under extreme stress.
Dish Volume: -12.3cc, providing a lower compression ratio for boosted applications, perfect for turbo setups aiming for high power with reduced knock potential.
2618 Forged Aluminum Alloy: Manufactured from high-strength 2618 aluminum, renowned for its durability, heat resistance, and ability to withstand the intense conditions of high-performance engines.
Compression Control for Forced Induction: The -12.3cc dish volume is engineered for lower compression, allowing for safe tuning under high boost pressure while maintaining reliability.
Thermal Coating: Advanced coatings minimize heat absorption, improving durability under intense engine loads and extending piston life.
Lightweight Design: Optimized for reduced mass, these pistons improve throttle response and rev speed without sacrificing strength or endurance.
Track-Tested Performance: Designed and tested for both street and competition use, ensuring that you get race-level performance in your everyday build.

Built for Boosted Power and Reliability

Show More Show Less

BMW/Toyota B58B30 JE Pistons - Single

T#:33846582

Part#: 371718S

Back Ordered

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

B58 BMW JE Pistons ULTRA SERIES B58B30/3.2284

T#:33612887

Part#: 389618

Back Ordered

$ 1,722.99 USD

Add to Wish List

Qty

$ 1,722.99 USD

Add to Wish List

The JE Pistons for the B58 engine are high-performance forged pistons designed for BMW's 3.0L inline-six turbocharged engine. These pistons are built with aerospace-grade materials, offering superior strength and durability under extreme conditions. They feature precision-machined surfaces, optimized for high boost applications, reduced friction, and enhanced thermal management. JE Pistons are known for their lightweight design, which improves engine response, while maintaining reliability for both street and track use. Customizable options for compression ratios and coatings are often available to suit specific performance goals.

Show More Show Less

JE Pistons BMW - A90 Supra ULTRA SERIES B58

T#:33612886

Part#: 389617

Back Ordered

$ 1,722.99 USD

Add to Wish List

Qty

$ 1,722.99 USD

Add to Wish List

The JE Pistons for the B58 engine are high-performance forged pistons designed for BMW's 3.0L inline-six turbocharged engine. These pistons are built with aerospace-grade materials, offering superior strength and durability under extreme conditions. They feature precision-machined surfaces, optimized for high boost applications, reduced friction, and enhanced thermal management. JE Pistons are known for their lightweight design, which improves engine response, while maintaining reliability for both street and track use. Customizable options for compression ratios and coatings are often available to suit specific performance goals.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW A90 MKV Supra B58 3.0L

Sub-Categories

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

VTT B58 GC-MID 2-Port Turbocharger Upgrade W/ 4" Connector & Install ...

JE Piston Kit B58B30-3.228/.866/-11.1CC

JE Pistons for BMW/TOYOTA B58B30 - 3.228" Bore, .866" Pin, -11.1CC Dish Volume

BMW - Toyota ULTRA SERIES B58

JE Piston BMW/TOYOTA B58B30

JE Pistons for BMW/TOYOTA B58B30 - 3.268" Bore, .866" Pin, -12.3CC Dish

BMW/Toyota B58B30 JE Pistons - Single

B58 BMW JE Pistons ULTRA SERIES B58B30/3.2284

JE Pistons BMW - A90 Supra ULTRA SERIES B58

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results